Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" - Qty 1
(2477 reviews)
Price: $89.23
Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" - Qty 1
Item # HP96VR
Our Price: $89.23
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (2477)
- Q & A (0)
- Photos
etrailer Trailer Fenders - HP96VR
- 13 Inch Wheels
- 14 Inch Wheels
- 15 Inch Wheels
- For Single-Axle Trailers
- Aluminum
- 33 Inch Long
- Bolt-On
- Weld-On
- 10 Inch Wide
- No Step
- Diamond Plate
- etrailer
10" Wide x 33" long x 17" tall. Excellent for boat trailers, this diamond plate aluminum, PVC-coated, Jeep-style trailer fender can stand up to rust, corrosion, and scratches while you're on the road. Easily bolt onto your trailer.
Features:
- Jeep-style fender covers 1 tire on your single-axle trailer
- Blocks road debris from hitting other vehicles and helps protect your trailer's cargo
- Classic Jeep design with diamond tread offers a rugged look for your trailer
- Rustproof, corrosion-resistant aluminum construction
- 16-Gauge aluminum diamond plate is stylish and rugged
- PVC coating protects from scratches and scuffs
- Bolt-on installation - drilling and purchase of mounting brackets (sold separately) required
- Made in the USA
Specs:
- Application: single-axle trailers with 13" to 15" diameter wheels
- Dimensions: 33" long x 10" wide x 17" tall
- Quantity: 1 fender
- Weight: 4 lbs
- 1-Year limited warranty
Tips for Replacing and Installing Trailer Fenders
- Do your best to match the dimensions of the new fender to your old one.
- If a fender was damaged during a blowout, use the opposite fender to get the dimensions.
- As with all trailer maintenance, don't forget to chock your wheels before getting started.
- For a bolt-on fender, use your existing mounting hardware, if possible.
- The old mounting bolts or screws might be stripped or rusted, in which case you'll need to tap them out and buy new hardware.
- If removing an old, welded-on fender, either carefully chisel it off yourself or take your trailer to a weld shop to have the fender professionally removed.
- Before you start drilling, position the fender where you need it and center it over your wheel well.
- Mark where you need to drill (measure twice, drill once).
- Don't tighten down the mounting hardware completely until you're sure the fender is mounted correctly.
Rustproof Aluminum Construction
Aluminum offers excellent, long-term defense against rust and corrosion. It is naturally rustproof, unlike steel, which must be treated with a rust-resistant coating that can break down over time. Aluminum is lightweight yet durable, making it suitable for heavy-duty, outdoor, and saltwater applications.
MFJ00007 Single Axle Jeep-Style Trailer Fender - Aluminum Tread Plate - 13" to 15" Wheels - Quantity 1
Replaces J101733AT
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Alternate product found
Customer Reviews
Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" - Qty 1 - HP96VR
Average Customer Rating: 4.8 out of 5 stars (2477 Customer Reviews)
10" Wide x 33" long x 17" tall. Excellent for boat trailers, this diamond plate aluminum, PVC-coated, Jeep-style trailer fender can stand up to rust, corrosion, and scratches while you're on the road. Easily bolt onto your trailer.by: Facility Manager02/08/2024
This trailer fender worked great on my 5*8 box trailer. Easy to install, looks great, and is in great condition a year later.
by: Larry scott12/23/2023
This is my second one,the first one look so good I bought another one.
by: Noel 04/05/2024
This was the exact part I needed. Very grateful to find such a reasonably priced replacement. I’ll probably replace the other side just to match because this one looks so nice.
by: Victor 02/14/2024
Perfect Replacement part. Very fast shipping. Thank you!
by: ffjeffro03/22/2024
Perfect fit and not paper thin like the manufacturer. So much better than oem that I bought another for other side.
by: Terry S.07/09/2021
Tire blew on Interstate, took original fender with it. Original was 9" deep, all I could find for replacement were 10" deep, so I replaced both. Install was easy, measure twice, screw once!
by: Suzie09/13/2023
Great fender!! Easy to install and looks good on my trailer. I recommend this fender.
by: Larry 11/11/2023
The fender was not an exact match but made it work. This Fender was about 1-1/2 too short on the ends.
Fender arrived in perfect condition enclosed in a heavy enough box the part survived the shipping no problem.
by: Ralph 03/14/2024
Everything came in great shape compared to last the stuff I got ! nice packing job !
by: Floyd 03/20/2024
good job on getting the out
by: Robert 08/02/2023
Nice fender. Fit the trailer. Dimensions were accurate. Easy to install.
by: Lisa 03/06/2024
They look great!
by: Carole08/09/2018
Great product! Arrived quickly and was a perfect replacement for the worn out fenders on our 21 year old trailer.
by: David 08/31/2023
Good customer service … answered my questions accurately
by: Marvin 11/05/2023
Great fender, quick service, fits my Jayco Hummingbird perfect and dresses up the look!
by: Kenneth 05/24/2023
E trailer has everything I need all in one place
Great pricing
Great fast shipping
by: Brian 02/19/2023
Ordered a trailer fender. Process was easy and clear, just the way it should be. I'll be back for trailer needs for sure.
by: Dan 11/06/2023
Fast shipping easy order thank you....
by: Larry 11/30/2023
Fit my Trailer perfectly,and it looks g ood!
by: Douglas 11/22/2023
Just the one I needed!
by: Ernest 12/12/2023
Always excellent service
by: Don S.08/12/2013
I ordered these fenders even though they said "weld on" application. I screwed these on to my trailer with 1/4" self tapping screws and then applied a bead of clear silicone to the lip against the trailer. They word perfectly, were very solid and I am extremely please with my purchase. I would highly recommend these to anyone replacing existing fenders.
by: Jorge08/16/2023
Excellent product and service. Quick shipping and delivery plus great customer service. recommended.
by: Christopher 09/22/2023
Shipping was super fast and cheap and pricing for items was very competitive
by: William07/18/2022
I would give you guys a 5 excellent prompt service and shipping
25
2470
Show More Reviews
See what our Experts say about this etrailer Trailer Fenders
- Thickness of etrailer HP96VR Jeep-Style FenderThe etrailer brand # HP96VR Jeep-style fender is constructed of 16 gauge aluminum diamond plate. You can see a product description video by clicking the provided link.
view full answer... - Replacement Fender Options for Haulmark Single Axle FenderI do have an option for you but we only offer universal trailer fenders, nothing specific to any one trailer. The Single Axle Jeep Style Trailer Fender part # HP96VR for diamond plate or part # HP76VR are two suitable options under the jeep style category designed for 13-15" wheels.
view full answer... - Available Trailer Fenders and Galvanized 14-Inch Trailer Wheels & TiresThe Redline Jeep Style Aluminum Tread Plate Single Axle Trailer Fender # HP96VR does not carry a weight capacity rating since it has no steps like those found on fender # F008595-2, which is rated for 300-lbs. The trailer fenders we offer do not include mounting brackets or hardware since trailers can differ so much in where and how fenders can be installed. I included a link to all available fender mounting brackets. Our 14-inch galvanized trailer wheels can be seen by clicking on the...
view full answer... - Bottom OF Fender Width for the Single Axle Trailer Fender # HP96VRThe width at the bottom of the Single Axle Trailer Fender # HP96VR that you referenced is 33 inches.
view full answer...
- Aluminum Fender Recommendation For TrailerWe do offer an aluminum trailer fender but it does not feature the backing used for mounting like part # HP36VR. The aluminum fender we carry is part # HP96VR. The installation of this fender is done by drilling and using mounting screws in the lip of the fender. I have attached a link to a video that shows how these fenders are installer.
view full answer... - Timbren Axeless Suspension and Other Parts Needed to Build Lightweight TrailerThanks for the detailed information! I will be happy to help you set up your trailer and give you accurate weights. We have an in house system that gives us specific product weights. The Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Drop Spindle - Off-Road Tires - 2,000 lbs item # ASR2KHDS09 have a weight of 98 lbs. The Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - item # AKHD-545-35-EZ-K The Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10"...
view full answer... - How to Attach Aluminum Tread Plate Fender Part # HP96VRThe Aluminum Tread Plate fender you referenced, part # HP96VR is designed as a weld-on application, therefore mounting brackets are not included. We do not carry any mounting brackets specifically designed for these fenders, you would probably need to have brackets fabricated and welded to the fender in order to stiffen it and provide a larger mounting surface. The inside lip of the fender is only 1/2 an inch wide, which would not provide enough room to securely bolt the fender in place.
view full answer... - Can etrailer Aluminum Tread Plate Trailer Fender Fit Boat TrailerThe etrailer brand Aluminum Tread Plate Trailer Fender, part # HP96VR measures 10 inches wide by 33 inches long by 17 inches tall and is designed for 13 to 15 inch wheels. This is a weld-on or bolt-on application. To install on your boat trailer you will need to consider how it is to be attached, and how much of a mounting surface you have. I have attached a link to an installation video for this fender you can check out. I recommend using a professional welder if that is the route you...
view full answer... - Replacement Weld-On Fender for 13 inch WheelsWe do have a wide variety of replacement fender options, and while none of them match your current specs directly, you could go ahead and replace both fenders so that everything matches up. The fender we have that closest matches your description is the Single Axle Jeep Style Trailer Fender # HP96VR which will fit for your 13" wheels but it measures 33" long x 10" wide x 17" tall so it's a bit wider than what you currently have. I'm attaching a link to our selection of fenders for 13"...
view full answer... - Recommended Aluminum Trailer Fenders For 14 Inch WheelsWe do offer a couple of aluminum fenders designed to work with 14 inch wheels. For a Jeep-Style design I recommend part # HP96VR. This is designed to work with 13 to 15 inch wheels, and measures 10 x 33 x 17 inches. The fender has a 1/2 inch lip on the radius. I have attached a product review video for this fender you can check out. The other aluminum fender we carry that is designed to work with 14 inch wheels is part # CE17100ATB. This fender has the aluminum tread design and measures...
view full answer... - Aluminum or Steel Trailer Fenders for 15 Inch Wheels with Diamond Tread Plate DesignFor 15 inch tires we have the following fenders. Please note that at this time we do not have any options for tandem axles: Jeep style fender # HP96VR, aluminum, tread plate or CE Smith Jeep style # CE18041ATB, aluminum, tread plate, 36 inches long (We do not have the rounded version that you were asking
view full answer... - Trailer Fender Recommendation for a 1999 Interstate Enclosed TrailerThe Jeep-Style, Single-Axle Trailer Fender, # HP76VR, can be bolted on to a trailer but you would have to make sure it is secure to the trailer, will not rub the wheels, and is centered. The biggest issue is to make sure it is secure. It will require drilling into both the fender and the trailer as you are aware. It would be best for this fender to be welded on. With an aluminum trailer and steel fender, this will not be feasible, so it would be better to find the best match fender for...
view full answer... - Aluminum Tread Plate Trailer Fender # HP96VR RecommendationIf you are looking for a fender for your trailer that will resist corrosion I would recommend the Aluminum Tread Plate Trailer Fender # HP96VR as it is made of aluminum and will resist corrosion more than steel. The 16-Gauge Steel, Single-Axle Trailer Fender # HP29VR that you referenced is not galvanized and would be a lot more susceptible to rust and corrosion than the # HP96VR .
view full answer... - Thickness of the Aluminum of the Jeep Fender HP96VRI went out to the warehouse to measure an Aluminum Tread Plate, Jeep-Style, Single-Axle Trailer Fender, # HP96VR. The aluminum is just over 1/16 of an inch thick (0.065 inches).
view full answer... - Recommended Replacement Fenders For A 2010 Hallmark Transport TrailerWhen it comes to replacing your fenders on your 2010 10x6 Hallmark Transport Trailer you indeed can install The Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13 inch to 15 inch - Qty 1 # HP96VR. When attaching the fenders # HP96VR to your trailer you will need The Mounting Brackets for Trailer Fender - 13 inch/14 inch/15 inch Wheels - Galvanized Steel - Qty 2 # CE26098G-2 you will not be able to attach the fenders directly to the trailer. 2 brackets are needed to mount...
view full answer... - Availability of 33 Inch x 10 Inch x 18 Inch Trailer FenderThe closest trailer fender we have available to the dimensions you mentioned is a Jeep Style Fender like the etrailer brand # HP96VR. This aluminum fender is 33 inches long, 10 inches wide and 17 inches tall. It is designed to fit with 13-15 inch wheels and can be installed as a bolt-on or weld-on application. For a standard fender, the closest option we have is the etrailer Single Axle Fender # HP56VR. This is a 16-gauge steel fender that is 32 inches long, 9 inches wide, and 15 inches...
view full answer... - Replacement Jeep Style Fender Recommendation For 15 Inch WheelWe offer 2 different Jeep Style fenders that are designed to work with 15 inch wheels. The aluminum fender we carry is the etrailer brand Trailer fender, part # HP96VR. This fender has a 1/2 inch radius lip on both the front and the back of the fender and has an aluminum tread plate design. I have attached an installation video for this fender you can check out. The second jeep Style fender we offer is part # HP76VR. This is a 16 gauge steel fender that is a weld-on application.
view full answer... - How Thick is the Aluminum on Aluminum Tread Plate Jeep-Style Single-Axle Trailer Fender # HP96VRI went out to the warehouse to measure an Aluminum Tread Plate, Jeep-Style, Single-Axle Trailer Fender, # HP96VR. The aluminum is just over 1/16 of an inch thick (0.065 inches).
view full answer... - Availability of 10 Inch Wide Jeep Style Trailer FenderThe Single Axle Jeep Style Trailer Fender # HP96VR has a width of 10". However, it is taller and longer when compared to the # HP49VR. The overall dimensions are 33" long x 10" wide x 17" tall and it is designed for 13" to 15" diameter wheels. If you are looking for the same 24" length and 8" height, the # HP49VR is the only available option.
view full answer... - Looking for Aluminum Jeep-Style Fenders for Haulmark TrailerWe do offer Jeep-style fenders. You can see our selection by clicking the provided link. We have two different aluminum tread plate fenders, part # HP49VR, designed for 8-12 inch wheels or part # HP96VR designed for 13-15 inch wheels. We also offer steel Jeep-style fenders, # J10821 for 10 inch wheels, and # HP76VR for 13-15 inch wheels.
view full answer... - Mounting the Aluminum Tread Plate, Jeep-Style, Single-Axle Trailer FenderThe Aluminum Tread Plate, Jeep-Style, Single-Axle Trailer Fender, item # HP96VR is designed for a weld on application and putting screws and washers through the lip on the inside of the fender would most likely not last. If these fenders were to be installed on a steel trailer you would need to have an aluminum mounting bracket welded to the inside edge of the fenders that could be used to stiffen the fender and give additional mounting points. We do have steel fenders available that should...
view full answer... - Trailer Fenders Compatible with 12 Inch Wheels and Brackets 27 Inches ApartFor your retrofitted kayak trailer I recommend the Single Axle Trailer Fender - 16 Gauge Steel - 13" to 14" Wheels - Qty 1 # HP89VR which have a span of 28 inches. This fender is designed for larger tires and has a 28 inch overall span, so when mounting to your brackets it will fit on the inside of your brackets. If you want to go over the brackets then the Single Axle Trailer Fender - Jeep Style - Aluminum Tread Plate - 13" to 15" Wheels - Qty 1 # HP96VR may be more the route to go....
view full answer...
- Recommendations For A 10" x 32" x 17" Polished Trailer FenderThe fender we have that matches your needs the closest will be the Single Axle Jeep Style Trailer Fender # HP96VR. This has a polished diamond plate aluminum finish and measures 10" Wide, 33" long, and 17" tall, but is the boxier and squared Jeep style look. If that doesn't suit you, the only other options we have that will be similar in size will be the Ribbed Steel # HP49FR and the Cold Rolled Steel # HP29VR. Both of these will measure 10-3/4" Wide, 32" long, and 15-1/4" tall, but will...
view full answer... - Jeep Style Aluminum Fender Recommendation for Off Road Tear Drop CamperThe Single Axle Trailer Fender # HP96VR that you referenced would be a great choice for a fender for your trailer, BUT I cannot recommend you use a set of Jeep rims on your trailer. You really need to use a rim and tire designed and rated for use on a trailer. I attached a link to a page that has all of the trailer rims we carry plus a link to an install video for this fender for you to check out. The dimensions of the fender are 10" wide x 33" long x 17" tall. You should haven't a problem...
view full answer...
Do you have a question about this Trailer Fender?
Info for this part was:
Expert Research:
Mike L
Edited by:
Lindsey S
Installed by:
Jeff D
Updated by:
Wilson B
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Don S.
2/10/2015
Approximately 6 months after I installed the fenders I started to notice small cracks at the bend seam of one of the fenders. A few months later the other side started to develop the same cracks. It seems the cracks are a result of the wind pressure hitting the front surface of the fender while traveling. Looking in my mirrors while driving the fenders are shaking back and forth in the wind and after a while the cracks start developing. The solution to this problem would be for the manufacture to increase the thickness of the fender for more stability. If they were a bit thicker they might not have cracked. I am going to take the trailer to a welding ship and see how much it would cost to weld a flat piece of bar srock to the underside of the fender along the bend for additional support. Also the cracks can be welded as well but without the extra bars for support they would probably just crack again.