Is the Mounting Bracket Included with the Fulton Bolt-Thru Swivel Marine Jack Part # FXP10W0301

Question:

So I plan to buy the weld on from you. its $ but shipping ($) brings by up to $. At that point I would certainly just buy this (FXP15W) for $, and not have to do any grinding or welding. Im not even sure if I would buy with free shipping to save the $ and have to grind/weld. But I may. Can you offer free shipping on this?

asked by: Anthony

Expert Reply:

The Fulton Bolt-Thru Swivel Marine Jack part # FXP10W0301 does not come with the bolt-thru swivel bracket you will need to attach it to the trailer. For this, you can use the part # P9012-00. The plate that you are referring to will attach to the above bracket. As you mentioned, you will need to cut/grind the old bracket off and weld the new one on in order to use this jack.

I have attached a review video of the jack for you as well.

expert reply by: Conner L

Anthony

5/3/2018

Conner L.

5/3/2018

The Fulton Bolt-Thru Swivel Marine Jack part # FXP15W (1,200 lbs) that you referenced is the same jack as the Fulton Bolt-Thru Swivel Marine Jack part # FXP10W0301 (1,500 lbs) for the exception of the weight capacity. You would still need to use part # P9012-00 to attach either jack to your trailer. If you do not want to cut and reweld a new bracket onto the trailer then you an use a bolt-on style jack like the Fulton Bolt-Thru Swivel Marine Jack part # FXP10 for 1,200 lb capacity or part # FXP15 for 1,500 lb capacity. These jacks will bolt onto 3" x 3", 3" x 4", or 3" x 5" trailer frames. Unfortunately, we can only offer free shipping on orders that exceed $99. I have attached a review video on one of the bolt-on jacks for you below.