Switching from Slipper to Double Eye Leaf Springs on EZ Loader Trailer
Question:
I would like to convert my ezloader trailer from. Slipper C hook springs that measure 1 3/4 wide and 26.25 eye to center of C hook with 4 leafs to a double eye spring. The axle is a 2 inch square. Do you have a kit to give me the same ride height? The best I can tell is the current springs are this model, EZ-LOADER 26.25inch C-Hook Leaf Spring 4-leaves / 1,975 lb. #250-031411 model # EZL96B 17-20 2800 3100 .
asked by: Jeremy
Expert Reply:
In order to switch from slipper to double eye springs you'll need new hangers which are going to dictate your height so if you're looking to maintain the same height, you'd want to choose new hangers which are the same height as your existing. The Single-Axle Trailer Hanger Kit for Double-Eye Springs part # APS2 is a good option with 1-1/2" front and 1-1/4" rear. It can then be paired with the 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles part # e48SR. I also recommend replacing the u-bolts using the 2" Square Trailer U-Bolt part # SP01-160.
If you need different hangers, you can take a look at the full list below.
Products Referenced in This Question
etrailer Rust-Resistant 4-Leaf Double Eye Spring for 4K Trailer Axles - 26" Long - Dacromet
- Trailer Leaf Springs
- Double Eye Springs
- 4000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 26 Inch Long
- Dacromet
- etrailer
more information >
2" Square Trailer U-Bolt (Qty 2)
- Trailer Leaf Spring Suspension
- U-Bolts
- Camper
- Car Hauler
- Utility Trailer
- 3500 lbs
- Square Axle - 2 Inch
- 9/16 Inch Diameter
- 5-3/4 Inch Long
- Redline
more information >
Product Page this Question was Asked From
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear
- Trailer Leaf Spring Suspension
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: dacromet
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
- Q&A: Parts Needed to Swap a Trailer With Surge Brakes to Electric Brakes
- Shop: Westlake ST205/75R14 Radial Tire w 14" Condor Aluminum Wheel - 5 on 4-1/2 - LR D - Gunmetal
- Shop: Clamp On Mounting Bracket for Hydrastar Electric Over Hydraulic Actuators
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Timbren Suspension Enhancement System - Coil Spring Suspension - Rear Axle
- Shop: Westlake ST205/75R14 Radial Tire w 14" Liger Aluminum Wheel - 5 on 4-1/2 - LR D - Black
- Shop: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: Where to Position the Trailer Axle?
- Article: What Is A Leaf Spring? (Everything You Need to Know About Trailer Leaf Suspension)
- Article: How to Accurately Measure Trailer Leaf Springs
- Search Results: convert surge brakes electric over hydraulic
- Search Results: shorelander
- Search Results: tandem axle trailers
- Video: Hydrastar Brake Actuator HS304-7169 Review
- Search Results: hydrastar electric~hydraulic brake actuator
- Q&A: Leaf Spring for 5,000 lb Trailer Axle
- Video: etrailer Trailer Idler Hub Assembly Installation
- Search Results: torsion axel for trailer
- Search Results: electric over hydraulic trailer brakes
- Shop: Brake Controller
- Q&A: Converting Trailer from Surge Brakes to Electric Brakes
- Video: Demco Straight Tongue Trailer Coupler - Standard Coupler - DM12717 Review
- Video: Demco Straight Tongue Trailer Coupler - Standard Coupler - 12564 Review
- Shop: Suspension Enhancement
- Q&A: How To Convert Trailer With Slipper Springs To Double Eye Springs
- Q&A: Which Way Do Slipper Springs Face on a Trailer
- Q&A: 2,000 lb Axle Leaf Spring Recommendation for Trailer that has 26-1/4 inch Long Springs