Round, Pipe Mount Swivel Jack w/ Footplate - Weld On - Sidewind - 10" Travel - 3,000 lbs
(269 reviews)
Price: $54.43
In Stock
Round, Pipe Mount Swivel Jack w/ Footplate - Weld On - Sidewind - 10" Travel - 3,000 lbs
Item # TJP-5001S-B
Our Price: $54.43
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (269)
- Q & A (0)
- Photos
etrailer Trailer Jack - TJP-5001S-B
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- 2001 - 3000 lbs
- Sidewind Jack
- Swivel Jack
- Pipe Mount
- Weld-On
- Leveling Jacks
- Tongue Jacks
- 10 Inch Lift
- With Rectangle Foot
- Steel
- etrailer
This swivel jack pivots up for travel and down for use. Built-in grease zerk allows for simple greasing. Retracted height is 10-1/4". Extended height is 20-1/4". Weld-on pipe mount included.
Features:
- Utility jack lets you raise and lower your trailer
- Ideal for agricultural and commercial applications
- Tubular swivel design lets you twist jack up for storage, down for use
- Pull pin with clip holds jack in place
- Lanyard connects pin to jack so it won't get lost
- Sidewind handle has zinc finish for attractive look and rust resistance
- Corrosion-resistant finishes
- Outer tube has durable black powder coat
- Inner tube and footplate have rust-resistant clear zinc finish
- Welded-on footplate minimizes sinking in soft ground
- Effortless greasing with built-in grease zerk
- Weld-on installation with included male pipe mount
Specs:
- Bracket height (from bottom of foot to center of pipe mount):
- 10-1/4" Retracted
- 20-1/4" Extended
- Travel: 10"
- Outer tube diameter: 2-1/4"
- Inner tube diameter: 2"
- Footplate dimensions: 7" long x 4" wide
- Pipe mount diameter:
- Inner: 2"
- Outer: 2-1/2"
- Handle radius: 8-1/8"
- Lift capacity: 3,000 lbs
- Support capacity: 5,000 lbs
- 1-Year warranty
TJP-5001S-B Ram Round, Pipe Mount Swivel Jack w/ Footplate - Weld On - Side Wind - 10" Travel - 3,000 lbs
Compare to Pro Series PS1401060303
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Did not arrive in time
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Round, Pipe Mount Swivel Jack w/ Footplate - Weld On - Sidewind - 10" Travel - 3,000 lbs - TJP-5001S-B
Average Customer Rating: 4.7 out of 5 stars (269 Customer Reviews)
This swivel jack pivots up for travel and down for use. Built-in grease zerk allows for simple greasing. Retracted height is 10-1/4". Extended height is 20-1/4". Weld-on pipe mount included.by: George 04/15/2024
Just what I ordered and now the cargo trailer is stabilize. Thank you.
by: George 04/11/2024
Just what the doctor ordered to stabilize the cargo trailer.
by: Allen 01/26/2024
Works very well for our application. Leveling heavy steel tables for production process. Smooth action when cranking handle and also firm stable base when foot is planted. Would highly recommend this product.
by: Paul 10/05/2023
The jacks are good quality however, I had 1 of 8 with an alignment issue for the pin that allows the jacks to pivot. Customer service sent us a replacement at no charge after seeing a picture showing the issue.
by: Margie 03/16/2023
The jacks are of good quality, a fair price, and worked well for my purpose. I mounted/welded them to a frame of a Timber King Sawmill for leveling purposes. I used 8 of them, and a couple of my mounts were not perfectly at a 90 degree angle to the saw mill frame, so some of the jacks are slightly tilted. But that was my fault, not a problem with the jacks. They operate well.
by: Dunk06/13/2021
Tongue on chipper weighs 81lbs at lift point. Jack was 5919lbs over lifting need, but shortest in mounting height..Quality product & I made it work!
Female mount on jack should only have 1 set of holes that are aligned with jack.
Pin in side hole can allow the jack to tilt or lean when under load!
by: Florin01/20/2024
Long lasting and easy to use !
by: Jamie 12/04/2023
Works just like the original
by: James 10/01/2023
Works fine. Met expectations.
by: C. Richard04/17/2019
Just what I needed to help stabilize my trailer to load and unload my tractor.
by: Glenn 07/27/2023
good product, well made as expected.
by: Matthew04/07/2018
I am very happy with this jack. I have it on my boat trailer and it is extremely well built. Being a professional welder, I tend to scrutinize welds all the time. These are extremely good. No ugly spatter, nice weld profile, well tied into the base metal. I love it.
by: Richard 06/09/2023
Good selection and quick shipping
by: Jay09/06/2019
Yes I received the Jack on the day it said it would arrive. Looks to be what I expected, and waiting to get it welded on and really test it out. I will post pics. after I have it in mounted .
Jay
9/6/2020
1 yr. down, I’ve used it quite a bit it’s still smooth and flawless ! Love it, and now I know it was the right choice!
by: Tony 06/01/2020
These jack stands are fantastic. Very easy to use and provide a lot of stability when loading onto a trailer...the end of the trailer doesn't dip down at all. These are great.
by: Sidney W.06/08/2016
Jack works great and smooth even with more than 1500lbs of static load. The small form factor makes it nice to my project of placing the jack in a tight location and I am still able to maneuver(swivel) the jack around. Shipping was fast (delivered in 3 days -- I selected the 3-5 needing no later than 6 days). Thank you for offering this product.
by: Angelo04/04/2022
The product is solid, but the packaging was horrible. I ordered 6 jacks and they arrived loose in a big box and were clearly just smashing into each other the entire delivery ride. But the jacks themselves are fine. Customer service was pretty good. I told them I was missing a pin for one of the jacks and then sent it out within a week or 2.
by: Gary 02/18/2020
This is a very heavy duty jack. etrailer was fantastic to work with. I would highly recommend etrailer to to anyone who needs trailer parts!
by: Thomas 07/21/2021
With a variety of Jack’s available, I found exactly what I was looking for. Fast shipping.
by: Justin11/08/2020
Worked well, put one on each corner of a trailer to level Treestand
by: Tony05/20/2018
Could not believe how quickly the order came to my house
The jacks I ordered are heavier than the original ones that came with our camper.
I would certainly order from trailer again.
Great product!
by: Marty 01/24/2023
The order looks great. The package is tore up very badly but everything made it. Be careful with your packing because it looks like it went thru a war.
by: Douglas 03/31/2023
fast service.quality product
by: Greg G.09/30/2016
Exactly what I was looking for. Great price and extremely fast delivery. I ordered it on Monday evening and had it on my doorstep Thursday morning. Thanks.
by: Chris04/26/2022
this product was exactly what i wanted, makes a difference on the wear and tear on my trailer. love it
25
265
Show More Reviews
See what our Experts say about this etrailer Trailer Jack
- Length of Pipe of Round, Pipe Mount Swivel Jack TJP-5001S-BThe length of the pipe itself (the round mount) is 2-1/4 inches for the Round, Pipe Mount Swivel Jack w/ Footplate - Weld On - Sidewind - 10" Travel - 3,000 lbs # TJP-5001S-B. I can't tell you for certain though whether it is long enough to mount to a 3.5 inch steel I-beam and be able to clear it when connected or swiveled. I have added a link below to a video review for you to check out as well if you'd like to take a look.
view full answer... - Weld-On Pipe Mount For The TJP-5001S-B Round Pipe Mount Swivel JackWe have just the thing! The Replacement Male Pipe # TJP-IP916 is going to be the correct weld-on male pipe mount for the # TJP-5001S-B jacks. If you need the female side to weld to the jack itself it will be part # TJP-OP916.
view full answer... - Does etrailer Bolt-On Swivel Mounting Plate Fit Jack TJP-5001S-BHey there Gary, thanks for the photo and yes the etrailer Bolt-On Swivel Mounting Plate for 3,500-lb Trailer Jacks with a 5/8" Swivel Pin # e52JR will indeed work with your Round, Pipe Mount Swivel Jack # TJP-5001S-B.
view full answer... - Total Height of Round, Pipe Mount Swivel Jack # TJP-5001S-BThe overall height of the Round, Pipe Mount Swivel Jack # TJP-5001S-B is 16-3/4 inches when fully retracted and 26-3/4 inches when extended. Basically from the center of the pipe mount to the top of the jack measures 6-1/2 inches.
view full answer...
- Dimensions and Pin Size For Round, Pipe Mount Swivel Jack # TJP-5001S-BThe Round, Pipe Mount Swivel Jack # TJP-5001S-B uses a 5/8" Diameter Pull Pin # TJP-PN58. The jack slides onto a 2" diameter weld on pipe that is included.
view full answer...
- Does the Footplate on etrailer 3K Trailer Jack TJP-5001S-B Spin when Handle is CrankedI went out to the warehouse to test the Round, Pipe Mount Swivel Jack w/ Footplate - Weld On - Sidewind - 10" Travel - 3,000 lbs Item # TJP-5001S-B for you. When cranking the handle the footplate does not spin. Going from cranking the leg from one direction to the other causes the footplate to shift a little but it does not continue to spin. I have linked a video review of this jack for you.
view full answer... - Dimensions For Round, Pipe Mount Swivel Jack # TJP-5001S-BThere is roughly 1/2" of exposed inner tube on the Round, Pipe Mount Swivel Jack # TJP-5001S-B exposed the bottom of the outer tube. This will give you a length of 9-3/4" from the center of the pipe mount to the bottom of the tube.
view full answer... - Replacement Zerk Fitting for etrailer Jack # TJP-5001S-BWe actually have a replacement zerk fitting for all of the etrailer/Ram trailer jacks with the part # Gzerk. This is a standard 1/4 inch pipe thread.
view full answer... - Replacement Mount for etrailer Round, Pipe Mount Swivel JackThe correct replacement male pipe mount for the Round, Pipe Mount Swivel Jack part # TJP-5001S-B is the Round, Pipe Mount Swivel Jack part # TJP-IP916.
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Cole B
Installed by:
Adam E
Installed by:
Aidan B
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Ronnie R
Updated by:
Mike S
Updated by:
Manda E
Written by:
Amanda M
Video by:
Jonathan Y
Video by:
Thomas T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
C. R.
4/20/2020
A year in, jacks are working great, I even ordered a set of pipe mounts to install on my trailer I carry my side by side on to use them for loading and unloading it. first class product that has made my live safer.