Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - 12" Lift - Black - 1.5K
(99 reviews)
Price: $167.11
In Stock
Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - 12" Lift - Black - 1.5K
Item # DL22210
Our Price: $167.11
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (99)
- Q & A (0)
- Photos
Dutton-Lainson Trailer Jack - DL22210
- Boat Trailer
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- Bolt-On
- Leveling Jacks
- Tongue Jacks
- 12 Inch Lift
- With Wheel
- Steel
- Dutton-Lainson
This boat trailer jack has a black powder coat finish on the outside and a premium, 500-hour salt spray rated zinc finish on the inside for full rust protection. Caster swivels 360 degrees to make it easy to maneuver your trailer. Made in the USA.
Features:
- Supports, lifts, and lowers your boat or recreational trailer
- Swings up and down smoothly
- J-bolt handle lets you position jack quickly
- Makes it easy to move your trailer in tight spaces
- Caster turns a full 360 degrees
- Resists rust and corrosion, inside and out
- Outer tubing has a matte black powder coat finish to protect from corrosion and harsh UV rays
- Inner tubing has a premium TUFFPLATE zinc finish with a 500-hour salt spray rating
- Drain holes at bottom of inner post prevent water buildup
- Lasts for years thanks to durable steel construction
- Avoids winch posts, tool boxes, or other accessories mounted on your trailer
- Sidewind handle has a comfortable, cushioned, ergonomic grip
- Spoked wheel design adds a little stylish flair
- Incorporates grease zerks to make routine maintenance easy
- Creates a stylish flair with spoked wheel design
- Bolts around trailer frame
- Includes mounting bracket and hardware
- Made in the USA
Specs:
- Application: trailer frames up to 3" wide x 5" tall
- Lift capacity: 1,500 lbs
- Bracket height
- Retracted: 16-5/8"
- Extended: 28-5/8"
- Screw travel : 12"
- Pull pin diameter: 1/2"
- Outer tube diameter: 2-1/4"
- Handle radius: 6-1/8"
- Wheel dimensions: 8" diameter x 2-1/4" wide
- 3-Year limited warranty
You'll Need More than Just Zinc to Fight Rust
The simple truth is that salt can be highly corrosive to metal when exposure lasts for an extended period of time. So, the more you tow around it, the more you need to protect your trailer from it.
This Dutton-Lainson jack offers 2 layers of corrosion protection. The inner tubing has Dutton-Lainson's specially formulated TUFFPLATE, which is comprised of a clear zinc finish, chromate, and a sealant. On the outer tubing, there's a matte black powder coat finish putting another barrier between the jack's good looks and anything that can contribute to rust, like freshwater or even saltwater exposure.
Rust-resistant coatings are graded according to a salt spray rating. Basically, this rating shows the amount of time it takes for a material to show signs of corrosion when exposed to pure, continuous salt spray. Zinc plating typically begins to deteriorate after about 100 hours. Dacromet usually lasts for around 300 to 400 hours. Dutton-Lainson's TUFFPLATE finish lasted nearly 500 hours in the salt spray test before the first appearance of rust (about 30% longer than a standard powder coat finish). As for the first appearance of white corrosion, it performed about as well as typical zinc finishes.
The environment this test creates is much harsher than anything you'll ever experience in your journeys, but it provides a testament to how well this jack resists rust and corrosion.
How to Determine the Lift Capacity You Need in a Jack
A trailer jack lifts your trailer tongue high enough to allow you to couple it with your vehicle. Usually, your tongue weight is about 10-15% of your gross trailer weight. For example, a 10,000-lb trailer has a tongue weight of 1,000 lbs to 1,500 lbs. For this to work, you'd need a jack strong enough to lift a static load of no less than 1,500 lbs. And, yes, it's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, this should operate more efficiently, allowing you to spend less time cranking and more time camping.
22210 Dutton-Lainson Trailer Jack w/ 8" Wheel - Sidewind - Swivel - Bolt On - 12" Travel - 1,500 lbs
DLx Series trailer jack
Installation Details
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Defective
Customer Reviews
Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - 12" Lift - Black - 1.5K - DL22210
Average Customer Rating: 4.8 out of 5 stars (99 Customer Reviews)
This boat trailer jack has a black powder coat finish on the outside and a premium, 500-hour salt spray rated zinc finish on the inside for full rust protection. Caster swivels 360 degrees to make it easy to maneuver your trailer. Made in the USA.by: Robert 11/03/2023
It appears to be much better constructed that the one that is on my trailer.
by: Joe 08/24/2023
For a simple trailer jack, it doesnt get any better than this.
by: Brandon S.10/07/2019
I love this jack! I bought it for my 1984 Ski Nautique single axle trailer. Works great and looks good.
by: Stephen08/29/2020
I was originally trying to find something that would bolt upto the Shelby welded bracket. I'm so glad I went with this unit instead. It's heavy duty, large wheel for easy maneuvers, greese fittings, easy up like butta! The black color is different and goes well with my red Stingray. The customer service is over the top!
by: James 02/11/2024
Great product
by: Scott02/17/2023
Very nice jack. Seems like it’s well made. Mounting was easy. When the package arrived the mounting hardware was missing, etrailer immediately sent replacement mounting hardware and I got it in 2 days. As usual, excellent customer service from etrailer.
by: Doug10/08/2021
This jack is solid as a rock. Totally recommended. I did remove the wheel and just screwed the bolt back into the bottom of the tube for better clearance coming and going into steep driveways.
by: Larry 08/21/2021
High quality and heavy duty jack. I’m hoping the quality and the grease zeros will make make this Jack last for a long time.
Larry
8/21/2022
Jack still working as well as when new. Just greased it for the first time recently. Great product! I’d recommend it again.
by: Thomas 07/04/2022
This trailer jack is just what I needed. The range is fantastic, the handle is comfortable and raising and lowering the boat trailer has never been easier
by: Brett06/01/2022
I bent my boat trailer jack accidentally and needed a new one. So etrailer was there for me with this very nice Dutton-Lainson version similar to the one I had. Works great, very smooth gearing, and it looks good on my boat trailer too.
by: Peter 06/30/2020
The trailer jack is perfect! The price was reasonable and the product is quality. The jack shipped the day I ordered it and I had it in 3 days. It only took me 30 minutes to put it on my trailer. The 8" wheel makes moving my trailer a breeze. I would definitely recommend Etrailers!
by: Mike J04/17/2020
The new design works great with my 2002 boat trailer. Nice that their design team keeps in mind older product replacement!
by: Gregory 02/23/2023
Very fast shipping!
Thank you!
by: Ed B07/30/2019
The jack performs flawlessly so far. Highly recommend. Quality I expected
Ed B.
7/31/2020
It continues to perform well. I am pleased with my purchase
by: Craig 04/20/2021
Not a well known name. Definitely worth the money I paid for it. Very, very solid. I'd buy another without a moments hesitation if I ever need another.
by: Gil 11/03/2022
Quick and easy
by: Charles 11/14/2020
Excellet service...they were out of stock for the item I ordered (which I knew as was clear on the website) but emailed me personally to offer me alternatives immediately from stock. That is above and beyond...thank you.
by: Glenn 05/08/2021
Glenn
5/9/2022
Great, no issues with the product, I would recommend this product without hesitation.
by: Sonny04/04/2022
Quality built jack
by: Kevin 03/09/2020
Worked exactly as expected. Great response time!
by: JB02/11/2021
Works great
by: Minneapolis06/03/2022
As described. Was looking for something heavy duty and this worked!
by: William 09/05/2021
Easy to order. Exactly as advertised. Reasonably priced. Great quality. Arrived quickly.
by: Gregg 07/20/2020
Seamless experience. Thank You!
25
99
Show More Reviews
See what our Experts say about this Dutton-Lainson Trailer Jack
- Bolt Through Trailer Jack ReplacementI recommend Dutton-Lainson Round Swivel Jack w/ 2" Wide Wheel - Sidewind - 12" Lift - 1,500 lbs Item # DL22210. This jack allows you to bolt through the frame however, it comes with brackets that will fit where your existing jack sits. The mounting holes on the plate are 5-1/2" x 3-1/2". I have provided a link to a review video so you can take a look at it.
view full answer... - Will Dutton-Lainson Trailer Jack DL22210 Fit 3 x 5 Trailer Frame and Good With Salt WaterThe Dutton-Lainson Round Swivel Jack # DL22210 you asked about will fit trailer frames that are 3" x 5" but for a salt water environment there are better options. For a jack that will fit a 3" x 5" trailer frame and is designed for salt water I recommend the Fulton Bolt-Thru Swivel Marine Jack # FXP15L. This Fulton has a 600 hour salt spray rating (which the Dutton-Lainson does not), along with the same 12" lift and 1,500 lb capacity of the DL. I have added a link to a video review for...
view full answer... - Replacement Trailer Jack for my 2000 Ranger Bass Boat TrailerThe Fulton Jacks that have the 3"x5.5" bolt pattern are typically the center bolt thru style. For a replacement the Fulton Bolt-Thru Swivel Marine Jack part # F1411300301 is an excellent choice. It will replace the jack only portion of your current setup and is quite easy to swap out. It offers a 1500 lb capacity which will be perfect for your Ranger trailer. I've included a video below for you to check out. Happy Fishing!
view full answer... - Trailer Jack and Stabilizer Recommendation for Trailer that Sits 25 inches Off GroundThe Dutton-Lainson Trailer Jack part # DL22210 that you referenced can extend 28-5/8 inches from the bracket down to the ground. The scissor jacks part # UF48-979031 have a lift of up to 30 inches so they would work great as well.
view full answer... - Recommended Replacement Bolt-On Trailer Jack with 1500-lb Capacity and 11" Bracket HeightI have a solution for you, but the bracket height of the Dutton-Lainson Round Trailer Jack # DL22210 has a bracket height of 16-5/8", so it would not be short enough to be used on your trailer. I recommend usinig the Fulton F2 Swing-Up Trailer Jack # F1413020134 which has an adjustable bracket that when at its lowest setting is approximately 11" from the ground to the center of the bracket. This is a dual wheel, swiveling jack that can provide up to 10" of lift and has a 1600-lbs capacity....
view full answer...
- Swivel Jack with Wheel with Enough Lift to Lift Trailer Up 25 Inches from the GroundThe bracket height of a jack is measured from the center of the bracket to the bottom of the wheel or foot. For jack # FTJ12000101 when the jack is fully retracted as high as it will go it measures 23 inches from the bracket center to the bottom of the wheel. Depending on how tall the trailer frame is this may or may not be enough. Jack # DL22210 has an extended measurement of 26-5/8 inches so provided the trailer you have does not have a bottom-mount (underslung) coupler it will provide...
view full answer... - What Weight Capacity Jack Should I use on my 24 Foot Pontoon BoatThere is a wide range of weights when it comes to 24 foot pontoon boats. They can weigh anywhere from 2200 lbs. up to 4000ish pounds. Meaning maybe 800-1000 lbs of tongue weight. With that said the jack only needs to take care of a little more than the tongue weight really. I always go overboard on the weight needed because it will last longer simply because it isn't working at its capacity. The Dutton-Lainson Round Swivel Jack w/ 2" Wide Wheel part # DL22210 that you looked at is not...
view full answer... - Recommended Hand Crank Trailer Winch and Jack for 6K BoatThe general rule we use for selecting a boat trailer winch is 2:1 which means for a 6,000 lb boat we'd recommend a 3,000 lb winch. The Jif Marine 2-Speed Trailer Winch part # 315-W3200D is a great option for this rated at 3,200 lbs. It comes with a strap and clevis hook as well, pre-installed. It also has a two-speed operation, one for speed and one for power. You'd simply un-bolt the the old winch, drill a few holes for the new pattern, then bolt the new one in place. In regard to a new...
view full answer... - Side Wind Bolt-On Trailer Jack for Trailer with Limited Ground ClearanceI do have an option for you but I am not aware or any side mount trailer jacks similar to the Ultimate Trailer Jack part # 322-RDJ-2K in regards to how the mounting bracket can be adjusted. However, the majority of cases where the Ultimate Trailer Jack is used it is because of limited ground clearance. Therefore, I recommend using the Dutton-Lainson Round Swivel Jack w/ 2" Wide Wheel - Sidewind - 12" Lift - 1,500 lbs # DL22210. The reason I recommend the above is because there is very...
view full answer... - Snap Ring Swivel Jack for a Trailer that Already has a Jack MountJack # DL22210 isn't a snap ring jack but we do have other options that will likely work with your existing mount such as # FTJ120W0301. The hole spacing for the pull pin is 3 inches apart on center. I have linked a video review of this jack for you.
view full answer...
- Does Wheel Caster of Dutton-Lainson Round Swivel Jack # DL22210 Rotate with Inner LegThe caster wheel of the Dutton-Lainson Round Swivel Jack # DL22210 that you referenced rotates freely from the rest of the jack. The inner leg is not what rotates with the wheel. I attached a review video link for this jack with more info on it for you to check out as well.
view full answer... - Replacement for RAM 1500 Swivel Jack for Shorelandr Trailer The highest lift is going to come from the Xtreme Off-Road Ratcheting Trailer Jack w/ Dual Wheels # ARK54FR. This has a retracted bracket height of 16-3/4" and a lift of 15-1/2" for an extended height of 32-1/4". The capacity is 1,100 lbs so not as high as the RAM but it looks like your boat only weighs 4,200 lbs so the tongue weight shouldn't come close to this. To give you another option that doesn't carry such a high cost check out the Dutton-Lainson Boat Trailer Jack w/ Wheel # DL22210....
view full answer... - Best Bolt-on Corrosion Resistant Trailer Jacks for Boat TrailerI have a few options that may work for you, however, we are not aware of any stainless steel jacks on the market since the discontiuned SeaSense jack. Since you are using this jack with your boat, I recommend looking at the Fulton F2 Swing-Up, Wide-Track Trailer Jack # F1413040134. This jack features an aluminum alloy construction, and is made for marine, recreational and utility trailers. The inner and outer aluminum alloy tubes prevent rust even in the harshest environment. For a more...
view full answer... - A-Frame Trailer Jack With Wheel AttachmentYou can get the Fulton F2 Adjustable A-Frame Trailer Jack # F1413250334 but take some measurements to see if it will fit in your A-Frame coupler. I've included a diagram for you! The plate that mounts to your A-Frame coupler is 5 inches in diameter and the coupler opening needs to be more than 2-3/4 inches in diameter. Yes, the wheel attachment # F500266 is an accessory. This jack can support 2,000 lbs without the wheel and 1,600 lbs with the wheel. Since the wheel is held in by a pin...
view full answer...
- Available Sizes of Trailer Jack Caster WheelsFor an industry-standard round tube jack the largest caster wheel we have is a 6-inch size made for a 2-inch trailer jack inner tube, like the Dutton-Lainson part # DL22539 you referenced. Most such caster wheels are rated for 1200-lbs. This and similar caster wheels for 2-inch jack tubes are shown on the linked page. We do not offer adapters or spacers to enable these to fit other tubing sizes. The other page displays all of our bolt-on jacks with wheels. We do have complete jacks with...
view full answer... - What Kind Of Grease To Use In The Dutton-Lainson Round Swivel Jack DL22210The Dutton-Lainson Round Swivel Jack # DL22210 can be lubricated with really any general-purpose grease. We have the LubriMatic Multi-Purpose Lithium Grease # L11316 which is what we recommend for this application.
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Edited by:
Tyler C
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Joshua S
Installed by:
Cole B
Installed by:
Randy B
Video by:
Chris R
Written by:
Matthew S
Updated by:
Ryan F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Doug
10/8/2022
This jack is perfect. Trailer popped off the hitch once my fault and the jack took it in stride with NO damage. Love it.