CE Smith Front/Rear Hanger Bracket for Double-Eye Springs - Galvanized Steel - Bolt On
(3 reviews)
Price: $13.95
In Stock
CE Smith Front/Rear Hanger Bracket for Double-Eye Springs - Galvanized Steel - Bolt On
Item # CE14026G
Our Price: $13.95
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (3)
- Q & A (0)
- Photos
CE Smith Accessories and Parts - CE14026G
- Trailer Leaf Spring Suspension
- Brackets
- CE Smith
Heavy-duty hanger can be configured to work as either a front or rear hanger in your trailer's double-eye leaf spring suspension setup. Designed to bolt onto your trailer frame.
Features:
- Heavy-duty hanger bracket suspends a leaf spring from your trailer's frame
- Provides attachment point for front or rear of a double-eye spring
- Bolt-on installation - no welding required
- Attaches to the underside of your trailer frame
- Mounting hardware not included
- Flat top keeps bracket flush with trailer frame to limit wobbling
- Galvanized steel resists rust and corrosion
- Suitable for freshwater or saltwater use
- Quantity: 1 bracket
- Made in the USA
Specs:
- Dimensions: 5-3/8" long x 3" wide x 2" tall
- Inside width: 1-1/4"
- Shackle bolt hole diameter: 5/8"
- Frame attachment bolt hole diameter: 3/8"
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
14026G C. E. Smith Heavy-Duty Hanger Bracket for Double-Eye Leaf Spring Trailer Suspension - Galvanized Steel
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
Customer Reviews
CE Smith Front/Rear Hanger Bracket for Double-Eye Springs - Galvanized Steel - Bolt On - CE14026G
Average Customer Rating: 5.0 out of 5 stars (3 Customer Reviews)
Heavy-duty hanger can be configured to work as either a front or rear hanger in your trailer's double-eye leaf spring suspension setup. Designed to bolt onto your trailer frame.by: Steven 08/11/2023
Quality parts. Fast shipping
by: Curtis01/06/2022
by: Kyle 09/19/2021
3
3
See what our Experts say about this CE Smith Accessories and Parts
- Lowering Boat Trailer Converted to Flat Bed TrailerIf your trailer already has an over-under kit like # K71-385-00 to put the leaf springs above the axle, then you simply need to remove the kit to put the axle on top of the leaf springs using the factory mounted spring seat on the axle. This will lower the trailer by the diameter of the axle as well as the height of the leaf spring stack. If you need to further lower the trailer, then shorter spring hangers are needed. I recommend the CE Smith Front/Rear Hanger Bracket for Double-Eye...
view full answer... - What Size Bolt-On Leaf Spring Hangers Are AvailableWe only have 2 options for bolt-on hangers: - CE Smith Front/Rear Hanger Bracket for Double-Eye Springs # CE14026G which have an inside width of 1-1/4" - CE Smith Front/Center/Rear Hanger Bracket for Double-Eye Springs # CE14035G40 which have an inside width of 2" Typically with leaf springs that measure 1-3/4" you are using a bracket like the Front/Center/Rear Hanger for Double-Eye Springs # 115918 which has an inside width of 1-7/8" not 2". But this is a weld on option which won't...
view full answer... - Availability Of Suspension Hanger Bracket With Mounting Holes Near 3 On CenterThe CE Smith Front Hanger Bracket # CE14016G is the closest we have the Bracket # CE14026G. This hanger places the mounting holes at 3-3/8" on center.
view full answer...
- Bolt Hole Dimensions for CE Smith Front/Rear Hanger Bracket for Double-Eye SpringsThe bolt hole spacing for the CE Smith Front/Rear Hanger Bracket for Double-Eye Springs # CE14026G is 4-3/8" x 1-5/8". I've attached a dimensional photo for you to check out as well as a review video to reference.
view full answer...
- New Hangers for my TrailerI've got a solution for you. Unfortunately the CE Smith Front/Rear Hanger Bracket for Double-Eye Springs - part # CE14026G you looked at aren't going to work. I measured the mounting hole on it and they are on 1 9/16" centers which means half of each hole will be covered by your trailer frame. I then checked out CE Smith Front/Center/Rear Hanger part # CE14035G40 and those hoes are on 1 5/8" canters still no good for your application. After some brainstorming I came up with two options...
view full answer...
- Replacement Hangers for Single Axle TrailerThe only hanger kits we have that are bolt on are the # CE14035G40 and # CE14026G. Your typical double-eye leaf spring is going to be 1-3/4" wide so neither of these would work. This means the only option would be weld-on hangers. For replacement hangers you want to choose the same size you currently have. The width will always be 1-3/4" so you will need the height which is the distance from center of bolt hole to the top of the hanger. The same is true for shackles. The # APS3 has 1-1/2"...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Wilson B
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.