Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The popular and efficient, trigger-style latch on this corrosion-resistant, straight-tongue coupler helps to make hookup quick, easy and secure.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. Aiden here with etrailer.com. And today we're gonna be taking a look at these two trailer couplers from Fulton. These are their fast lock couplers and they're gonna be pretty much the exact same both compatible with a two inch ball both featuring a three inch channel here. So just make sure you pick out the right one for your ball mount and for your trailer. Let's check them out.
So right away, really the only difference between these two is this larger one is going to be a 5,000 pound weight capacity and our smaller or shorter one here is going to be a 3,500 pound weight capacity. So again, just look at what you're gonna be hauling and what kind of capacity you need and pick the right one out for you. They're both gonna mount up the same way though. They've got a three inch hole spacing center to center for those side mounting holes. So all we had to do was just take out our old hardware from our old coupler and pop this one right in, and it was a direct replacement.
One minor thing that we did notice when we we're looking at these is that this 3,500 pound one does have a slightly longer lever here. The actual trigger for the latch right there is the same but this little part that covers it is a bit longer on this one. Like we just mentioned, they do have that trigger style latch. It is pretty easy to operate, get it all locked down. And then of course we'd want to run a pin or maybe even a locking pin through here to make sure it's secure.
You can find those at our site here if you need one. And overall this does feel pretty smooth when I'm operating it. One thing I'd worry about is the longevity of that, though. That is sort of a problem that I've seen with this trigger style latch is that it might be really smooth out of the box but over a long period of time, these parts might begin to seize up a bit, which is why some of those easy latch ones are a bit nicer and easier to use. But we do have a fair few reviews on our site from people who have had this for a year or more saying that it's actually held up really well and that the coating has protected it from any sort of rest or corrosion.
So that's good to hear. And you can see here on the inside of the one that's not installed, as I'm opening and closing that lever, everything in here with the jaw moves really smoothly. So that's really great to see too. These are both gonna have a zinc coating, so that should keep things nice and resistant to rust and corrosion, water shouldn't be too much of an issue especially if you're leaving it outside. Like I mentioned before, the install process is really simple. We just had to take our old one off, put the new one in its place and all the holes lined up pretty well. So just check out how we did it. Now, the first thing you wanna do is make sure you get the old coupler removed and more than likely, if you don't have new hardware set aside you will wanna save this hardware that you take off because the new one will not come with hardware. Then we can take our new coupler and just slide it over where that old one was. And luckily all of our previous holes will line up as well, because we checked that three inch hole spacing. And then we can just run our old hardware back through to attach it. So our holes from the old coupler didn't line up perfectly. All we had to do was just come back through with the drill bit. We kind of use the coupler as a template and just enlarged the holes a bit and everything's fitting much better now. And that's about it for the install. Really, the only thing you gotta worry about is if that hole spacing is correct from your old coupler and if need be enlarge those holes. And then just making sure you've got hardware, whether you're reusing or picking up some new ones. Other than that, though, that's it for this Fulton coupler. Thanks for watching..
Average Customer Rating: 4.8 out of 5 stars (354 Customer Reviews)
The popular and efficient, trigger-style latch on this corrosion-resistant, straight-tongue coupler helps to make hookup quick, easy and secure.I just received the coupler and it is stout, I haven't had a chance to mount it yet but I don't anticipate any problems.
Etrailer is always easy to deal with!
These hubs save time being pre-greased witch means alot for shop production. Shipped on time as always.
Great price on my item. Best customer service in the market in my opinion. Calm, Cool, Collected. Like a well oiled machine.
Our old trailer’s hitch was rusty and this was a no-brainer to fit over the tongue.
Ordered on Monday got it Thursday always good service. Coupler works great looks a lot better than the rusty one that was on the trailer. The trailer is aluminum so it looks like new again.
Th hitch installed without any problems. The only issue with the hitch is you have to have the ball positioned exacting right or the locking tongue will get jammed and the ball will not seat. It might take a few tries before you get it positioned correctly.
Barryw
3/27/2020
Fair
Correct item promptly shipped at a fair price. Thank you!
I purchased a fin keel sailboat on a Trail Rite trailer in Oklahoma and upon getting the rig back to Colorado, I had to replace the surge brake receiver as it was completely rusted out. I purchased this receiver to replace the defective hydraulic version as well as purchasing a complete electrical brake system (drums, shoes, wheels, wiring and tires) to complete the changeover. Everything from etrailer has worked as intended.
Exact replacement for same item that came with my Trailex car trailer in 2002. Orig was just tired out from use. E-Trailer was great to do business with.
Jd
1/23/2018
It was/is perfect. like having a new trailer.
the fas-lok coupler fit perfect on my ez-loader trailer. but payed for 2 day shipping took 5days to get it.
Joe D.
7/28/2016
perfect fit
every component of the trailer for my 17ft boat was getting a little ratty. Salt water is a B. Replaced the jack, winch and coupler with parts from etrailer and don't have a single complaint. Good products, shipped quickly, good support. Thanks all.
Hitch coupler arrived and I had it bolted on in about 5 minutes. Looks good and is better than the one it replaced. Thanks for the quick delivery and the video response to a question that I had.
Everything I get from etrailer is the best, always a first class product. Service is the best,fast and Jonny on the spot. Your the best none better!
I have a Shoreline boat trailer from the early 90's that needed a new coupler. The coupler I was replacing had mounting holes drilled 1" to center from the top of the outside of the unit. Most couplers place this hole at 1 1/4" from the top which would leave the coupler sitting with a gap between the top of the square beam and the coupler.
If your trailer has this less common hole placement, this coupler is a great looking and functioning unit.
Just installed my hitch to my boat trailer. I replaced my 1 7/8 in ball hitch with the new 2". Mounting holes were identical to my old hitch so it only took 15 minutes to put the new hitch on. Great quality at a good price. I am a repeat customer of etrailer and all has been good.
We are long time customers of etrailer.com. Hitches, ball mounts and trailer couplers. We have been satisfied with the value, quick shipping and customer service provided for every purchase. We highly recommend etrailer.com for every towing, trailer & tow vehicle product. Christine & Ron Peters, Culver, IN.
Coupler was as described...excellent build quality and clearly up to the task of towing my 4,500 lb boat/trailer. Fit was very good.
Paul G.
9/11/2018
After one year of use, still very happy with this product. Fit and function are excellent. Finish is as good as the day I installed it. Very happy with this coupler.
I ordered this coupler for a Kayak trailer project I'm planning to do.
The price was very competitive and I received it faster than advertised. I'm very pleased with the quality of this product.
Deric M.
3/21/2015
Works fantastic, does exactly what I wanted.
This was nice. I love the easy lock mechanism. High quality and great price. I replaced a hydraulic coupler (went to electric brakes) and this works great. Very easy to load and latch. Used on a 4 place atv/snowmobile trailer.
Fast turn around. Replaced the coupler on my Bayliner boat trailor. Works great and heavier than the original equipment.
Thank you etrailer!
Highly recommend etrailer retail!
Robby
5/13/2022
One year later the Coupler is working Great! Totally met my needs.
Received coupler through USPS box had one corner torn but coupler was not damaged. Installed it today, went on without any problems, perfect fit.Thanks Etrailer I'll be using your services again.
Big R.
3/30/2016
All is good Thanks Rachael for your follow-up, hoping to be using trailer more this year.
I upgraded my old rusted 3,500 lb. coupler to this 5,000 lb. one for a great price. Best part of the bargain was that shipping was only $7.99. eTrailer personnel even called as soon as I had placed the online order to tell me that they were waiting for restock of the part; that I could substitute for another brand or wait a week for my original request. Great prices and customer service!
Just wanted to say that etrailer provided the items I ordered in premium condition and the packaging was done in such a manner that all items were protected during shipping. It did take a little longer to get the items than I expected, however, it was worth the wait.
Although made in China, quality appears very good with smooth operation, positive clamping and excellent fit. All hole are properly punched with exacting location. Used this unit to replace a surge brake hydraulic coupler of equal gauge material.
Looked like a good coupler but I sent it back. Made in China.
Jenny N.
1/31/2023
We do have couplers from Demco that are made in the USA. They are part # DM12717 and part # DM15000-52. They are rated at a 10,000-pound capacity.
Do you have a question about this Straight Tongue Trailer Coupler?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Eric
10/20/2022
This hitch has enabled us to put new life into our old useless trailer.