Replacement Hangers for Single Axle Trailer

Question:

Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2 Front, 1-1/4 Rear Item # APS3 Is there a hanger like this that doesnt require welding? Thx.

asked by: Todd F

Expert Reply:

The only hanger kits we have that are bolt on are the # CE14035G40 and # CE14026G. Your typical double-eye leaf spring is going to be 1-3/4" wide so neither of these would work. This means the only option would be weld-on hangers.

For replacement hangers you want to choose the same size you currently have. The width will always be 1-3/4" so you will need the height which is the distance from center of bolt hole to the top of the hanger. The same is true for shackles. The # APS3 has 1-1/2" tall hangers, 1-1/4" tall rear hangers, and 3-1/8" long shackle straps. If this matches what you currently have then this kit would be a good fit.

I have attached a helpful article on leaf spring suspension for your reference.

expert reply by: Robin H