Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Dutton Lanson removable wheel for Dutton Lanson A-frame trailer jacks. Part number DL22414. It's a six inch diameter wheel, it's made out of a solid thermoplastic material, it's going to stand up to the elements and many years of use. With it installed, it's easy to maneuver in your shop, garage, or driveway. The best part about it being removable, is that when you're ready to tow, or put on a different accessory, simply pull the pin, take it off, and you're done. It has a 1000 pound weight capacity, it spins 360 degrees, there are no bearings to replace.
It just spins on a bushing, there's less maintenance required. It features a zinc, tough, plate finish, which provides three times the corrosion resistance than a standard zinc plate finish. That's going to complete our look at the removable wheel for Dutton Lanson A-frame trailer jacks, part number DL22414.
Average Customer Rating: 4.7 out of 5 stars (40 Customer Reviews)
Happy to find jack wheel for non-standard tube diameter. This one is 2" outer diameter, and went onto my (approximately) 1.75" tube. Seems sturdy enough for my light trailer.
With no knowledge of what brand jack I had on a 25 year old trailer,and armed with the world wide inter-web, I was tickled to find a business with such an excellent website with the solution I needed. The "obsolete" non-modern standard jack post (most all are 2"ID these days) was easy to identify, order and was in hand quickly with professional aplomb. Thank you etrailer.com!
I originally ordered the bulldog 6" wheel but after submitting my order I immediately received an email from etrailer telling me that it was not in stock till a later date and if I wanted to replace it with the Dutton-Lainson wheel which was already in stock. So I assumed the wheel would fit the jack i ordered however the person who had emailed me about this did not know what they were doing because it did not fit. I should have never modified my order and listened to this person.
Still happy with it. It's an unusual pole diameter width, which after a long search, I could only find on your website. So thanks for having something for every size. I did have to drill holes to fit, since the ones on my trailer didn't match up with the ones on the wheel, but that was easy and no big deal.
Charlie L.
4/15/2021
Great. Perfect fit. Easy to remove and re. Initially I had to drill different holes to make it fit with the shaft that was welded to the trailer frame. But I anticipated that and that was no problem.
Hello - We ordered the Removable Wheel for Dutton-Lainson A-Frame Trailer Jack Model 6418 Item # DL22414 as a replacement wheel for our 2001 Starcraft pop-up travel trailer. Our pop-up model # is 2107. We needed a replacement wheel because we lost the wheel on a recent campout. At first, we bought something similar locally but the opening was too big. It worked a temporary fix, but this one that we bought from etrailer.com is a much closer fit. A little loose but it will do the job. Thank you.
I purchased this wheel previously for a pop up tent camper. Recently, I
purchased another camping trailer and the wheel that was supplied collapsed
when the axle failed. I liked the one I bought from etrailer for my pop up and
decided to have the comfort of knowing it would not fail me at an inopportune
time. I did have to drill out my jack which was no problem in order to be able
to insert the pin lock as the old wheel just slid on and had a twist lock which
was not that secure. This is a very sturdy wheel.
It fit my 1 7/8 tongue jack, the only one I found that fit. I would give it a hire rating if it had a tightening bolt like other similar products. Shipping and Tracking were excellent.
*Although I have not installed the trailer jack yet it looks like a direct replacement for the original one on my boat trailer. The wheel that goes with the jack definitely looks like a better fit than original.
*The electrical 4 conductor plug set... I'm using for a quick disconnect for a third
( center ) brake light for tailgaters
After scouring the internet for the odd-sized inside diameter of 1 7/8" for a trailer tongue wheel, the only place that had one was etrailer. Nice to know they are taking care of the people who don't always have the standard size of something.
I bought the a frame jack with wheel and flat stand. It fit perfectly. What I really appreciated was the detailed information etrailer folks provide. I emailed a few questions and they got back to me right away. Very good experience overall.
Product was exactly what I needed. It fit odd sized electric jack base. All I had to do was drill cross pin hole in base. Product came with the latch pin (was not expecting that) so was a pleasant surprise. Looks like good quality.. will see how it stands up to use this summer if the parks ever open back up.
The description of the product made me think that they went together but it doesn't fit the jack that I purchased. the Jack is great though and now I ordered a different wheel.
Quality part, reasonable price. Does what it's supposed to do. Easily installs/removes.
etrailer is great!
Brent K.
8/19/2021
Holding up just fine after one year!
Worked perfect , thanks goes out to etrailers experts
Gary
6/18/2021
Excellent
I appreciate the good service and prompt delivery. The tongue jack will work great on my 1955 Aljo camp trailer, with little modification. Thanks for your help.
1.75 ID removable caster wheel is just what I needed. Hard to find part.
Great rugged wheel with pin. Works good when you just need to move your trailer around in the garage .
Just what was needed to fix the problem! Fit was just right.
James
11/3/2019
Great fix for the trailer and very helpful follow up on the product.
Just what I needed. Ordered on Friday and it was here on Saturday.
Woodjunky
9/10/2018
I love the products and the value. The lights and jack are hard at work on my boat trailer. Thanks for the follow up.
Good value & quick shipping. Fit like a glove works like a charm.
Perfect part. Easy to use, durable and inexpensive. Love it!
everything worked out fine.the products i recieved were what i was looking for.thamk you
Fit perfectly. Just drilled the hole in the tube for the pin. 5 mins and it is on to stay.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
6/9/2022
I understand your frustration as no one wants to return part that will not work for them. I will have our customer service team reach out to you. For the Bulldog jack part # BD150415 you can use wheel part # BD500245.