Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear

See what our Experts say about this etrailer Trailer Leaf Spring Suspension

• Recommended Hanger Kit for Single Axle Double Eye Leaf Spring Trailer Suspension
  The Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear # APS2 will work well for your 1-3/4 inch wide leaf springs. Double eye springs are the style have both the bolt in the front and rear and are more common than slipper style springs that only have a bolt on the front end. Without knowing your axle capacity, I have linked the page to all your double eye spring options. All our systems are rated based on axle weight, so for a 2,000 lb axle you'd look...
  view full answer...
• Mounting Hardware Needed To Install 3,500LB Axle & Double Eye Leaf Springs on a Torsion Axle Trailer
  Here is a list of suspension kits we have that contain the hangers, shackle straps and mounting bolts for the leaf springs. Single-Axle Trailer Hanger Kit 1-1/2" Front, 1-1/4" Rear # APS2 Single-Axle Trailer Hanger Kit 3-1/4" Front, 7/8" Rear # APS5 Single-Axle Trailer Hanger Kit 1-1/2" Front, 7/8" Rear # APS1 Here are kits for just the spring hangers. Single-Axle Trailer Hanger Kit 1-1/2" Front, 1-1/4" Rear # APS3 Single-Axle Trailer Hanger Kit 3-1/4" Front, 1-1/4" Rear # APS4 We...
  view full answer...
• U-Bolt Mounting Kit for Dexter 2,000 Pound EZ Lube Axle and 1020 Leaf Springs
  The u-bolt kit associated with axle # 20440I-EZ-60 and the 1020 springs is # APUBR-10. The kit includes four 4-1/4 inch long u-bolts, two u-bolt plates, and eight 3/8"-24 hex nuts. I have linked a video showing installation for you. Current pricing is available on the product pages.
  view full answer...
• How to Determine if Slipper Spring SP-177275 Will Fit Trailer
  I can tell you how to determine if the 2-Leaf Slipper Spring for 1,000-lb Trailer Axles # SP-177275 will fit your trailer, though we do not have information regarding fits for individual trailers. The best way to determine if a slipper spring will fit is by measuring the length from the center of the spring eye to the end end of the spring, as you can see in the accompanying diagram. The best way to get an accurate length of a leaf spring is with the trailer up on jacks with the axle...
  view full answer...
  
• Replacement Components To Upgrade Harbor Freight Folding Trailer
  The Dexter Trailer Idler Axle w/ Idler Hubs - EZ-Lube - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs # 20440I-EZ-60 will be a great upgrade from the axle that comes on Harbor Freight trailers. The 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8inch Long # e84SR and hanger kit # APS2 will work well as will the u-bolts # CE23000. The Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range C # AM30630 is rated for 990 lbs each max capacity, so you will...
  view full answer...
• Switching From Slipper Spring Single Axle Trailer to Double Eye Suspension
  I recommend the Single-Axle Trailer Hanger Kit for Double-Eye Springs # APS2. With the double eye leaf spring you will need to add shackle straps to allow the leaf spring front to back movement when compressing. While the CE Smith Front Hanger Bracket # CE14016G will bolt in place where your rear mount is it will not be the correct width to be used with the double eye springs shackle straps. We have a great article "DOUBLE-EYE TRAILER SUSPENSION SYSTEM" linked below. This will help you...
  view full answer...
• Switching from Slipper to Double Eye Leaf Springs on EZ Loader Trailer
  In order to switch from slipper to double eye springs you'll need new hangers which are going to dictate your height so if you're looking to maintain the same height, you'd want to choose new hangers which are the same height as your existing. The Single-Axle Trailer Hanger Kit for Double-Eye Springs part # APS2 is a good option with 1-1/2" front and 1-1/4" rear. It can then be paired with the 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles part # e48SR. I also recommend replacing the...
  view full answer...
• Recommended Trailer Axle for 6 Foot Wide Trailer
  For a 6 foot wide trailer I recommend the Timbren Axle-Less Trailer Suspension System with Hubs - 5 on 4-1/2 - Regular Tires - 2,000 lbs # A20RS545. This system will allow you to simply attach the assembly to the frame and then use a 2 inch square bar between the assemblies in the integrated holes. If you have a cross brace at the axle location, this bar (not included) is not needed. This will give you the perfect fit on your frame and will extend the wheels to the outside of the frame....
  view full answer...
  
• Comparing the Single-Axle Trailer Hanger Kits for Double-Eye Springs APS1, APS2, and APS3
  When choosing between the Single-Axle Trailer Hanger Kit for Double-Eye Springs part # APS1, part # APS2, and part # APS3 it will be best to use the one that has measurements that most closely resemble what is already on your trailer. For example, if your rear leaf spring hangers are 7/8" tall or shorter than you would want to use part # APS1 but if they are taller then this you would want to use part # APS2 or part # APS3. The only difference between the two latter kits is that part #...
  view full answer...
• Recommended Trailer Axle and Complete Suspension System for 2K Trailer
  We have kits and parts, but not everything kitted like you are seeking but I can absolutely help you with that. I recommend starting with the Dexter Idler Trailer Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs # 20545I-EZ-60-10 or the 4 on 4 inch hubs # 20440I-EZ-60. Then you can use U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts # APUBR-10 to attach the axles to the leaf springs. For your suspension, I recommend you get the Single-Axle...
  view full answer...
• How Far Apart Should Trailer Suspension Hangers Be When Installing Them
  When mounting trailer suspension hangers like the # APS2 on a single axle trailer the key is to take the length of the spring from eye to eye and subtract 1/4 inch to determine where to place them apart. So for a 26 inch long leaf spring the distance you'd need to use when mounting the hangers would be 25-3/4 inches and you'd be set!
  view full answer...
• Do the Shackle Straps Go Inside or Outside the Leaf Spring Hanger
  The shackle straps need to be placed on the outside of the rear leaf spring hangers which you can see in the attached photo. Furthermore, the distance between the two mounting plates (inside to inside) on your leaf spring hangers should be 1-7/8", not 2" which is most likely why there is too much of a gap between the shackle straps and leaf spring. Therefore, the leaf spring hangers will need to be replaced. For this, we generally kit the single axle trailer suspension hangers and shackle...
  view full answer...
  
• Differences in the Redline Single-Axle Trailer Hanger Kits, # APS1, #APS2, and # APS3
  The APS1, APS2, and APS3 are all suspension kits for single-axle trailers with 1-3/4-inch double-eye springs. They are designed for use on trailers with single, 2,000-lb to 7,000-lb axles. The difference in the kits are in the rear hangers and the shackle straps. The Redline Single-Axle Trailer Hanger Kit, part # APS1, uses the Redline Rear Hanger, part # 30-20, which uses a steel bushing and is .91 inches tall. The shackle straps are the Shackle Strap, part # TRSL313, which are 3-1/8...
  view full answer...
• Width of Leaf Springs For Use With Single-Axle Trailer Hanger Kit APS2
  The Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear # APS2 is designed for use with 1-3/4" wide double-eye leaf springs, so it wouldn't work with 2" wide springs. Double-eye springs are standard 1-3/4" and the only hanger kits we have for 2" springs are for slipper springs. If you have 2" slipper springs instead of double-eye springs you can use the Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 3-3/4" Tall Front # APS6SE.
  view full answer...
• Solution for Needing Replacement Leaf Spring for 1883 Trailex Boat Trailer
  We don't have a leaf spring that is as long as you need but we could help. You'd need to go with a leaf spring like the part # e66SR which is for a 2,500 lb axle and has a 25-1/8 inch length. Then you could either move your current suspension hangers or you could remove the old setup and install a new hanger kit with the part # APS2.
  view full answer...
• Recommended Double Eye Leaf Springs and Hanger Kit for 3,500 Pound Axle Trailer
  For double eye leaf springs, I recommend going with the 4-Leaf Double-Eye Spring # SP210275. This spring is 25-1/8 inches long x 1-3/4 inches wide and designed for 3,500 pound axles. These springs are a common length for 3,500 pound trailers. One spring is included with the part number, so you will want to order 2 of the same spring in order to replace both sides. A suspension kit will provide you with new hangers, shackle bolts, shackle straps, and locknuts needed for your new leaf springs....
  view full answer...
• Rebuilding a Trailer and Fixing Suspension Issues
  The spring hangers should be square and you shouldn't have a gap as there is a bushing that should be in the eye of the spring to make up that difference. You may want to consider the Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear # APS2. This will give you the ability to realign your hangers and place them in the correct spots for your axle placement. I've attached an article to assist.
  view full answer...
  
• Replacement Leaf Springs for a Vintage Camper
  With how long your current springs are, you will have replace the hangers for the springs to attach to. That being said, this does happen sometimes and it is not the end of the world. The 6-Leaf Double Eye Spring # e27SR will have a length of 26 inches from eye to eye, so you will also need the # APS2 hanger kit. This will cover both hangers on both sides, so you will need no other parts to get this system up and running.
  view full answer...
  
• Comparing Different Hanger Kits ffor Single Axle Trailer with Double Eye Leaf Spring
  Hi Barney! Any of the single axle kits you listed will work just fine for your single axle trailer. The main differences between the kits you listed is their height and how they install so I'll list out the differences below and you can decide from there which option is best for your trailer. - 1-1/2" Front, 7/8" Rear (4-1/4" or 4-1/2" clearance between trailer frame and axle) - Kit # APS1 - 1-1/2" Front, 1-1/4" Rear (4" or 4-1/2" clearance between trailer frame and axle) - Kit #...
  view full answer...
• Leaf Spring, Hangers, U-Bolt Kit for 2000 Dri Doc Bass Boat Trailer
  For a leaf spring the etrailer spring part # e66SR would work great. This is a 2,500 lb axle leaf spring. Then for a hanger kit the # APS2 would be what you would want. It comes with hangers, shackles, bolts, etc. I don't know what axle diameter you have though so picking out a u-bolt kit would be a little more challenging. Most likely it is a 1-3/4 inch diameter axle though and would require the kit part # CE23000.
  view full answer...
• Switching to Double Eye Leaf Springs on a Triton Snowmobile Trailer
  It is possible to install double eye leaf springs on your trailer, yes but you will need to cut off your old hangers and install new ones. However, if the leaf springs that you had on your trailer were old and worn then there is a chance they could have become brittle and just broke due to age. This is not always an indication that there is an issue. However, when choosing a new leaf spring you will need to take your measurements while unloaded and take into consideration that leaf springs...
  view full answer...
• Do You Have A Suspension Kit With The 3-Leaf Double-Eye Spring for 2,000-lb Axles # SP-113275?
  We will not offer the 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles # SP-113275 as a kit as there are so many different options for the leaf spring when mounting to the trailer. The spring will come with a Nylon Bushing # TRBU11566 already installed. You can replace this with a Bronze Bushing # D014-077-00 if you intend to mount the leaf springs using Wet Bolts # 126B2 rather than a Shackle Bolt # 166081. Next you will have different U-Bolt Kits depending on your trailer axle....
  view full answer...
• Can 20440I-EZ-60 2,000 lb Axle be Used w/ 49 Inch Spring Center Measurements on Single Axle Trailer
  What you would need to do is have your current hangers removed and new ones welded on in order to use the Dexter Trailer Idler Axle w/ Idler Hubs - EZ-Lube - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs # 20440I-EZ-60. The # 20440I-EZ-60 wouldn't work with the spring eye measurements you currently have so this would really be the only option. I have added a link below to our entire selection of single-axle hanger kits for you to check out, each with different heights.
  view full answer...
• Parts Needed to Upgrade a Harbor Freight Axle
  The parts and quantities do look mostly good, but you would only need one of the hanger kits # APS2. These are actually sold as a full kit for one axle. As to said axle, though, it would be a good idea to double check that your spring seats match the ones that come pre-welded to the # 20440I-EZ-60. These will measure 48 inches from center to center and yours should be as close as possible to this measurement. Though the # APS2 will need to be welded on, the bolts that come with it will...
  view full answer...

Do you have a question about this Trailer Leaf Spring Suspension?