2" Square Trailer U-Bolt (Qty 2)
(206 reviews)
Price: $24.62
In Stock
2" Square Trailer U-Bolt (Qty 2)
Item # SP01-160
Retail:$28.08
Our Price: $24.62
You Save: 12%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (206)
- Q & A (0)
- Videos (1)
- Photos
Redline Trailer Suspension Parts - SP01-160
- U-Bolts
- Camper
- Car Hauler
- Utility Trailer
- Square Axle - 2 Inch
- 5-3/4 Inch Long
- 9/16 Inch Diameter
- 3500 lbs
- Redline
Square Trailer U-Bolts
Features:
- 2" Wide
- 9/16" Diameter
- 5-3/4" Long
- Length of threaded section: 2-1/2"
- Inner width: 2-1/8"
- Includes nuts
SP01-160 2" Square Trailer U-Bolt (Qty 2)
Video of 2" Square Trailer U-Bolt (Qty 2)
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Redline Trailer Suspension SP01-160 Review
Today we are reviewing SP01160. This is a set of two 2-inch square trailer U-bolts and they are used with U-bolt plates for 2-inch square axles. Those are sold separately as part number 117594 and that plate, along with these U-bolts will secure the trailer axle to the leaf springs and those are mounted to the trailer frame. So, what you have here are two 9/16th inch diameter bolts that are, here we go, 5-3/4 inches long. The threaded portion right here, as you can see, is 2-1/2 inches long and the diameter, inside-to-inside here, is 2 inches. These bolts do come with the nuts that you will need and that is it for Part Number SP01160 from Redline, 2-inchSquare Trailer U-Bolts.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
2" Square Trailer U-Bolt (Qty 2) - SP01-160
Average Customer Rating: 4.8 out of 5 stars (206 Customer Reviews)
Square Trailer U-Boltsby: Tenebs11/27/2023
Had a leaf spring break on my off-road trailer in Mexico. Left it at a boat yard until I received the parts from trailer & returned to replace. Only took 2 hrs to replace both leafsprinhs, shackles, bolts etc. And we were back on the road.
by: David P.11/14/2013
Worked great fit was good.
I did not use standard nuts furnished but used Nylon lock nuts instead.
by: Joe V. 06/11/2013
Great Experience!
When I noticed that the leaf springs on my 44 year old boat
trailer had cracked I thought I would never find replacements.
I fully expected to have to have something custom built.
I was amazed when I found the fantastic diagrams/descriptions
dimensions for replacement springs on etrailer.com
The phone support person was wonderfully helpful in confirming
if items were in stock and ready to ship. The replacement springs
arrived on time and everything bolted up perfectly!
Thanks for such a great site!
by: Frank 10/06/2023
These were bigger than the original ones that came on trailer am going to order another set for the other side
by: Erwin,07/26/2023
Springs & hanger kit worked well.
by: Jeff B10/08/2011
Fixed my jet ski trailer without welding. I used this to bolt down all four supports that had begun to crack at the welds. I was concerned that welding would cause the galvanized steel to rust so I found this solution. The heavy construction of this part is very strong and should do the trick. Installation was very easy and quick.
by: Edgar 02/03/2024
Perfect fit. Solid construction.
by: Ronnie 07/30/2022
Great product
Ronnie
8/31/2023
Works great I would highly recommend it
by: chuck finley11/05/2016
my friend ordered springs and hardware for my pontoon trailer. man did they get here fast. everything in one box. packed real good. no damage, nothing lost or left out. I finally got everything back together. fits great. i was worried that the springs where going to be to light, but the trailer sits just like new. sorry no pics. I was to greasy to get the camera out. But its like new again. yes etrailer.com i'm gonna be back next time I need parts. and i've already told all my friends with boats and trailers about etrailer.com . I am a happy customer. thanks again. C Finley
Chuck F.
11/15/2017
Thanks for your follow up. Parts are still doing fine. I am still veryhappy with my shopping exp. With etrailer, and I have had the opportunityto share my exp with several people hope they come shopping with you.
Chuck F.
11/15/2017
Thanks for your follow up. Parts are still doing fine. I am still very happy with my shopping exp. With etrailer, and I have had the opportunity to share my exp with several people hope they come shopping with you.
by: Ronald 08/21/2023
Back together no problem
by: John W.01/21/2016
These appear to be standard black steel and are of sufficient length to mount springs on top of axle or go with under slung arrangement. The nuts are crimped lock nut style which is ok.
John W.
1/21/2017
No problems after one year of hard usage and heavy loads.
by: Jean-Paul01/22/2023
Never been so impressed with the level of service or quality of product. Absolutely not only would buy from them again, I have multiple times. And will continue to do so for any future trailer parts!!!!
by: Jeff 07/26/2023
Ubolt are well made and heavy duty
by: Gerald 07/31/2023
Good quality, fit well.
by: Mark09/09/2022
I couldn’t find parts for my customers boat trailer . Nobody had a complete trailer axle . So I finally found etrailer they answered the phone I had all my measurements they took the time to search out what I was asking for . Awsome sales lady she knew what I wanted and found all my parts so I can replace the spindle on the axle
Nice to talk to a person instead of a answering machine
Thanks for your help
by: Rich M10/27/2016
Great product, as described, description of the measurements fit right on.
I would & have recommend E-trailer to friends.
Rich M.
10/27/2017
Fit and works as described, Im happy with the product.
by: William J.08/07/2015
The SP01-160 square u-bolts were perfect for my project. I had to have a certain size dia bolt and length, and these were just what I needed. I located some where I live, but they were very expensive. Found these at Etrailer and their price were half the price what they wanted here. I talked and ordered from Pat and she was very helpful on my order. The shipment was very fast also, ordered on Tuesday and received on Friday. I will definitely order from Etrailer again......Pat, thanks again
William J.
8/6/2016
Worked out perfect very sayisified
by: Ariel08/04/2022
had to replace rusted bunk brackets...these fit perfectly...the u bolts were a tad wider in width and bigger than the holes on the trailer so had to modify the holes to accomodate the u bolts...everything worked fine albeit took a little more time
by: Shelia06/05/2019
SP01-160 U Bolts look to be good quality just wish they came with lock washers.
TRTP200175 U Bolt spring plates work well with these U Bolts. I ordered 4 of these and got 1 and 3 #117594 plates which are very nice and look more heavy duty.
I thought I got stiffed with the one oddball one but I didn't I ordered the cheaper ones and got 3 of the heaver duty ones.
I also ordered #LC281285 Never Fail Tandem Axle Suspension Hardware Kit and one bolt in the kit is to long like its for a 2" wide spring. Guess I will just use one of the old ones I took out.
And 4 #SP-051275 4 leaf double eye leaf springs.
I am redoing the suspension on a fiber splicing trailer that was damaged during hurricane Michael.
All in All etrailer has great prices and fast shipping and great customer service.
by: Nick06/05/2017
Quality is excellent,I wish I had ordered lock nuts and washers as the u bolts just come with standard nuts.I will just use lock tight and check for loose nuts until they get rusty.If you need trailer parts I have ordered every thing from bearings and races to suspension bushings and spare tire covers from etrailer and have not been disappointed with any thing.
by: Austin M01/21/2016
Good thick U bolts, you can get away with about 1.5" of drop using a spacer block in between the spring and the axle. I was planning on 2" of drop but these U bolts are too short. That is my only complaint, and it is my own fault. I didnt know how thick the leaf springs were going to be so I thought these would be long enough, but not with 3500 lb 4 leaf springs.
by: Dave H.03/13/2019
Very heavy duty steel and worked for my application. Sadly they are not galvanized; hence the 4 star rating. I prepped, primed, and painted them well so they should hold up. Used to hang fenders on a boat trailer.
by: Jeremy B.09/03/2017
Great bolts for my 2" axle over 2" springs. Much heavier than the OEM bolts, not worried about them breaking anytime soon. Chose to cut them down by 1.25" to better fit the spring gap on my overslung axle to maximize spring travel length on my HF trailer, but that was a personal choice, not a requirement.
by: Tommy H.03/24/2014
Bought everything to completly rebuild my trailer. All products were good quaility and fit perfectly. The outstanding service was the best part. Never have done trailer work before and I called and talked to support. Got me everything I needed and it was all correct. Upgraded my shipping for free and I still recieved my order quicker than they told me I would.
by: Ed R09/17/2016
Erika was super helpful. Really helped me get the correct parts the first time. I will always use etrailer from now on!!
A+++ in my book!
Ed R.
9/17/2017
SUPERB!!!!!!!! Erika at E-Trailer is AWESOME!!!!
25
206
Show More Reviews
See what our Experts say about this Redline Trailer Suspension Parts
- Are The Threads on the 2" Square Trailer U-Bolt # SP01-160 Cut or Rolled and Can They Be Cut Deeper?The threads on the 2" Square Trailer U-Bolt # SP01-160 are rolled. We do not recommend attempting to cut the threads any deeper on the bolt. You can use a spacer to help make up for the difference if you are not able to find another U-Bolt with the deeper threads you are needing.
view full answer... - Switching from Slipper to Double Eye Leaf Springs on EZ Loader TrailerIn order to switch from slipper to double eye springs you'll need new hangers which are going to dictate your height so if you're looking to maintain the same height, you'd want to choose new hangers which are the same height as your existing. The Single-Axle Trailer Hanger Kit for Double-Eye Springs part # APS2 is a good option with 1-1/2" front and 1-1/4" rear. It can then be paired with the 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles part # e48SR. I also recommend replacing the...
view full answer... - Can Round U-Bolts Be Used On a Square Axle Tube? You need to use square U-Bolts with having a square axle tube. Trying to use round U-Bolts you risk damaging both the bolts and the axle as it creates pressure points rather than distributing the load across the surface. We have a few different size bolts you can see in the list below. 1-1/2" U-Bolts # SP01-120 1-3/4" U-Bolt # 175130 2" U-Bolts # SP01-160
view full answer... - Need a 3-Leaf Slipper Spring Kit for my Boat Trailer with 2 Inch Square AxlesIn order to determine which 3-leaf slipper springs will fit, you will need to take a few measurements of the current springs on your boat trailer. I am including a diagram that shows which measurements are needed. The diagram also includes the measurements of the two 3-leaf springs that we have available. Compare your measurements to those to see if we have a match. 3-Leaf Slipper Springs for 1,500 lb Trailer Axles, # SP-178275 3-Leaf Slipper Springs for 3,000 lb Trailer Axles, # SP-039275 Although...
view full answer...
- Recommended Torque Specifications for U-Bolt # SP01-160 in a Slipper Springs Trailer SetupSince the # SP01-160 u-bolts are 9/16 inches in diameter the torque rating is from 65 ft/lbs - 95 ft/lbs. I have linked a Help Article on Slipper Spring Trailer Suspension System Review to this page that lines out the torque ratings of the different diameter u-bolts for you to check out. I linked all the parts you mentioned to this page for your purchasing convenience.
view full answer... - U-Bolt and Plate Recommendation for Trailer with 2 inch AxleWe have axle u-bolts for 2 inch square axles like the # SP01-160 that you referenced but these are much longer at 5-3/4 inches long instead of what I believe I am understanding you say you want 2-1/2 inches in length. This comes with nuts for each side of the u-bolt but for plates you'd then want the # 117594.
view full answer... - Parts Needed For An Over-Under Suspension Conversion On A Boat Trailer Hey Travis, Since you have a square tube axle the Dexter over-under conversion kits aren't going to have the correct spring seats. We don't currently offer square tube spring seats so you'll need to source them somewhere else and then have a qualified welder weld the new spring seats on the bottom of the axle at the same spot as the originals. You'll want to measure the axle to make sure you're getting the correct size. From there you'll just want to replace the u-bolts because as they...
view full answer...
- U-Bolts to Attach Bunk Brackets to Trailer with 3 inch FrameFor a 3 inch trailer frame like you said you have we have the U-bolts part # 7163183UB which will work great for attaching roller bunk brackets like the part # CE10000G-4. The inside portion of the U-bolt is 3-1/8 inches wide by 3 inches long.
view full answer... - Replacement Leaf Springs, Equalizers, and Shackle Straps for a Magic Loader Boat Trailer 6K AxlesThere is not an exact size leaf spring, equalizer, and shackle strap length that must be used on your trailer but they do all have to be compatible with each other. That said, the measurements that you provided are fairly standard so I recommend using the Tandem-Axle Trailer Hanger Kit part # APT5 with the 5-Leaf Double-Eye Spring part # e34SR (4). The leaf spring hangers can be discarded but it will be more cost effective to obtain the kit. These components will have the right combination...
view full answer... - Leaf Spring and U-Bolts Recommendation for a Utility Trailer with 2 inch Square AxlesSounds like you have 2 inch square axles on your trailer, for a set of U-bolt you would want part # SP01-160 and then for a U-bolt plate you would want the part # 117594. Now to pick out the correct springs you will want to first find out how much capacity your trailer and axles are rated for. This should be stamped on a plate near the coupler where the VIN is located. If it was a round axle I could give you a pretty good ball park of what the capacity would be, but square axles don't...
view full answer... - U-bolts for Gooseneck Trailer hitch Safety ChainsU-bolts for gooseneck hitches have springs on them so that the retract down when not in use. U-bolt kit # C113 sounds like it would work for you with the measurements you have provided. The u-bolts are 2 inches wide on center and the springs, washers, and nuts are included.
view full answer... - Replacement U-Bolts For A 3,500lb Axle On A 2020 Grand Design Imagine 22MLE XLSSince your axles are round it's actually best to measure with a set of calipers # PTW80157 instead of a tape measure, as you have to kind of eyeball and guess what the actual measurement is. Based on the picture you provided I can see you're under 3" so you would have a 2-3/8" axle unless you had some homemade axle, but I'm assuming with the age of the trailer that you're the original owner from the factory so that wouldn't be the case. For 2-3/8" axles you'll need the CE Smith U-Bolt...
view full answer...
- Are 5-3/4 Inch U-Bolts Long Enough for a 3 Inch Tall Axle and Slipper Spring # SP-040275The internal length of u-bolts # SP01-160 is 5-3/4 inches so you would not subtract 9/16 inches from that length. The u-bolt plate # 117594-G is 3/16 inches thick. The spring stack for # SP-040275 I just measured and it is 1-7/16 inches thick. Adding in the 3 inch height of the axle and the total comes to 4-5/8 inches. So all of these parts will fit your trailer axle.
view full answer... - What is the Internal Width of Square Trailer U-Bolts # SP01-160I went out to the warehouse and measured the internal width of Square Trailer U-Bolts # SP01-160. They are 2-1/8 inches wide on the inside. They are designed for a 2 inch square axle using 1-3/4 inch to 2 inch wide springs.
view full answer... - Replacement Trailer Suspension Parts for Trailer with 2 Square AxleIt looks like you've got a pretty good grasp on all of this and thank you for the detailed information; it looks like most of the parts you've mentioned will work for you. For the leaf springs, the 26" long # e27SR will be the best option for you since springs stretch out over time and they're right around the capacity of what the axles likely is. The next closest size would be the 25-1/8" # e54SR, but I would be hard pressed to believe that your old ones have stretched out over a full...
view full answer...
- Replacement U-Bolt Plate for a Trailer with 2 Inch Square AxleFor a 2 inch square axle you are going to want u-bolt plate # TRTP200175. The hole spacing on center is 2-5/8 inches by 2-3/8 inches. For matching u-bolts go with # SP01-160. They have a 9/16 inch diameter. I have included a link to a video review for you for the u-bolts. It does sound like you will need to replace some existing components if they do not match up. I do not recommend modifying anything because that can weaken those items. Any welding should be performed by a qualified professiona...
view full answer... - How to Increase Ground Clearance with Slipper Springs. I can help you figure out how to get more ground clearance from your trailer. All of our over under kits have only been tested on a double-eye spring setup, these are secured on both ends unlike slipper springs which are not. I would worry that it could become unsafe since the weight of the trailer was pulling on the axle and once you switch the location of it all the weight will now be pushing down on the rectangular axle. While we don't have a specific over under kit for rectangular...
view full answer... - Does the Replacement U-Bolt for 2 Wide, Square Axles Come With NutsThe Replacement U-Bolt for 2" Wide, Square Axles part # UBZC716X212X400 does not come with nuts. The bolts are 7/16"-14 so you can pick up nuts for them at any local hardware store. We do however offer a similar u-bolt in a kit which does come with nuts, the 2" Square Trailer U-Bolt Kit part # SP01-160. These u-bolts are slightly longer.
view full answer... - How To Choose The Correct Leaf Spring U-Bolt Diameter Size On A Trailer AxleYou will want to choose the diameter size of U-Bolts you need by the axle type (round, square) and the axle diameter. The Redline 2 Inch Square Trailer U-Bolt, part # SP01-160, you have referenced is for a 2 inch square axle. It is a 9/16 inch diameter bolt. The 9/16 inch diameter U-Bolts are used on 1-3/4 inch and 2 inch square axles, 2-1/2 inch round axles, 3 inch round axles, and 3-1/2 inch round axles. I am including a link to a page of the available 9/16 inch diameter U-Bolts. The...
view full answer... - How to Pick Out Replacement Slipper Springs for a Boat Trailer with 2 inch Square AxlesIn order to pick out springs you need to remove the load on the trailer so that the leaf spring is not flattened out at all. You will want to measure from the center of the eye of the spring to the center of where the slipper spring contacts the hanger. If that distance is 26-1/4 inches and the capacity of the axle is 4,100 lbs the # e33SR would fit and work well. The bushing of this spring is 9/16 inch in diameter. You will want to use a 9/16 inch diameter bolt so you can either premeasure...
view full answer... - Leaf Springs, Hanger Kit, and U-Bolts for a 2 Inch Square Trailer AxleSince you do not know the capacity of the trailer axle then you can't go by the capacity of the springs. If the axle is rated for 2,000 pounds and the springs for a 3,500 pound axle then you would still be limited to 2,000 pounds. If you have the inner and outer bearing numbers then that will help to determine what the likely axle capacity is. Since you want to replace the hangers as well as the springs then it doesn't matter which springs you choose. If the axle does end up having a...
view full answer...
- Correct Replacement for 26-1/2 Long Leaf SpringIt's not uncommon for new trailer leaf springs to measure shorter than the old leaf springs they are replacing. The reason for this is that leaf springs stretch as they age. Therefore, I do think the 26" long leaf spring options we offer will work for you. In order to find the right one you just need to find your axle capacity; part # e77SR for 2,000 lb, part # e22YR for 4,000 lb, or part # e94SR for 6,000 lb. For new u-bolts, we have the 2" Square Trailer U-Bolt part # SP01-160.
view full answer... - Replacement U-Bolt and Plate for Trailer with 2 Inch Square AxleFor a 2 inch square axle you are going to want u-bolt plate # TRTP200175. The hole spacing on center is 2-5/8 inches by 2-3/8 inches. For matching u-bolts go with # SP01-160. They have a 9/16 inch diameter. I have included a link to a video review for you for the u-bolts.
view full answer... - U Bolts for a 3,500 lbs Square AxleI have a solution for you but we do not have a 2" square u bolt kit for a 3,500 lbs square axle that is 5 3/4" long. You will need to buy the u bolts and u bolt plates separately. The Square Trailer U-Bolt item # SP01-160 comes in a 2 pack, is 2" wide, 9/16" diameter, 5-3/4" long, and has a 2 1/2" length of threads. The U-Bolt Plate for 2" Square Axle item # 117594 comes single and works with 9/16" u bolts.
view full answer...
Do you have a question about this Trailer Suspension Part?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Joshua S
Updated by:
Adele M
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
David P.
11/14/2014
No problems....still like it and still going strong on my boat trailer!