Kodiak 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
(75 reviews)
Price: $95.50
In Stock
Kodiak 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
Item # KR10D
Retail:$128.24
Our Price: $95.50
You Save: 26%
In Stock
- All Info
- Reviews (75)
- Q & A (0)
- Photos
Kodiak Accessories and Parts - KR10D
- Trailer Brakes
- Disc Brakes
- Rotors
- Kodiak
- 3500 lbs
Corrosion-resistant, slip-on rotor fits over your idler axle and is held on by the wheel and wheel bolts. Cast iron construction and vented design combine to form a long-lasting, superior-functioning rotor.
Features:
- Slip-on, over-the-hub rotor makes it easy to convert idler axle to disc brake axle
- Fits over standard idler hub and is held in place by wheel and wheel bolts
- No need to replace entire hub-and-rotor assembly if only hub or rotor becomes damaged
- Distance from hub face to hub face will increase by approximately 1/2"
- Vented design effectively dissipates heat, preventing heat-related damage
- Cast iron construction ensures a favorable friction coefficient for necessary stopping power
- Dacromet plating provides superior corrosion resistance for freshwater or saltwater use
- 300- to 400-Hour salt-spray rating
Specs:
- Fits:
- Axle capacity: 3,500 lbs
- Wheel size: 14" and larger
- Bolt pattern: 5 on 4-1/2"
- Overall rotor diameter: 10-7/8"
- Inner diameter: 6-15/22"
- Bolt hole diameter: 17/32"
- 3-Year warranty
RTR-10-D Kodiak Disc Brake Rotor Only - Dacromet Finish - 3,500 lbs
Replaces Kodiak KR10E (ROTOR-10-E), KR10SC (ROTOR-10-SCAD) and ROTOR-10-DAC
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Kodiak 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - KR10D
Average Customer Rating: 4.9 out of 5 stars (75 Customer Reviews)
Corrosion-resistant, slip-on rotor fits over your idler axle and is held on by the wheel and wheel bolts. Cast iron construction and vented design combine to form a long-lasting, superior-functioning rotor.by: Matt W08/28/2022
These rotors replaced an identical set from the OEM on a WESCO dual axle trailer. Unfortunately, my brake pads disintegrated and scored the rotors after two years of salt water use, but these rotors seem like great quality and were very easy to replace. I used anti-seize for this job. Highly recommended, especially if you dip them in salt water at all.
by: Richard P09/22/2019
you had all the parts to completely rebuild my trailer brakes to new condition. As it is a salt water trailer, they are holding up very well. Thanks for being here and your good service
by: Michael07/25/2023
Solid performance.
by: Andrew 10/05/2022
Parts were as ordered and arrived on time. I will be getting all trailer parts in the future with you.
by: Mike S02/24/2015
great products, great service, fast delivery.
I was not sure where to look for these types of parts, but e-trailer has been a super provider of items for the truck, so i looked at them for these parts. they had a good selection, the website helped give confidence in ordering the right part and prices are very fair.
by: Keith 07/07/2022
Excellent turnaround I purchased a rotor for my boat trailer , it was just what I needed and was represented precisely
by: Scott 03/10/2020
Rotor, bolts, brake pads, and lug nuts all arrived as promised and fit as advertised. Reasonable price with good service means I'll be back.
by: Rogn06/03/2018
On time, reasonable quality. Like any thing used i marine environment they have alimited lifespan. Dacromet helps but is far from answer.
by: Patrick09/14/2018
Fit perfectly. I love etrailer. Fast shipping, accurate orders.
by: John 11/10/2021
Good price, quick ship !
by: Terry F.07/12/2015
Great price. Rapid shipment.
by: Ken 01/16/2021
Easy to find on the website exact match. Delivered very fast.
by: Mark11/18/2017
Rotors arrived on time and customer service was great.
by: Brian A03/13/2014
Nice product. Very clean and exact fit.
by: Devon 09/19/2022
by: Mark 08/16/2022
by: Dave 10/03/2022
by: Mark03/02/2024
by: Cecil 12/01/2022
by: Timothy 05/06/2023
by: David 12/07/2023
by: Patrick 02/14/2023
by: Marshalldavis10/06/2022
by: Michael 02/07/2023
by: David 08/22/2022
25
75
Show More Reviews
See what our Experts say about this Kodiak Accessories and Parts
- Replacement Parts Available for Kodiak Disc Brake Kit K2R35DYes, replacement parts are available for Kodiak disc brake kit # K2R35D. For calipers you can use # KDBC225DAC for dacromet or # KDBC225S for stainless steel. Both come in quantities of 1 and are for 3,500 to 6,000 pound axle Kodiak disc brake kits. For brake pads you can use # K225CP for Kodiak disc brake kits for 3,500 to 6,000 pound axles. There is also a rebuild kit, # KDBC225KIT. For a rotor (this kit has rotors that fit over idler hubs) you can use # KR10D for dacromet or # KR10S...
view full answer... - Recommended Hub and Slip On Rotor for a 2017 Dual Axle Boat TrailerFor replacement hubs with a 5 on 4 1/2" bolt pattern you can use the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles # AKIHUB-545-35-G-EZ-K. This kit includes the bearings, races, seal, grease cap, and lug nuts, has an easy grease cap for seamless lubrication, and will work with 13" to 15" wheels. For slip on rotors, the Kodiak 10" Rotor # KR10D will work great, has a 5 on 4 1/2" bolt pattern, and will fit over any standard idler hub.
view full answer... - What Are The Thicknesses Of The Kodiak 10 Inch Brake Rotor?I spoke with Kodiak and they were able to tell me that the Kodiak 10" Rotor # KR10D has a .930" or 22.62mm thick braking surface, and has an overall thickness of 2.337" or 59.4mm. Attached is a product overview video, as well as a diagram depicting these measurements.
view full answer...
- Is Kodiak Rotor part # KR10S Sold IndividuallyThe part # KR10S is for a single stainless steel rotor. If you needed a pair you would have to order a quantity of 2. The same applies to the part # KR10D except this is a Dacromet coated rotor. Dacromet is corrosion resistant, but no steel is more corrosion resistant than stainless steel.
view full answer... - Is KR10D a Single Rotor or a Set of TwoThe Kodiak 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs # KR10D is sold in a quantity of one, so it is a single rotor. To get two you would just enter "2" in the "Quantity" box on the product page of the # KR10D.
view full answer... - Availability of Kodiak Slip On Rotors for Idler Trailer HubsSounds like you are looking for the # KR10D. This is a 10 inch diameter Kodiak rotor designed to fit over idler hubs with a 5 on 4-1/2 inch bolt pattern. We actually have quite a few different slip on rotors from Kodiak. If you check out the attached link you can see them all listed.
view full answer... - Recommended Replacement For A Tie-Down Engineering Disc Brake HubI will start by saying that your TDE 11033L hub uses the # L68149 inner bearing and # L44649 outer bearing, which means you have a pretty standard #84 spindle on a 3,500 pound axle. With that said, we do not carry Tie Down Engendering products, so the actual hub will cause some difficulties. Especially being oil bath as hubs for this size axle were only ever really done by TDE. Just as an example, if you look at the Kodiak Trailer Hub # Q-HUB84545 that will fit the Kodiak 10" Rotor # KR10D,...
view full answer...
- Which Rotors Do I Need For My Kodiak 225 SS CalipersWe do have a few options for your Kodiak 225 calipers # KDBC225S, we offer the Kodiak 10" Rotor # KR10D which have a 5 on 4 1/2 bolt pattern, will fit 14" or larger wheels, and will work on 3,500 pound axles. Finally we also offer the Kodiak 12" Rotor # KR12D which have a 6 on 5 1/2 bolt pattern, will fit on wheels 15" or larger, and will work on 5,200 to 6,000 pound axles.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.