Optronics Thinline LED Trailer Clearance or Side Marker Light - Submersible - 6 Diodes - Amber Lens

Video Transcript for Review of Optronics Optronics - Trailer Lights - MCL66APG

Today, we're going to take a look at the Optronics Submersible, Amber ThinLine LED trailer clearance, or side marker light. Now this is a rectangular LED trailer light that will function as a clearance light or a side marker light when it's properly mounted. It is a ThinLine series. So it has a nice low profile so that the light can fit into tight spaces. Sonically sealed, waterproof housing and lens. The unit is submersible and it's a durable polycarbonate housing and lens that's on it.

So also an Amber lens, which will go over the white LEDs and the LEDs make great replacements for incandescent lights. They'll last about 50 times longer. They're more efficient because they'll provide brighter light with less power output. And of course no bulbs to replace or brittle filaments to break. This side is compatible with 12 volt DC electrical systems.

It is designed to surface mount to the trailer with a mounting bracket, which we do sell separately on our website. It's part number BK66DB. And you can see it is a two wire design, includes both the power lead and the ground wire.You can see, they use the male bullet connector ends on this, and it is a non-polarized light. So basically, even though you can see the wires are white and black, you can hook it up either way for positive or negative. I am going to hook this up at the end of the video, just to show you how bright it is.

This is a DOT compliant light, so for Department of Transportation, and it is P2 rated. It does have six LEDs in it. The power draw at 12.8 volts is 0.05, seven amps, and it does have a lifetime warranty on the LEDs. Give you a few dimensions overall length on this light from one end to the other end is right at four inches overall height on it.It's going to be right at seven eighths of an inch depth on it is right at one and three sixteenths inches deep, the mounting holes. There's two of them right there.

Their measure, center to center, three inches. And again, what I'm going to do now is take our 12 volt power and I'll go ahead and put the red clip to the white wire, the black clip to the black. And I'll go ahead and turn on the power. You can see that it lights up the six LEDs. I'll go ahead and turn off the overhead lights. You can see. It gives a very bright light. Which you could use again as clear and slider side marker light. Go ahead and turn back on the overhead. And you can see what I'm going to do is we'll just switch it. So I'm going to move the black to the white wire and put the red to the black and you can see the light still lights up. So it is non-polarized, but that should do it for the review on the Optronics Submersible, Amber ThinLine LED trailer clearance, our side marker light..