Will Fulton FXP15 Fit 2" x 4" Frame On 2008 E Z Trailer?

Question

Question:

Will the Fulton FXP15 trailer jack mount on my 2inch x 4inch 2008 E Z Trailer frame? Thank you.

asked by: Jim N

0

Expert Reply:

Yes.

While the Fulton # FXP15 was designed for a 3" x 3" or 3" x 4" frame, the included hardware has enough threads to allow you to secure it to the 2" x 4" frame on your 2008 E Z trailer.

expert reply by: Samuel C

0

Answer 1

The Fulton #FXP15 will indeed be compatible with a 3 x 2 inch trailer frame member. I've confirmed this with my Fulton representative.

view full answer...

Answer 2

The Fulton Bolt-Thru Swivel Marine Jack #FXP15 does feature a caster wheel that rotates to make it easier to move your boat trailer around. You can see this in the linked video at the 4-minute mark. The entire jack also swivels on its mount to…

view full answer...

Answer 3

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 6

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 7

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to…

view full answer...

Answer 9

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need…

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex…

view full answer...

Will Fulton FXP15 Fit 2" x 4" Frame On 2008 E Z Trailer?

Product Page this Question was Asked From

Continue Researching