Pro Series Round, Snap-Ring Swivel Jack - Bolt On - Topwind - 10" Lift - 2,000 lbs
(286 reviews)
Price: $48.55
In Stock
Pro Series Round, Snap-Ring Swivel Jack - Bolt On - Topwind - 10" Lift - 2,000 lbs
Item # PS1400300303
Our Price: $48.55
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (286)
- Q & A (0)
- Photos
Pro Series Trailer Jack - PS1400300303
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- 1001 - 2000 lbs
- Topwind Jack
- Bolt-On
- Leveling Jacks
- Tongue Jacks
- 10 Inch Lift
- With Rectangle Foot
- Steel
- Pro Series
Retaining-ring mount fits up to a 3" x 4" tongue and lets you easily swing jack up for travel and down for use. Jack has 11" retracted height and measures 4" from mounting bracket to top, excluding handle.
Features:
- Utility jack is perfect for agricultural and commercial applications
- Convenient, spring-loaded, plunger-pin swivel feature
- Swing up to stow parallel to tongue for travel
- Move back into upright position for use
- Precision-fit parts provide exceptional stability and reliability
- Topwind handle has smooth, ergonomic design for easy cranking
- Outer tube has black paint finish
- Inner tube is zinc plated
- Bolt-on mounting bracket, mounting hardware and footplate included
Specs:
- Bracket height:
- 11" Retracted
- 21" Extended
- Lift: 10"
- Clearance: 4" from mounting bracket to top of jack
- Application: up to 3" x 4" trailer tongue
- Handle length from center of jack: 7"
- Inner tube diameter: 2"
- Outer tube diameter: 2-1/4"
- Lift capacity: 2,000 lbs
- Limited 1-year warranty
140030 Fulton Bolt-On Retaining Ring Swivel Utility Trailer Jack - Round, Topwind, 2,000 lbs
1401160317 Eclipse Round Retaining Ring Swivel Jack, Topwind, 10" Travel, 2,000 lbs
1400300303 Pro Series Round Retaining Ring Swivel Jack - Topwind - 10" Travel - 2,000 lbs
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Pro Series Round, Snap-Ring Swivel Jack - Bolt On - Topwind - 10" Lift - 2,000 lbs - PS1400300303
Average Customer Rating: 4.9 out of 5 stars (286 Customer Reviews)
Retaining-ring mount fits up to a 3" x 4" tongue and lets you easily swing jack up for travel and down for use. Jack has 11" retracted height and measures 4" from mounting bracket to top, excluding handle.by: Fausto07/23/2023
It works! Only thing that I dislike was the way the handle hangs when it’s on vertical position leaving me to zip tie it so it won’t hang during a drive.
by: William01/18/2023
I like the compact size of this swivel jack, unlike others that were so much taller. This one is the perfect size for my small utility trailer. The only option I wished it had was the option to switch out the foot pad for a wheel to easily maneuver it around.
by: Chuck04/10/2017
I needed a swing jack for my 25' boat trailer, to move it around without hitching to my truck. As you can see, by the pictures, I bolted on a 10" lawn / garden swivel caster to the foot of your jack. This way I can drop the jack down and raise the original jack up (which has a too small wheel that sinks into my soft yard). In this way I use my lawn tractor to move the boat around my yard. Hitched to my truck and the rig is to long to maneuver.
by: Drew 02/10/2024
This is not my first order through Etrailer, and if further items are needed, it will not be my last. Product availability has not been a problem, at all. Customer service has been exemplary, which is darn hard to come by these days. Product was shipped within 24 hours of placing my order. Oh yeah! I will do businesses with ETrailer again. No probs!
by: Josh M07/12/2014
This jack is perfect. It fits my trailer well, seems well built, and was easy to install. Some of the other jacks I looked at locally seemed like they were mounted loosely and would rattle around. This one is tight against the trailer and doesn't rattle while driving.
Tim
12/18/2014
Hey Josh, this is Tim. I know this question has nothing to do with the jack which I have ordered but what kind of spare tire bracket do you have?
Josh M.
1/1/2015
Hi Tim,The spare tire bracket is a Fulton bolt-on spare tire carrier. It fits nicely with the jack on my trailer.
Rachael H.
1/5/2015
Josh, thanks for the follow up. We currently offer these Fulton Spare Tire carriers: # FETCHL0700, # FETCHL0700, # FETCSTL0701, # FHDSTC0101, and the # FSTC1000301.
by: Michael S. (Oregon)02/28/2015
This jack stand #PSI1400300303, was ordered to replace a bent stationary jack on a used trailer I purchased and built up. A small 8' x 5' open trailer used for trash, firewood, moving, ect. with 2500lb axels and springs. With the tounge area being small as it was, locating the jack to swivel out of the way was exactly what I needed. The ease of use, extra clearence, height of rise was perfect when moving the trailer without the truck. Strudy skid plate, not a wheel was a bonus for my needs. Mounted easily, securely, quickly with all included hardware and instructions. Very happy with Jack and E Trailer's service and shipping.
by: Lary10/04/2016
The trailer jack that I bought from etrailer has worked beautifully in every way and I would recommend it to anyone.
While I am praising etrailer I would like to note that I built my trailer because I needed a specialized trailer to carry a railroad handcar that is transported weekly to do rail maintenance work. I knew how to weld but I had no previous experience of trailer building. I found the etrailer website and experts available by email or phone to be very helpful in guiding me in the purchase of many parts for the trailer. These pars, including such things as tail lights, wiring and hitch have been faultless. I particularly recommend the axleless torsion suspension. The set I purchased performs superbly even on very rough roads.
My experience with etrailer was so pleasant that it makes me want to build another trailer just so that I can deal with etrailer again.
by: Michael M.05/09/2016
Installation was simple. Suggest using two rachets, one on the bolt, on eon the nut. Makes it really quick. Good Product.
by: Dave F.07/24/2020
I bought this trailer jack for a utility trailer after having had problems with other jacks with other designs. This one has worked perfectly, staying out of the way when I'm not using it, but working smoothly and effectively when I do. Installation was easy, and it's worked out great!
by: Gary 06/22/2023
The Pro Series was definitely the right choice for me. This jack is way better built than the jack that came on my utility trailer. By mounting the Snap-Ring Swivel Jack I can now completely open the tailgate on my truck while the trailer is attached.
by: Tom C.09/11/2012
Works just fine. Here's a photo of it in use. Mounted to 100 gallon
portable fuel tank with 15gpm pump, meter, fuel separator. Unit is eco-friendly as it's self powered by a single solar panel constantly charging the battery that runs the pump.
by: Kevin D.12/29/2015
Jack was perfect for the trailer I installed it on. Looks quality built, price was good, shipping was fast and communications was excellent. I look forward to doing more business in the future with Etrailer.
by: John B.10/07/2011
I borrowed my nephew's trailer and bent the jack on it. Your jack saved the day, and the way it folds up will keep it from getting bent like the first one.
Here are some pics, the original bent one, the new one installed, and the new one folded up.
by: Earl06/22/2020
Jack was easy to put on, works perfectly and the price was very good.
by: Mike 01/24/2023
I replaced my fixed mount jack with this swivel model, now I can swivel it up and not rub the leg on uneven road surfaces, no more fears of damaging my jack.
by: Andy Bill08/13/2015
This swingaway trailer jack installed in about 20 minutes with no issues. It securely locks in place both the "down" and "up" positions. It also retracts without being under load, i.e., the handle will retract the jack under any use conditions. The handle may need to be secured by a small bungee cord to keep it from swinging down toward the ground. I haven't fully checked that potential issue as yet. This is one of the few jacks that has all the features I like and still gives a generous amount of ground clearance (important when placing the coupler on the hitch ball. Rated at 2000 pounds, this jack would be a bargain at twice the price.
Andy B.
8/18/2016
No issues. I use either a bungee cord or a short piece of paracord to tie the handle in place. Works well.
by: Sue 08/08/2023
Awesome product. Easy to install and use. Would recommend to everyone. Best invention they came out with!!!
by: Clark05/31/2016
My old welded on snap ring jack quit working. I bought this bolt-on replacement jack thinking I was going to use my angle grinder to take off the old one and bolt this new one on in its place. But when I took off the snap ring on the old one, I realized it was the same size as my new jack---so, I popped the snap ring off the new jack, separated the mechanism and, using the new snap ring, reapplied to the new jack. Now I have a brand new swivel jack. (Just tossed the bolts in the parts drawer).
Clark C.
5/31/2017
great! One finger spin updown to get into position.
by: Tom M.12/01/2014
I can only give this a GOOD rating because the shipment didn't include the mounting hardware as indicated. Somehow it was overlooked when the order was boxed for shipment. One quick phone call to etrailer and the install kit is on the way. Customer service was great and I hope to get the parts I need this week so I can install it this next weekend.
Tom M.
12/1/2015
Quick response from customer service and the jack installed quickly. Jack works great even after a year of use. Great product.
by: Gary S.08/03/2017
If you've ever had your trailer and boat tilt-up while you've been working in your
boat's stern area, a pair of jack stands (port and starboard sides of trailer) is a great solution!
Gary S.
8/3/2018
The trailer jack is working fine and meets my expectations. Thanks.
by: Jack F.08/08/2014
I like this jack. It swings down close to the ground, so less jacking up is necessary. It's close enough that I don't even need a block to go under it now. When it's in the up position, it can't possibly drag it on anything when the terrain is rough. I like this jack.
Jack F.
8/8/2015
Great
by: Ed M.07/10/2017
Bought this Jack, knowing it was heavier than it needed to be, for my little trailer. But I am sure glad I did. Nothing flimsy about this Jack, well made. Should last me a long time.
Ed M.
7/13/2018
Still totally happy with this jack, glad I purchased one with the flat plate instead of a wheel, that way it does not roll around. It is used on a small Tear Drop trailer, therefor you do not want it the trailer to move when youre in it.
by: Jason D07/16/2016
The jack was perfect for my little trailer. I use it to haul water and it's so heavy trying to lift tongue off of ball. Not anymore. I would definitely recommend this company. Extremely outgoing staff. Great products!
Jason D.
7/16/2017
A year and still functions like it came out of the box. No signs of wear or rust. Would highly recommend it.
by: Addison01/09/2018
I ordered a variety of products from etrailer.com to help build a custom rooftop tent trailer for a 8 week road trip. These included 2 different jacks to stabilize the trailer, wheel blocks, coupler and hitch locks, and a receiver/hitch for installation on my 2008 Honda Fit Sport. While researching and building my trailer, I was very pleased with the variety of products available on etrailer.com. It quickly became my go-to, one-stop site for all my trailer related parts. After 8 weeks on the road, all the components are still going strong and I am looking forward to many more years of adventures with my trailer! The specialty coupler and hitch locks were great for peace of mind on such a long trip, especially for the numerous occasions where my trailer sat unattended for a long duration while my girlfriend and I were out hiking, climbing, or backpacking
by: Kelly 10/12/2021
Worked perfect for our Aliner Scout Lite pops up camper. Great price, easy to use, has held up well so far. Very happy!
25
286
Show More Reviews
See what our Experts say about this Pro Series Trailer Jack
- Side-Mount Trailer Jack to Avoid Tailgate Clearance IssueUsually the best fix for tailgate-to-jack clearance issues is an extra-long ball mount that will move the trailer further away from the tailgate, such as # BM20, but since you are using a weight distribution/sway control hitch you cannot use this solution. So, the best option in your case is to change to a side-frame-mounted jack instead of the tongue-mounted jack. The linked page displays all side-mount jacks, both jacks with caster wheels like # FXPD15L and jacks with foot plates like...
view full answer... - Availability of Trailer Swivel Jack with Pneumatic TiresIf the tongue weight of your trailer is less than 500 lbs, the Trailer Valet Swivel Jack and Trailer Mover, part # STC-V211 might be a good choice. The jack swings up next to the trailer frame so it'll be out of the way of your truck tailgate and the jack features two pneumatic tires. This is the only jack we offer with pneumatic tires. If you click the provided link, you can see a demonstration video of the jack. The wheels on the jack are actually driven by one of the crank handles on...
view full answer... - Pro Series Ring Swivel Jack Trailer AccommodationPro Series Round, Snap-Ring Swivel Trailer Jack will fit trailer frame members up to 4 tall and 3 wide.
view full answer... - Trailer Jack Solution For Jack that Hits Tailgate When DownThe # PSEA20000103 is one of the shortest A-frame jacks we offer from the mounting bracket to the top of the jack at 11 inches. The best solution I can recommend would be to go with a side mounted trailer jack like part # PS1400300303 that would install on the trailer frame behind where your current jack is so that you would have tailgate clearance when needed.
view full answer... - Outer Diameter of the Mounting Bracket Tube of the Pro Series Swivel JackI went out into our warehouse and measure the mounting bracket tube of the Pro Series Swivel Jack part # PS1400300303 and found that the outer diameter of the bracket that attaches to the trailer is 2-1/2 inches. Based on that this jack should work for you.
view full answer... - Swivel Trailer Jack that Can Fit on 2-1/2 inch Diameter Pipe MountThe Pro Series jack part # PS1400300303 is designed to fit on a 2-1/2 inch diameter pipe and snap ring like you are needing so this would work great.
view full answer... - Overall Dimensions of the Pro Series Round, Snap-Ring Swivel Jack # PS1400300303I went out to the warehouse and measured the Pro Series Round, Snap-Ring Swivel Jack, item # PS1400300303, for you. The Overall height of the jack fully retracted is 17 inches. The distance, fully retracted, from the center of the mounting plate to the top of the jack at the center of the crank mechanism is 6 inches. The handle sticks up another 2-3/4 inches when in the cranking position. From the center of the mounting plate to the bottom of the jack the measurement is 11 inches when...
view full answer... - Technical Specifications For Pro Series Round, Snap-Ring Swivel Jack PS1400300303Here are the technical specifications for the Pro Series Trailer Jack, part # PS1400300303. If you have any other questions about this jack let me know and I will be glad to help you out. I have also attached a photo of the jack and the mounting hole dimensions. Lift Capacity: 2,000 lbs. Dimensions: 17.5 inches L x 10.5 inches W x 5 inches H Weight: 12.2 lbs. Handle Style: Topwind Travel: 10 in....
view full answer...
- Which Trailer Jack Do I Need for My 1994 Mastercraft Boat TrailerWe do have some options for you, however we do not have anything that matches the bolt pattern of your current jack plate. Instead of trying to match the bolt pattern of the welded plate you can get a bolt-on jack that uses U-bolts to connect to the trailer. Which jack you need will depend on the weight capacity and height of your current jack. You'll also want to make sure the U-bolts will fit around the trailer frame. I've linked our selection of bolt-on jacks for you. A few examples...
view full answer... - What is the Bolt Hole Pattern for Pro Series Round, Snap-Ring Swivel Jack, # PS1400300303For the Pro Series Round, Snap-Ring Swivel Jack, # PS1400300303, the bolt hole pattern on the mounting plate is 4-1/2 inches by 5-3/8 inches. The mounting plate can be turned 180 degrees to use these measurements either way.
view full answer... - Swivel Trailer Jack with Enough Lift to get 20 Inches from the Ground to Bottom of Trailer FrameWith Pro Series Round, Snap-Ring Swivel Jack # PS1400300303 installed it will measure 21 inches from the center of the mounting bracket to the bottom of the foot. When fully extended that would make the distance from the ground to the bottom of the frame where the jack is installed 19 inches on a 4 inch tall frame. What I recommend is Fulton F2 Swing-Up Jack # F1413230134. This jack has a mounting bracket that can be raised or lowered on the outer jack leg. This means you can adjust the...
view full answer... - Can ProSeries Round, Snap-Ring Swivel Jack, Side-Frame Mount Jack Be Used on a Travel TrailerA side-frame mount jack like the Pro Series Round, Snap-Ring Swivel Jack # PS1400300303 could be used on a travel trailer, but there are some things you will want to take into consideration. Typically, A-frame jacks are used on travel trailers to provide support at the centerline of the trailer. A side-mount jack will provide support at one side of the trailer. When possible, it is best to support the trailer at the center of the A-frame, rather than to one side or the other. Another...
view full answer... - Replacement for TWS 151DS JackIf you are going to remove the old snap ring and install a new jack you would be able to use Pro Series Round, Snap-Ring Swivel Jack - Bolt On - Topwind - 10" Lift - 2,000 lbs # PS1400300303.
view full answer... - How to Fully Open Tailgate on Truck and Not Hit the Trailer Tongue JackThe Roadmaster Dual Hitch Receiver, # RM-077-2, is designed to be used only when flat towing a vehicle. This product cannot be used when towing a trailer. Also, using any other hitch extension will cause you to loose 50 percent of your tongue weight capacity. If your truck hitch has a 300 lbs tongue weight rating, then using an extension will lower that rating to 150 lbs. The best option would be to go with a side mounted trailer jack, like the Pro Series Round Bolt-On Jack # PS1400300303....
view full answer... - Will Pro Series Jack # PS1400300303 Fit Trailer Frame of 2 inch by 3 inchYes, the frame bracket of the Pro Series jack part # PS1400300303 can easily adjust to fit a 2 inch by 3 inch trailer frame like what you have. The brackets have several holes that can vertically handle varying heights and the threads of the bolts are long enough to allow it to fit thinner frames as well.
view full answer... - Recommended Side Mount Jack With the Lowest Retracted HeightThough we do have the Pro Series Round, Snap-Ring Swivel Jack - Bolt On - Topwind - 10" Lift - 2,000 lbs # PS1400300303 that will have a 11 inch retracted height, it will be quite the different jack and does not include a wheel. We do also have the Fulton F2 Swing-Up, Wide-Track Trailer Jack, 8" Single Wheel, Sidewind, Bolt-On - 1,600 lbs Item # F1413040134, but it will fit a trailer frame up to 3 x 4. It will retract to 12-1/4 inches, but if you have a 3 x 5 frame, the Pro Series Snap-Ring...
view full answer... - Diameter of Center Shaft that Holds Handle on Pro Series Round Topwind Jack PS1400300303I went out and to our warehouse and measured the center shaft on one of our Pro Series Round, Snap-Ring Swivel Jack Topwind # PS1400300303. The shaft is 1/2 inch in diameter. If you're looking for a replacement handle, the Replacement Handle for Top Wind Style Trailer Jacks # DL22674 will work well as it use the same size (1/4 inch) hardware and is right at about the same length (7 inches). Pro Series does not offer a direct replacement jack handle. If that's not what you're after, let...
view full answer...
- Picture of Pro Series Jack PS1400300303 Installed on a TrailerIt looks like the Pro Series Jack part # PS1400300303 you referenced is installed correctly!
view full answer...
- How to Perform Oil/Grease Maintenance for the Pro Series Jack # PS1400300303I reached out to my contact at Pro Series who sent me the maintenance schedule for the Pro Series Jack # PS1400300303. You will need to remove the jack cover and essentially oil and grease all of the moving parts. I have attached the maintenance schedule they sent me so that you can reference it.
view full answer...
- Replacing an Older Fulton Swivel Jack for a Bulldog or Pro Series Swivel JackAll of our jacks have a 3 on 3 bolt hole pattern and what I recommend is switching to a bolt-on snap-ring swivel jack like the Pro Series Snap-Ring # PS1400300303 because it fits up to a 3 x 4 inch tongue and has an 10-inch lift and 2,000 pound lift capacity. Since you had the holes 2-1/2 inches horizontal and 3-inches vertical ours won't match up and hence the reason I would change to a bolt-on. Or, another solid bolt-on swivel jack is the Fulton Sidewind # FXP15L. It measures 14-1/2...
view full answer... - Will the Pro Series Round Snap-Ring Swivel Jack Bolt on a 2 Inch Trailer TongueThe Pro Series Round Snap-Ring Jack, # PS1400300303, will bolt around your 2 inch trailer tongue. This jack can bolt to frames up to 3 inches wide by 4 inches tall and will have no problem fitting on your trailer. I have attached a photo showing the bolt hole dimensions of this jack for you to check out.
view full answer...
- Recommended Trailer Jack With Foot for Homemade Utility TrailerFor a jack that is similar to the Round Swivel Marine Jack # MJ-1206B I recommend the Pro Series Round, Snap-Ring Swivel Jack # PS1400300303. This jack has a footplate instead of a wheel and has a 2,000 lb lift capacity. This features a bolt on installation and fits up to a up to 3" x 4" trailer tongue. The jack has an 11" retracted height, 21" extended height, and 10" of lift. The # PS1400300303 is also a swivel jack so you will be able to swing the jack up for travel and back down when...
view full answer... - Availability of Bolt-On Trailer Jack That Can Fit Round Tube Trailer FrameYou are correct that all bolt-on trailer jacks require a square or rectangular frame member for installation. There is no bolt-on jack made for a round tube trailer frame since this would make securing the jack rather difficult; it would want to rotate around the frame tube whenever it was under load. You will need to have some steel material welded to your frame to allow jack installation. You can use a pipe-mount type like Swivel-Type # DL22685 which includes the weld-on pipe section.
view full answer... - Top Wind Jack Replacement for Trailer that Attaches to Side of TrailerWhat we have is a bolt-on style of jack like part # PS1400300303 which can attach to the side of your trailer frame, is a topwind, and has a 2,000 lb capacity.
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Maggie M
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Written by:
Lindsey S
Installed by:
Patrick B
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Chuck
4/10/2018
Works good