Trailer Valet JXS Trailer Jack w/ Footplate and Drill Powered Option - Side Mount - Sidewind - 2K

Very well designed unit and went on my trailer with no problems. The only needed improvement I noticed was the label that runs down the side of the unit was coming off. Not really important to me since it doesn’t affect the operation of jack.1769301

by: Tiberius09/07/2022

This is such a great trailer jack, I wish I had purchased it when I bought my trailer several years ago. The option to use a drill to raise and lower is so helpful. Also, the gearing is such that I can use the hand crank on the jack very easily. Marked improvement from the one supplied by the manufacturer.

The components can be greased using the built-in zerk. The jack foot can be removed and the post seated in 3rd party supports, and the entire mechanism swings up and locks easily for travel. Plus, the foot can be fully retracted so it is almost flush with the trailer tongue when raised.

My previous jack had the hard wheel attached and, with a very low trailer and uneven parking lots of frozen dirt in the winter, sometimes I couldn't get that old jack and wheel swung down and locked without movung the rig multiple times to find a more flat parking spot so I could disconnect the trailer. Problem solved with this Trailer Valet JXS jack!

Couldn't ask for a better side mounted jack for my 23' toy trailer. High quality and reliable. No banging on it to loosen it up so you can attach, detach the trailer in the winter.

If you are thinking of a new jack, take a good look at this one. Well worth the money. You will even enjoy using it!1396686

Eric P.

9/8/2023

While I have sold the trailer with the Trailer Valet JXS jack, the year that I used it, I felt it was the best trailer jack Ive used. I am considering replacing the standard jack on my new trailer with a Trailer Valet JXC to get ready for sledding season.

Mike L.

11/1/2023

@EricP We're glad to hear that your # TV34FR trailer jack worked well for you while you had it!

by: Alex 10/16/2023

So far so good. The install was a mostly straightforward process but did involve drilling some holes in my trailer tongue. The jack works great though. It's super easy with the drill which is great when it's below zero. It's nice to avoid cranking on the handle for what seems like forever.1682686

by: Kris11/23/2023

Works well,had to modify(drill extra pair of holes) to mount to my enclosed,aluminum snowmobile trailer. But it was worth the trouble.1695530

by: Dodd04/09/2024

Easy to install. Very strong and durable. It’s a great trailer jack and you can use a drill or the handle to raise and lower the jack.1761850

Great Product and service and the answers to my questions were spot on1725331

This jack was better then I thought it would be. Very heavy duty and it what should have been on the trailer in the first place. The folks at etrailer are very helpful and can help you with finding the right item.1608993

Thisis a sturdy and well-made jack, but it is heavy. Note that adding the jack would also meaning adding around 25 lbs to the tongue weight.1630832

I had to drill a Hole through My EZ Load trailer Channel... However The Jack Easily lifts My 5,770lb Bayliner on the EZ-load Galvanized trailer...1595206

by: Sean06/11/2023

Trailer Jack rusted pretty quickly. Still works ok but looks bad.1599070

Drill jacking is convenient! 1678259

Very nice jack, fits good, works great, easy to operate with drill, fast up/down. I put it on my hydraulic dump utility trailer.1176132

Harry D.

10/12/2022

I use it alot on my trailer. Works great every time…battery in Drill lasts long time. Saves my back a lot. Glad I bought it. Highly recommend it. Lifts heavy trailer easily!

Once I got the spacing set the Valet was very easy to install. It has remained solid and there's been no loosening of the nuts and bolts. Very convenient and makes putting the trailer hitch on and off the ball much easier. A little wobbly when I set it down on my concrete garage floor but won't move around. I would recommend this for any light/medium weight trailer.1430259

I have to look it over real good because the box that it was in was destroyed also need to check everything to see if there’s any missing pieces, I should have sent it back1662617

Good heavy duty jack and nice powder coat finish smooth operation and they send the adapter for using a drill to raise n lower it plus a manual handle. And very fast shipping.1463350

This is the second time I have purchased a Trailer Valet jack. The first was for a standard trailer tounge installation. These 2 are for trailer rear stabilizers for off loading heavy equipment to keep the trailer from lifting the truck. LOVE drill raising feature. Just be careful because when you get fully up or down the drill can spin out of your hand if you don't have it braced against your leg.1315299

by: Edward 11/06/2022

Excellent jack!! Every 80 year should put one on their trailer easy to use even with the hand crank!!!!1464058

Great trailer jack, heavy built easy to install1508446

Used it for 3 months. The drill was never powerful enough to lift the boat so had to hand crank it. I tried 3 different drills. It became very hard to crank, tried greasing it. At 3 months it locked up. I've already replaced it.1424767

I got a little worried about this order since, by the time I was placing the order, the item showed as 'in stock' but took a few days and a phone call to customer service, for the order to be 'gathered' and 'shipped'. However, I couldn't be happier with the product. The jack works perfectly and the installation took me last than 5 minutes. If you are in the market for a jack, look no further. I highly recommend it!819584

This jack was easy to install, took about 15 minutes. It takes a lot less effort to manually crank than my original jack. My boat is a 19' Tracker Targa. It has a lot of tongue weight. The drill option works great with my 1/2 20 volt Ridged Drill in the low setting.
Very happy with my transaction with etrailer. Ordered online. was shipped same day. I had the package 2 days later. Shipped UPS1108328

by: Greg 02/14/2023

Very nice especially with the use of a drill to go up and down1518166

I’m using the jack for something else I can’t discuss here With you but it is going to work well so you don’t have a trailer to use this jack thank you1156106

by: Simon 07/23/2022

Easy to install. Well made. Lifts trailer no problem and can rotate both directions.1335992

You're both alone or Too Short 1562133