Round Snap Ring Swivel Jack w/ Footplate - Weld On - Sidewind - 14-1/2" Travel - 2,000 lbs
(270 reviews)
Price: $51.15
In Stock
Round Snap Ring Swivel Jack w/ Footplate - Weld On - Sidewind - 14-1/2" Travel - 2,000 lbs
Item # TJB-2002S-B
Retail:$55.35
Our Price: $51.15
You Save: 8%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (270)
- Q & A (0)
- Photos
etrailer Trailer Jack - TJB-2002S-B
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- Weld-On
- Leveling Jacks
- Tongue Jacks
- 15 Inch Lift
- With Rectangle Foot
- Steel
- etrailer
Round jack has a retracted height of 15-1/2" and an extended height of 30". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin allows you to swivel the jack up for travel and down for use.
Features:
- Utility jack lets you raise and lower your trailer
- Ideal for agricultural and commercial applications
- Retaining-ring swivel design lets you swing jack up for storage, down for use
- Deep-seated ring ensures extra side-load support
- Convenient 1/2", spring-loaded pull pin secures and releases jack
- Sidewind handle has zinc finish for attractive look and rust resistance
- Outer tube has corrosion-resistant black powder coat
- Inner tube and footplate have durable, rust-resistant, clear zinc finish
- Welded-on footplate minimizes sinking in soft ground
- Effortless greasing with built-in grease zerk
- Weld-on mounting bracket included
Specs:
- Bracket height (from bottom of foot to center of mounting plate):
- 15-1/2" Retracted
- 30" Extended
- Travel: 14-1/2"
- Outer tube diameter: 2-1/4"
- Inner tube diameter: 2"
- Footplate dimensions: 7-1/2" long x 3-7/8" wide
- Mounting bracket dimensions: 5" long x 4-1/4" wide
- Handle radius: 6-1/4"
- Lift capacity: 2,000 lbs
- Support capacity: 3,000 lbs
- 1-Year warranty
TJB-2002S-B Ram Round, Pipe Mount Swivel Jack w/ Footplate - Weld On - Side Wind - 14-1/2" Travel - 2,000 lbs
Customer Satisfaction Score:
85% were satisfied with this product
15% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
Customer Reviews
Round Snap Ring Swivel Jack w/ Footplate - Weld On - Sidewind - 14-1/2" Travel - 2,000 lbs - TJB-2002S-B
Average Customer Rating: 4.7 out of 5 stars (269 Customer Reviews)
Round jack has a retracted height of 15-1/2" and an extended height of 30". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin allows you to swivel the jack up for travel and down for use.by: Bill 02/11/2021
I bought 2 of these jacks. It has been right at a year for the time I've installed these jacks. It has work flawlessly and I would recommend this jack. I use them as levelers on the back of my trailer mounted smoker. The smoker weighs almost 2000lbs; 1910lbs to be exact.
by: Bob D.12/10/2018
Very happy with this jack. Worked perfect for the application it was purchased for as a pair of stabilizers for the rear of my utility trailer when loading my compact tractor. Quick and easy to operate.
by: Mark09/05/2018
The jack works great..I recently switched it for a weld on 5000 pound etrailer jack.... great company
by: Jeff03/30/2018
Replacing a lesser rated jack on our boat trailer. This replacement unit is well built, has great specs and was easy to install. Jack matches the description and arrived fast and packaged safely.
by: Thomas07/31/2021
The jack is as advertised and has worked very well for me. The welding and installation were easy to accomplish.
by: Michael 11/12/2022
Freight may be less with Amz prime, which could be a consideration, but product and service seem to be top notch.
by: Ljubomir05/08/2023
by: Alain 08/15/2018
I got the product in a short time span wich was awesome and put them on my sawmill so no downtime and what can I say about the price just great and quality is excellent also
Thanks Again
Mr. Alain Laniel
by: Brandon 02/07/2021
Works exactly as a jack should with no issues. Satisfied with it!
by: Modern02/07/2021
This item is a high quality product and very durable.
by: Luke04/08/2022
Easy to install and durable. No complai nts!
by: Preston 07/10/2023
all good
by: Fadi07/09/2019
Great order email follow ups and prompt delivery.Thank you.
by: Wood guy07/28/2017
Fast turn around !!!!! shipped5same day
by: Mike06/08/2023
by: Delvis11/09/2022
by: DEMJ09/15/2017
All Good
by: Glen 02/16/2024
by: Darryl01/19/2024
by: Michael 04/11/2023
by: Michael 02/06/2023
by: Charley 10/28/2021
by: Ernie 02/21/2024
I made a trailer and mounted my sawmill on it. I purchased 6 trailer jacks to use as leveling system. They are holding up well supporting the trailer,sawmill and heavy logs.
by: Anthony 02/12/2024
These work great for keeping my trailer level with the front jacks and stable for loading and unloading without having to keep my pickup hooked to my trailer
by: Dan 03/25/2024
Works well on the hitch of Haybuster bale processor. Like the bigger weld on part for mounting to machine. Cranks easy and has a nice big foot print.
25
266
Show More Reviews
See what our Experts say about this etrailer Trailer Jack
- Mounting Holes Pattern of Round Snap Ring Swivel JackThe mounting holes are 3 inches apart on center for the Round Snap Ring Swivel Jack w/ Footplate - Weld On - Sidewind - 14-1/2" Travel - 2,000 lbs # TJB-2002S-B. The head is 2-1/2 inches square for this jack as well.
view full answer... - Is There a Fulton XLT Jack Rated for 1,500LBS Which With Fit a 2-1/2" Diameter Snap Ring Bracket? Fulton's snap-ring jacks like the # FTJ120W0301 are going to top out at 1,200lbs and the 1,500LB Jack # F141132 you found has a bolt-thru design and is not offered in a snap ring. We do offer the 2,000LB Jack # TJB-2002S-B which would fit your snap-ring bracket or you could have your bracket replaced with the Fulton # P9012-00 to use the jack you found.
view full answer... - Does Round Snap Ring Swivel Jack w/ Footplate # TJB-2002S-B Bolt or Weld to TrailerActually the bracket of the Round Snap Ring Swivel Jack w/ Footplate # TJB-2002S-B that you referenced is designed to be welded to the trailer frame. There would not be enough room to fit bolt heads between the bracket and the bracket it pivots on that's on the hitch body.
view full answer... - Overall Retracted Height of Round Snap Ring Swivel Jack TJB-2002S-BWhen fully retracted the Round Snap Ring Swivel Jack # TJB-2002S-B measures 15-1/2-inches from the bottom of its foot plate up to the center of the weld-on mounting plate. You can see this in the photo I linked for you. I also measured the distance from the bottom of the footplate to the top of the handle's square housing; this measures 21-3/4-inches, also with the jack fully retracted.
view full answer...
- Can New Trailer Jack Be Installed On Trailer Using Same Mounting Hardware And Snap RingThe snap ring, part # SNP-RING that holds the etrailer sidewind jack, part # TJB-2002S-B measures 2-inches diameter. If that is the diameter of the snap ring you need for your trailer jack it may work but there is no guarantee since it is designed for # TJB-2001S-B, # TJB-2001-Z, # TJB-2002-S, and # TJB-2002S-B jacks only.
view full answer... - Thickness of Snap Ring for etrailer and Ram JacksThe Replacement Retaining Ring # SNP-RING measures 0.08 inches, but keep in mind there will be some slight variances on a per-ring basis. This is a replacement for specific jacks, which are the following Ram/etrailer jacks: TJB-2002-S, # TJB-2002S-B, # TJB-2001S-B, # TJB-2001-Z.
view full answer... - How Much Does etrailer 2K Round Snap Ring Swivel Jack TJB-2002S-B WeighRound Snap Ring Swivel Jack w/ Footplate - Weld On - Sidewind - 14-1/2" Travel - 2,000 lbs Item # TJB-2002S-B weighs about 15 pounds with a shipping weight of 16 pounds.
view full answer... - High Rated Trailer Jack Recommendation that fit Snap Ring Trailer BracketThe Fulton Jack part # FTJ120W0301 has a 1,200 lb capacity and is a high rated jack we carry with the snap ring design you referenced. For a 2,000 lb rated jack you could get the etrailer Jack part # TJB-2002S-B. This jack has the same snap ring design and would work well for you.
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Ronnie R
Updated by:
Mike S
Written by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ljubomir
5/9/2024
Great product. I mounted 2 on the rear of my 18’ hauler. It’s a must for stability when loading vehicles or other heavy items on the trailer.