Availability of Kodiak Slip On Rotors for Idler Trailer Hubs

Question

Question:

Looking for Kodiak slip over disc brake rotors. You have the Kodiak idler hubs , ust need the rotors to complete the job. part is :KODIAK 10inch Vented Slip Onfoot Style Rotor, Dacromet #ROTOR10DAC

asked by: Tom

0

Expert Reply:

Sounds like you are looking for the # KR10D. This is a 10 inch diameter Kodiak rotor designed to fit over idler hubs with a 5 on 4-1/2 inch bolt pattern.

We actually have quite a few different slip on rotors from Kodiak. If you check out the attached link you can see them all listed.

expert reply by: Jameson C

0

Answer 1

We do have a few options for your Kodiak 225 calipers #KDBC225S, we offer the Kodiak 10" Rotor #KR10D which have a 5 on 4 1/2 bolt pattern, will fit 14" or larger wheels, and will work on 3,500 pound axles. Finally we also offer the Kodiak…

view full answer...

Answer 2

The Kodiak Disc Brake Kit part #K2R35D that you referenced does include a rotor that is 10 inches in overall diameter and is designed for the bolt pattern 5 on 4-1/2 inch that you mentioned as well. Sounds like this kit is exactly what you would…

view full answer...

Answer 3

Appreciate the photos, they were great, and you are 100 percent right that the correct disc brake kit for you is the 3,500 lb kit from Kodiak: - Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet #K2R35D The #K2R35D have the right size…

view full answer...

Answer 4

I will start by saying that your TDE 11033L hub uses the #L68149 inner bearing and #L44649 outer bearing, which means you have a pretty standard #84 spindle on a 3,500 pound axle. With that said, we do not carry Tie Down Engendering products, so the…

view full answer...

Answer 5

Thanks for the pictures! You're correct, the Replacement Mounting Bracket for Kodiak Disc Brake Caliper #KCMB10RD is the correct replacement mounting brackets for your Kodiak 225 brake calipers. Attached is a product overview video for you to…

view full answer...

Answer 6

The diameter of the center hole on the rotor included with the #K2R35D is exactly 3" and fits a 5 on 4-1/2 bolt pattern. This is designed to fit over standard idler hubs on a 3,500 lb axle.

view full answer...

Answer 7

I spoke with my contact at Kodiak. He stated that the UA code at the end of your existing caliper mounting bracket means that it is for a slip over (over the hub) or stainless steel rotor. We have 2 that fit this category, each with a different…

view full answer...

Answer 8

Parts #K2HR35D and #K2R35D accomplish the same thing and have the same ratings but they fit differently applications. If you take a look at the pictures I've attached, part #K2HR35D is a complete kit with hubs and rotors where part #K2R35D does…

view full answer...

Answer 9

The Kodiak Disc Brake Kit part #K2R35D comes with rotors which measure 10-7/8" diameter but are commonly just referred to as 10" diameter rotors.

view full answer...

Answer 10

The slip-on rotor included with the Kodiak #K2R35D disc brake kit have an inside diameter of 6.681 inches and an outside diameter of 10.875 inches, as shown in the provided photo. The rotors are compatible with hubs that have a 5 on 4-1/2 inch bolt…

view full answer...

Answer 11

Though you can definitely go with the all flexible line kits, like the Kodiak Hydraulic Brake Line Kit #15SI-BLKIT, I do prefer the more traditional steel kits, like the HydraStar Hydraulic Brake Line Kit #HS496-251. I have found the steel line to be…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Availability of Kodiak Slip On Rotors for Idler Trailer Hubs

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching