bing tracking image
  1. Trailer Leaf Spring Suspension
  2. etrailer
  3. Hangers
  4. Suspension Kits
  5. Boat Trailer
  6. Camper
  7. Car Hauler
  8. Snowmobile Trailer
  9. Utility Trailer
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear

Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear

Item # APS3
Retail:$26.52
Our Price: $24.49
You Save: 8%
Trailer Leaf Spring Suspension
Shipping Weight: 7 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Kit includes 1-1/2" tall front hangers, 1-1/4" tall rear hangers, 3-1/8" shackle straps and hardware for mounting springs to your 2,000-lb to 7,000-lb, single-axle trailer frame. Components for mounting axle to springs sold separately. Great Prices for the best trailer leaf spring suspension from etrailer. Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear part number APS3 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (23)
  • Q & A (0)
  • Photos

etrailer Trailer Leaf Spring Suspension - APS3

  • Hangers
  • Suspension Kits
  • Boat Trailer
  • Camper
  • Car Hauler
  • Snowmobile Trailer
  • Utility Trailer
  • Double Eye Springs
  • Single Axle
  • etrailer

Kit includes 1-1/2" tall front hangers, 1-1/4" tall rear hangers, 3-1/8" shackle straps and hardware for mounting springs to your 2,000-lb to 7,000-lb, single-axle trailer frame. Components for mounting axle to springs sold separately.


Features:

  • Attaches 2 leaf springs (sold separately) to your trailer frame
    • Use table below to determine hanger location based on type of leaf springs
  • Achieves 4" or 4-1/2" clearance between trailer frame and axle, depending on axle size
  • Includes:
    • (2) 1-1/2" Tall front hangers
    • (2) 1-1/4" Tall rear hangers
    • (4) 3-1/8" Long shackle straps
    • (6) 3" Long x 9/16" diameter shackle bolts
    • (6) 9/16" Diameter locknuts
  • Designed for use on trailers with single, 2,000-lb to 7,000-lb axles
  • Does not include components for mounting axle to springs


Hanger Locations for Single Axle

Leaf SpringsA - Distance Between HangersB - Distance Between Center of Axle and Trailer FrameAxle Diameter
SP-169275 (1020)20"4-1/2"1-3/4"
(typical 2,000-lb trailer axle)
SP-219275 (PR722)
SP-220275 (PR3)
SP-218275 (PR4)
SP-212275 (PR4B)
SP-111275 (PR5)
SP-198275 (PR6)
24-7/8"4"2-3/8"
(typical 3,500-lb trailer axle)

Note: The above table provides an indication of where the included hangers can be mounted on your trailer. The distance between the hangers may vary depending on your specific application. Be sure to verify proper positioning before welding.



TSW-S3 Single Axle Hanger Kit - 1.75" Double Eye Springs - 2,000 lbs to 7,000 lbs

Replaces APS3





Customer Satisfaction Score:


Customer Reviews

Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear - APS3

Average Customer Rating:  5.0 out of 5 stars   (23 Customer Reviews)

Kit includes 1-1/2" tall front hangers, 1-1/4" tall rear hangers, 3-1/8" shackle straps and hardware for mounting springs to your 2,000-lb to 7,000-lb, single-axle trailer frame. Components for mounting axle to springs sold separately.

by:

They were very helpful upgrading my small trailer and extremely fast processing and shipping my order.I would definitely recommend etrailer
Thank you



by:

Appreciated the service and response time. everything fit well.



by:

I purchased a number of products from etrailer and I am very pleased with them all. The shipper lost my axle. When I contacted etrailer customer service, they handled my problem quickly and I had a replacement axle in a couple days. Well done!

The products were all of high quality and the assemble was much easier as a result. I have attached a few pictures of the build for those interested.

Thanks etrailer for your great products and service!!

Jim D.

1/2/2021

The trailer has performed better than my expectations. The products I purchased are all performing perfectly. When I build my next trailer, I will get all my assemble products from etrailer.com



by:

First I want to thank you for NOT sending out a review question 2 days after shipping the product !
Everything for my new springs came in a timely manner and were as advertised. I did have to call because the springs I ordered were too stiff. No problem I returned them and got the ones i should have ordered. Trailer rides much better than when it was new.



by:

I received the springs, and hardware very quickly. the quality was grate. I will be purchase all my trailer products from etrailer.



by:

They came on time and look plenty strong. I haven’t built the trailer yet but I’m sure they’ll do the job



by:

Fast shipping, worked great!



by:

exactly as advertised. Welded easily. working as desired



by:

Did not need for this project. Will save for later.



by:

Great item,have used this item before and worked great,also super fast shipping and great communication.



by:

love the product, love the service



by:

Product was as described, great price good quality and fast shipping.



by:

super fast great qualitty



by:

Just what I needed



by:

Received package timely and was as desc ribed



by:

good product and fast shipping



by:



by:



by:



by:



by:

Hayley and the gang are great



by:



by:


23
23

See what our Experts say about this etrailer Trailer Leaf Spring Suspension

  • Comparing Different Hanger Kits ffor Single Axle Trailer with Double Eye Leaf Spring
    Hi Barney! Any of the single axle kits you listed will work just fine for your single axle trailer. The main differences between the kits you listed is their height and how they install so I'll list out the differences below and you can decide from there which option is best for your trailer. - 1-1/2" Front, 7/8" Rear (4-1/4" or 4-1/2" clearance between trailer frame and axle) - Kit # APS1 - 1-1/2" Front, 1-1/4" Rear (4" or 4-1/2" clearance between trailer frame and axle) - Kit #...
    view full answer...
  • Single Axle Hanger Spacing Recommendation for a Leaf Spring # e54SR and Hanger Kit # APS3
    I attached the chart you referenced and it states that when you use a # e54SR spring with a hanger kit part # APS3 the hanger distance should be 24-7/8 inches. The length of a spring when new and not installed on a trailer will be slightly shorter than when it flattens out from the weight of the trailer. Once the weight of the trailer is on the spring it will flatten out and be the right length.
    view full answer...
    Image 1 for
  • Hanger Spacing Recommendation for 2,500 lb Leaf Springs on a Trailer
    When using the hanger kit part # APS3 with the leaf spring part # e66SR you will want to have a distance of 24-7/8 inches on center between the front and rear hanger.
    view full answer...
  • Determining Where To Install Hanger Kit APS3 with 26-1/2" Leaf Springs On Trailer
    There isn't a set dimension on where to install the hangers of the Single-Axle Trailer Hanger Kit # APS3 when you're using a 26-1/2" leaf spring, as it was really designed around a 25-1/2" leaf spring, so you'll need to tack weld the hangers in place until you get the correct shackle geometry but 25-3/4" spacing should be about right. This kit is only going to work with trailer leaf springs also, a vehicle leaf spring uses a completely different shackle bolt and will not fit in this hanger...
    view full answer...
  • Parts Needed to Add Suspension to Home Built Trailer with 3,500 Pound Axle
    On a single 3,500 pound axle trailer I recommend going with 25-1/8 inch springs part # e54SR. You want to choose springs rated for the same capacity as the axle. Then a popular hanger kit with these springs is part # APS3. All the hardware is included with the hanger kit. I've also linked an on trailer suspension as well as one that may help you determine where to place the axle on your trailer. In addition to the suspension parts I've linked our selection of fenders. Use your wheel...
    view full answer...
    Image 1 for
  • Can Trailer Suspension Hangers be Bolted On
    The top holes you see in trailer suspension hangers such as Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear Item # APS3 are for button welds and not bolts so these hangers should not be bolts on. The problem is that with a weld the hanger is fixed and cannot move. With bolts no matter how tight you make them the bolt will always be smaller than the holes in the hangers and given the forces applied could cause the hangers to shift and throw off the alignment...
    view full answer...
  • Comparing the Single-Axle Trailer Hanger Kits for Double-Eye Springs APS1, APS2, and APS3
    When choosing between the Single-Axle Trailer Hanger Kit for Double-Eye Springs part # APS1, part # APS2, and part # APS3 it will be best to use the one that has measurements that most closely resemble what is already on your trailer. For example, if your rear leaf spring hangers are 7/8" tall or shorter than you would want to use part # APS1 but if they are taller then this you would want to use part # APS2 or part # APS3. The only difference between the two latter kits is that part #...
    view full answer...
  • Leaf Spring Hanger Options for 8x8 Tilt-Bed Trailer
    For the springs, I'd recommend the # e84SR spring, which is designed for 2K axles and measures 20-3/8 inches from eye center to eye center. If you need a U-bolt kit for this axle, # APUBR-10 will work well. The hanger kit you use will depend on how much space you want between the axle and the trailer frame. Hanger kit # APS1 provides between 4-1/4 to 4-1/2 inches of clearance. # APS3 would give between 4 and 4-1/2 inches of clearance. # APS4 is 5 to 5-1/2 inches and # APS5 is between...
    view full answer...
  • Differences in the Redline Single-Axle Trailer Hanger Kits, # APS1, #APS2, and # APS3
    The APS1, APS2, and APS3 are all suspension kits for single-axle trailers with 1-3/4-inch double-eye springs. They are designed for use on trailers with single, 2,000-lb to 7,000-lb axles. The difference in the kits are in the rear hangers and the shackle straps. The Redline Single-Axle Trailer Hanger Kit, part # APS1, uses the Redline Rear Hanger, part # 30-20, which uses a steel bushing and is .91 inches tall. The shackle straps are the Shackle Strap, part # TRSL313, which are 3-1/8...
    view full answer...
  • Can Boat Trailer Replace Slipper Springs With Double Eye Springs?
    Yes, you can replace your slipper springs with double eye springs. The Double-Eye Spring # e27SR measure 26 inches from center of spring eye to center of spring eye and would work for you; these have a 2,250 lb capacity each though you will need to find springs that match your trailer's capacity as closely as possible. The other thing you would need is a hanger kit such as # APS3, which has 1-1/2" tall front hangers, 1-1/4" tall rear hangers, and 3-1/8" shackle straps. The correct hanger...
    view full answer...
  • How to Determine the Spacing Between Axles when Building a 4-Axle Trailer
    There are several things to consider when positioning axles on a trailer. I have included a picture that will help some but other factors include the springs and other suspension components you will be using. Also, a 4-axle trailer can potentially be a little troublesome because when turning the wheels can scrub (scrape the ground sideways). The closer the axles are together within reason the less likely this is to happen. But on 4 axles I do not think you will be able to avoid it completely. If...
    view full answer...
    Image 1 for
  • Replacement Hangers for Single Axle Trailer
    The only hanger kits we have that are bolt on are the # CE14035G40 and # CE14026G. Your typical double-eye leaf spring is going to be 1-3/4" wide so neither of these would work. This means the only option would be weld-on hangers. For replacement hangers you want to choose the same size you currently have. The width will always be 1-3/4" so you will need the height which is the distance from center of bolt hole to the top of the hanger. The same is true for shackles. The # APS3 has 1-1/2"...
    view full answer...
  • Spring Hanger and Axle Diameter Measurements for Installing Leaf Springs on Single Axle Trailer
    In the attached diagram the A measurement is actually the distance from the center of the spring hangers for a single axle trailer. The spring eye to spring eye measurement for your leaf springs will be slightly different. The B measurement that you see is simply the distance between the center of the axle and trailer frame. I have attached another diagram from the Single-Axle Trailer Hanger Kit for Double-Eye Springs # APS3 product page to help demonstrate this. If you have an axle with...
    view full answer...
    Image 1 for Image 2 for
  • Weight and Compatibility of 2,000 lbs Axle 5 on 4-1/2 Hub Combo and Components for a Custom Trailer
    I would be happy to help you. I'll start by giving you all the requested weights and then confirm compatibility. Dexter Trailer Axle with Idler Hubs item # 20545I-ST-72-15 weighs 40 lbs. This includes both idlers and the axle. Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel item # AM32424 weighs 46 lbs. This wheel has a 5 on 4-1/2 and is compatible with the above idler hubs. 6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long item # e27SR weigh 10 lbs...
    view full answer...
  • Where Do the Hangers Need To Be When Using the Trailer Hanger Kit APS3 with a 3,500 Lb Axle
    If you are using the Single-Axle Trailer Hanger Kit part # APS3 with the 3-Leaf Double-Eye Spring part # e59SR then you will need to install the leaf springs hangers 22-7/8" apart. In regards to spacing front to back, I have attached a help article for you that will help with this.
    view full answer...
  • How to Determine the Distance for Mounting Trailer Spring Hangers on a Single Axle Trailer
    Spring Hanger location dimensions are normally figured by the manufacturer and provided with the spring hanger kit, that includes all of the parts for installing the springs on the trailer frame. I have provided a chart that shows the spring hanger locations for single axle trailers for you to review, see link. There are two considerations for mounting the spring hangers. First, the distance between the spring hangers as you have asked about. Second, the location of the axle when installed...
    view full answer...
    Image 1 for Image 2 for
  • Hanger Spacing for Installing 26 inch Long Leaf Springs with Hanger Kit APS3
    If you were using the hanger kit part # APS3 with a set of 26 inch long leaf springs the correct hanger spacing you'd need is 25-3/4 inches to ensure you have the correct shackle angle.
    view full answer...
  • Replacing Slipper Springs with Double-Eye Springs
    If you are looking to replace your flat-end style slipper springs with a radius-type, you can use the same hangers you have only if they will accept the same size bolt as the radius-type springs. Otherwise you will need to get a new set of hangers and install them in place of the old ones. Also, you will want to replace the bolt as it is likely worn from the slipper spring. If you have a 2,000 lbs axle, you can use the 4-Leaf Slipper Spring with Radius End # SP-179275. This has an eye...
    view full answer...
    Image 1 for
  • Mounting Hardware Needed To Install 3,500LB Axle & Double Eye Leaf Springs on a Torsion Axle Trailer
    Here is a list of suspension kits we have that contain the hangers, shackle straps and mounting bolts for the leaf springs. Single-Axle Trailer Hanger Kit 1-1/2" Front, 1-1/4" Rear # APS2 Single-Axle Trailer Hanger Kit 3-1/4" Front, 7/8" Rear # APS5 Single-Axle Trailer Hanger Kit 1-1/2" Front, 7/8" Rear # APS1 Here are kits for just the spring hangers. Single-Axle Trailer Hanger Kit 1-1/2" Front, 1-1/4" Rear # APS3 Single-Axle Trailer Hanger Kit 3-1/4" Front, 1-1/4" Rear # APS4 We...
    view full answer...
  • Replacing Slipper Springs With Double-Eye Springs
    There are no U-bolts to attach the slipper part, I recommend replacing your slipper springs with double eye springs. In order to do this you need to know the weight rating of your axle as well as the length from center eye to center eye so you can properly place your hangers. For example, the 6-Leaf Double-Eye Spring # e27SR measures 26 inches from center of spring eye to center of spring eye and has a 4,500 lbs capacity; you will need to find springs that match your trailer's capacity...
    view full answer...
    Image 1 for

Do you have a question about this Trailer Leaf Spring Suspension?


Info for this part was:

Employee Lindsey S
Updated by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.