Can 20440I-EZ-60 2,000 lb Axle be Used w/ 49 Inch Spring Center Measurements on Single Axle Trailer
Question:
Im in the process of planning the replacement of the axel and leaf springs on my Haulin Trailer Model 4700. Im looking at replacing my Dexter P-21 SLR axel with your #204401 EZ60 axel kit, but Im concerned about the leaf springs. My existing frame has welded spring brackets with spring center to spring center measurement of 49inch and spring eye to spring eye measurement of 20. Your #204401 EZ60 has welded spring mounts @48inch and Im not finding a leaf sprint that will fit my frame brackets. What would you recommend?
asked by: Frank M
Expert Reply:
What you would need to do is have your current hangers removed and new ones welded on in order to use the Dexter Trailer Idler Axle w/ Idler Hubs - EZ-Lube - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs # 20440I-EZ-60.
The # 20440I-EZ-60 wouldn't work with the spring eye measurements you currently have so this would really be the only option. I have added a link below to our entire selection of single-axle hanger kits for you to check out, each with different heights.
Products Referenced in This Question
Dexter Trailer Idler Axle w/ Idler Hubs - EZ-Lube - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 4 on 4 Inch
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- Dexter
more information >
Product Page this Question was Asked From
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Q&A: Hub Fit For 2,000 lb Dexter EZ-Lube Axle & Trailer Tire & 12 Wheel With 5 on 4-1/2 Bolt Pattern
- Search Results: leaf spring hangers
- Video: Review of etrailer 3 Leaf Double Eye Spring - e84SR
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30670 Review
- Search Results: kenda kr25 st145r12
- Search Results: axels
- Search Results: trailer axels
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 5 on 4-1/2 - Load Range B
- Shop: Dexter Idler Trailer Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: Dexter Trailer Idler Axle w/ Idler Hubs - EZ-Lube - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Search Results: leaf spring
- Shop: Trailer Hitch
- Search Results: 25580
- Article: Trailer Tire Sizing
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Video: etrailer Class III Trailer Hitch Installation - 2024 Subaru Forester
- Search Results: hitch
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Article: Most Popular Wheel Bearings
- Shop: Brake Controller
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
on Trailer Suspension Parts
