Kodiak Hydraulic Brake Line Kit - Single Axle - 15'
(36 reviews)
Price: $105.29
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
24% prefer this
9% prefer this
- All Info
- Reviews (36)
- Q & A (0)
- Photos
Kodiak Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- Brake Lines
- Brake Line Kits
- Kodiak
- 15 Feet Long
- Single Axle
- Flexible Brake Hose
Brake line kit lets you run brake fluid from your surge brake actuator to your trailer brakes. Great for disc brakes and torsion axles. Includes 15', 7', and 1-1/2' flexible hoses with swivel fittings; a tee fitting; and hardware.
Features:
- Brake hoses and fittings let you run brake fluid from your surge brake actuator to your trailer brakes
- Designed for use on single-axle trailers with drum or disc brakes
- Flexible design makes hoses perfect for use with foldaway trailer tongues, disc brakes, and torsion axles
- Rubber hoses meet DOT and SAE standards and are easier to install than rigid steel lines
- Brass, male, swivel flare nut fittings on ends of each hose have deep threads
- Deep threads improve connection to help prevent leaks
- Swivels allow flare fittings to turn without the hose twisting
- Open area on flare fittings lets you use a line wrench for better grip
- Minimizes the risk of stripping threads
- Fittings are double-crimped onto hoses
- Corrosion-resistant, brass tee fitting connects 3 hydraulic lines
- Female inverted flares (FIF) at each port
- Heavy-duty loom clamps secure hoses to your trailer's frame
- Kit includes:
- (1) 15' Long flexible brake line
- (1) 7' Long flexible brake line
- (1) 1-1/2' Long flexible brake line
- 1 Tee fitting
- (14) 1/2" Loom clamps
Specs:
- Hose inner diameter: 1/8"
- Fitting size: 3/16"
- Thread size: 3/8"-24
- 3-Year limited warranty on hoses and fittings
Hydraulic Brake Line Installation for Single-Axle Trailers
- (A) 15' Long flexible brake line (BH-3MFS-15)
- (B) 7' Long flexible brake line (BH-3MFS-7)
- (C) 1-1/2' Long flexible brake line (BH-3MFS-1-5)
- (D) Tee fitting (BH-T-3FIF)
- (E) Loom clamps (A0500)
Flexible Rubber Brake Hoses
Kodiak brake hoses are made of rubber, making them a practical choice for a variety of applications. Because you can easily bend them, rubber hoses are simpler to work with than rigid stainless steel brake lines. This flexibility makes rubber hoses great for use with foldaway trailer tongues because they are less likely to kink or break when bent. In addition, rubber hoses allow for a wide range of motion so articulating parts can effectively function. These qualities make rubber hoses better suited than steel lines for trailers with torsion axle suspension systems and trailers that have disc brakes.
Stainless steel brake lines have braided exteriors, which can not only wear against exterior surfaces, but also against the interior lining of the hose if dirt gets underneath the steel braid. And if the braid on a stainless steel line tears, it can cut into the hose lining. The exterior surface of these hoses is solid rubber, so there are no crevices for debris to enter.
Durable Fittings with Deep Threads
Kodiak brake hoses have corrosion-resistant brass fittings with stainless steel flares. These fittings have a gap built into them that allows room for a line wrench - also called a flare nut wrench - to slide over the line and down to the nut. This type of wrench grips the nut better than a standard open-ended wrench so there is less chance of stripping the threads as you tighten down the nut.
The stainless steel that is used to create the flares on these hoses is stronger than brass. As a result, these fittings are more durable than ones made entirely of brass. The stainless flares are primarily designed to keep the fittings from splitting when you tighten them down, but they offer absolute rust protection as well.
Kodiak's fittings have deeper threads than many other fittings on the market to provide a higher thread engagement. Deeper threads offer an advantage when used with fittings that have the same thread depth. These Kodiak fittings will work with most fittings on the market, but when they're used with other Kodiak fittings, the result is a stronger connection with fewer leaks.
BH-3MFS-15 Kodiak 1/8" ID Rubber Brake Hose - 3/16" MFFN with Male Swivels - 180"
BH-3MFS-7 Kodiak 1/8" ID Rubber Brake Hose - 3/16" MFFN with Male Swivels - 84"
BH-3MFS-1-5 Kodiak 1/8" ID Rubber Brake Hose - 3/16" MFFN with Dead Swivels - 18"
BH-T-3FIF Kodiak Forged Brass T-Fitting for 1/8" Diameter Brake Hose - 3/16" Female Inverted Flare
A0500 Metal Loom Clamp - 1/2"
Item # 15SI-BLKIT
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Kodiak Hydraulic Brake Line Kit - Single Axle - 15' - 15SI-BLKIT
Average Customer Rating: 4.6 out of 5 stars (36 Customer Reviews)
Brake line kit lets you run brake fluid from your surge brake actuator to your trailer brakes. Great for disc brakes and torsion axles. Includes 15', 7', and 1-1/2' flexible hoses with swivel fittings; a tee fitting; and hardware.by: Michael03/18/2024
Main line was a little short but was my fault. Brass fittings were very soft and I recommend a real fitting wrench.
by: Jonathan 09/23/2023
Relatively easy to install. Have had for a year now with no issues. Would recommend.
by: Jeff O.01/19/2018
I have a 2011 Lund impact 1775 on a Shorelander single axle trailer which tips the scale around 2500# dry. I felt that surge brakes would be a smart investment and take some pressure off my Ford F150 to help stop that beast. I researched kits, actuators, calipers and rotors and decided on the Kodiak caliper and rotor kit and the Titan actuator. eTrailer had both in stock, a convenient hose kit to boot and fair price so I purchased the lot from them. Delivery was very quick and all of the hardware arrived together and in good shape. It took me one afternoon to assemble the actuator on my swing \-away tongue and another to install the calipers and rotors. There was one snag with the hose kit, in that one of the hoses was incorrect. I contacted Bryan at eTrailer and he was very accommodating; rushing the correct hose to me and then following up by phone when I received it. It took about two hours to finish the installation and I couldn't be more pleased, both with the quality of the products and the first-rate service! I have yet to bleed the system and take it out for a run but I don't anticipate any issues. I fully recommend eTrailer, their products and service!
by: Michael 02/27/2023
Sheryl offered excellent customer service helping me track down the parts I needed. Smooth transaction and prompt shipping. A+ in all aspects.
by: Bob j08/22/2016
Recived the parts for the trailer. Not sure why I didn't get the nuts and washers for the back plate, thought they would come with rest of the brakes, also on the brake line the brass 3 way block was size 3x4x3 and would not fit. Went to [...], they had a 3x4x3 and it works great. The rest of the parts fit Great. Thank you I will be back again. Bob
by: Mitch07/23/2018
I was initially concerned about finding the right parts as the trailer was fairly old. etrailer had just what I needed. The website is so elegant. I was able to find the right parts quickly and with comparative options to make a final selection. The how-to videos are great. This made installation a little more comfortable. Especially when you do not perform this type of work every day. The parts were of high quality and are working as expected. I highly recommend etrailer for any of your trailer needs.
by: Thomas07/05/2020
I added brakes on my boat trailer and these rubber brake lines made the install easy. However, I did have to install all the P clips provided plus a few more to make sure the lines would not chaff against the trailer frame.
by: Philip D.02/19/2017
This hose kit worked great with the disc brake kit I added to my new Haulmark trailer. Tip: I have a 6 X 12 v-nose trailer, but needed all of the hose included in this 15' hose kit.
by: Marc02/24/2018
If you want knowledgeable staff, competitive prices, prompt delivery and an honest opinion etrailer.com is your place. I am a small business owner for 15 years, and learned a thing or two about quality customer service from the team. Oh and Reesa! She is patient, inquisitive and genuinely wants to be sure your experience is positive!
Keep it up etrailer.com!!
by: Bill S02/01/2017
Argued about brake lines, Stainless vs rubber and rubber won base on your sales comments. This is a trailer and not a vehicle where stainless would be better, but car manufacturers use rubber to the wheel.
Good job, but now need warmer weather to get installation done.
by: Nick07/29/2019
Excellent product for the money! Parts and pieces were exactly as described and the quality of everything was exceptional through the installation process. Let's hope that continues through the use and life of the product.
Shipping times and customer service were also top notch! Thanks etrailer!
by: Steve F02/16/2017
Received the brake line kit as ordered. It has not been installed as yet. Looks like it will do the job okay. Would have been happier with a 3/16" ID system rather than the 1/8" as supplied.
by: Barry 01/05/2022
I am a boat mechanic and I have ordered three complete boat trailer brake kits from E Trailer ...all have arrived quickly and exactly as ordered. Great product.
by: Wayne R04/13/2016
a year later brake line kit is holding up well to saltwater use.
by: Andy 07/27/2021
Used this kit for a complete rebuild of my salt water trailer. Install was straight forward and although I launch infrequently, everything is working as it should. No problem recommending the product.
by: John’s Disk Brake Project04/10/2023
Everything appears to be fine with this package
by: heavy trailer brakes07/29/2017
so far so good. item seems heavy enough to handle the forces it will receive on my boat trailer. haven't installed it yet. Arrived fast and in good condition.
by: Ronald11/13/2021
Fit perfectly! Not a single leak! Made this job replacing 20 year old brake lines a breeze!
by: brake hoses07/29/2017
these hoses look good and a smart substitute to steel tube. why mess with the steel when you can get these for a few dollars more? haven't installed them yet. they shipped fast
by: Mickey 09/06/2020
etrailer was fast shipping exactly what was needed great price
by: Jamie B11/18/2019
All of the part fit and work great. I would definitely use them again.
Jamie B.
11/19/2020
All parts are still working. Vary happy. Thanks again.
by: DR09/06/2022
Great product, exactly what I needed.
by: John 12/16/2021
John
12/17/2022
Very good stops my boat well
by: Allen S07/27/2020
works as advertised
by: Joshua03/30/2024
25
36
Show More Reviews
See what our Experts say about this Kodiak Accessories and Parts
- Upgrading Trailer Brakes on a Single Axle Trailer With Heavy Duty Self Adjusting BrakesThe etrailer Electric Trailer Brakes # AKEBRK-35-SA will allow you to upgrade to self-adjusting brakes on your Lippert LCI35 axle. These are the same size as your current drums so as long as they are in good condition you would not have to change to 2 of the Hub/Drums # AKHD-545-35-EZ-K. If you are really wanting to improve your brakes to be the best you should consider Disc Brakes # DE66YR. Disc brakes are far superior and easier to maintain than drum brakes as well. To make this conversion...
view full answer... - Are Dacromet and Stainless Brake Finishes Good for Boat TrailersYes, the Dacromet/Stainless finish on the 10" Kodiak Disc Brakes # KOD67FR is arguably the best for boat trailers since it's the most resistant to rust and corrosion, although it's still a good idea to hose down your trailer with clean freshwater once you're done boating for the day. Then for a flexible brake line kit we have part # 15SI-BLKIT which comes with a 15' lead or the part # 18SI-BLKIT which comes with an 18' lead. Attached are some review videos for you to check out!
view full answer... - How To Add Trailer Brakes To 2500lb Utility Trailer Being Triple TowedUnfortunately there is not a good way to hook up electric trailer brakes to your triple towed utility trailer, and the best option would be going with surge brakes on it that do not require any sort of electric. With that said most states do not allow a triple towed trailer to be very heavy, so I recommend checking that the weight of your triple towed trailer is legal in your area before adding the trailer brakes to the trailer. In addition you will need to make sure the hitch you have...
view full answer... - Replacement Axle with Hydraulic Drum Brakes on a 2,200 Lb Boat TrailerI have the perfect replacment trailer axle for your boat trailer. For this, I recommend using the Dexter Trailer Axle part # T20BTR-7258. The Dexter trailer axle measures 72" from the face of each hub and 58" from the center of each spring seat. The measurements you gave are likely the same as what is listed above because the start of each measurement could vary slightly from person to person. The outside diameter of this trailer axle is 1.75" which should be what is on your trailer now....
view full answer... - Adding Electric Over Hydraulic Disc Trailer Brakes To a 2017 Triton AUT 1272 Utility TrailerI spoke to a Triton trailer representative who informed me that you will have to check your current axle to ensure you have the flange to be able to mount the disc brake caliper for the Kodiak Disc Brake Kit # K2R35D on your 2017 Triton AUT1272 utility trailer. This flange will be a 3" x 3" square with 4 bolt hole located directly behind your idler hub on the spindle. The Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit # T4813102 and Kodiak Hydraulic Brake Line Kit # 15SI-BLKIT...
view full answer... - Are Kodiak Hydraulic Brake Line Kits Compatible With Titan/Dexter Model 10 Surge Brake Actuators? Yes, the Kodiak Hydraulic Brake Line Kit # 15SI-BLKIT is compatible with the Titan/Dexter model 10 Surge Brake Actuators for Drum # T2478100 or Disc # T4750600 brake systems.
view full answer... - Will Kodiak Disc Brake Kit K2R1258L12 Fit a 12K Rockwell Axle on PJ TrailerI am assuming that one of the axles has brakes and the other does not. If that is the case and the axle that does not have brakes has idler hubs then you can use Kodiak kit # K2R1258L12 provided that the hub has an 8 on 6-1/2 bolt pattern and brake mounting flanges on the axle. You will also need some addition brake line and related parts such as what is included in kit # 15SI-BLKIT. Or it may be more beneficial to go ahead and replace all the lines with a tandem axle kit # HS496-252.
view full answer... - Replacement Hydraulic Drum Brake System for a Single Axle Magic Tilt Boat Trailer Yes, you have done your research well. These parts will fit together and allow you to back up without needing anything else. I can confirm that Demco Hydraulic Brake Actuator item # DM8609101 will work with the Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K item # AKUBRK-35-D. These brake assemblies are compatible with the Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized item # AKHD-545-35-G-EZ-K....
view full answer... - Removing Electric Brake System From Car Dolly and Replacing With a Surge Coupler and Disc BrakesIf the existing hubs on your dolly use a # L68149 inner and a # L44649 outer bearing and a 10-19 grease seal, the rotors will be compatible. You'll also need to make sure your existing wheels are at least 14 inches in diameter and have a 5 on 4-1/2 inch bolt pattern, the # T2HRCM10DAC hub/rotor assemblies you mentioned would work great. So long story short, if the rotors are compatible with the spindles and wheels are compatible with the rotors, the Titan # T2HRCM10DAC kit will work well...
view full answer... - Availability of Retrofit Disc Brake Kit with Surge Coupler for Single 3,500 Pound Axle TrailerFor a kit with coupler that will allow you to add disc brakes to your trailer you can use the Titan Disc Brake Kit and Leverlock Actuator with Electric Lockout # T4843300. This kit is for single axle trailer with a 3,500 pound axle. Included in the kit are 2 hub and rotor assemblies with L68419 inner bearings and L44649 outer bearings, RG06-050 grease seals, races, bearing protectors, brake calipers with mounting brackets and hardware, brake line kit, and the Titan Zinc-Plated Leverlock...
view full answer... - Parts Needed to Convert Boat Trailer w/ 10 Inch Electric Drum Brakes To Hydraulic Disc With Oil HubsFirst you will want to verify exactly what size axle you have but it is most likely a 3,500LB axle. I recommend using a Digital Caliper # PTW80157 to verify the grease seal and bearing landing sizes on your spindle. A typical 3,500lb axle will use a Grease Seal # 58846 (1.719" ID), Inner Bearing # L68149 (1.378" ID) and Outer Bearing # L44649 (1.063" ID). If this is what you have here is a list of all the parts you will need for the hubs, otherwise please let me know your spindle dimensions...
view full answer... - Parts Needed to Convert Roadmaster Tow Dolly From Electric Brakes to Surge BrakesThe electric brakes on the Roadmaster Tow Dolly # RM-2050-1 can be converted to surge brakes if you'd like. You'll need the brake assemblies, actuator, and brake lines. For the brakes I suggest # AKUBRK-35. This includes both the left and right hand side which are specific. The brakes are labeled so you know which is which. Our most popular brake actuator is the Demco # DM72VR. This fits a 2 inch hitch ball and has a capacity of 6,000 pounds. For a brake line kit I would go with...
view full answer... - Are Kodiak Disc Brakes Compatible with A-60 Actuator for Disc BrakesYes, the Kodiak disc brakes will work with an A-60 actuator for disc brakes. If you also need a brake line kit, # 18SI-BLKIT includes an 18 foot line and # 15SI-BLKIT includes 15 foot. Both are for single axle trailers.
view full answer... - Recommended Timbren Axle-Less Suspension And Disc Brake Kit For Retrofitting 1974 European TTI have a different option for you, but there is not a 2000lb Timbren Axle-Less suspension that has a brake mounting flange and a spindle that works with hubs that have the 4 on 4" bolt pattern. The # A12RS440 you were looking at does not have a brake mounting flange. Instead you will need to go with the Timbren Heavy-Duty Axle-Less Trailer Suspension - Straight Spindle - Regular Tires - 2,000 lbs # ASR2KHDS01 for your 1974 European Travel Trailer. This option uses 3500lb braking assemblies...
view full answer... - Parts Needed to Add 3,500 lb Hydraulic Drum Brakes For Demco Hydraulic Brake ActuatorWe can definitely put together a hydraulic drum brake kit for a 3,500 lb axle that will go with the Demco actuator, and there is indeed a lockout solenoid that is compatible with the actuator. I'll go ahead and make a list of the parts you need to get set up. - Demco Hydraulic Brake Actuator - Drum - Primed - A-Frame - 2" Ball # DM8609502 - Reverse Lockout Solenoid for Demco Hydraulic Brake Actuators # DM11993 - Hydraulic Trailer Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies...
view full answer... - Outer Diameter of Brake Line Kit # 15SI-BLKITThe outer diameter of the brake line in # 15SI-BLKIT is .411 of an inch or 27/64 of an inch.
view full answer... - Parts Needed to Convert to 3,500 lb Over-The-Hub Disc BrakesThanks for the photos, and based on them we do have what you need, which are over-the-hub disc brakes. The only thing you will need to verify is that you have a 5 on 4-1/2" bolt pattern on your hub; it looks like you do but you'll want to be sure by measuring from the center of your hub's wheel stud hole to the farthest edge of the opposite stud. If that measures 4-1/2 inches you have a 5 on 4-1/2" bolt pattern. I have also added a link below to a printable bolt hole template. Assuming...
view full answer...
- Replacement Electric Brakes for Dexter PR-FF SEC-FF 5.2KPR-GGSEC-GG 12X2XQ 36-89Based on the photo and information you provided, I can tell you have 12 x 2 inch Dexter brake assemblies for 5.2K axles, for which the Electric Trailer Brake Kit # AKEBRK-7-SA will be an excellent replacement. These are self-adjusting brakes so they do not require periodic manual adjustment like standard brakes. To replace the original brake mounting bolts, nuts and lockwashers, you can use # BRKH12.
view full answer...
- Replacement Actuator and Hydraulic Brake Lines for 1989 Escort Boat TrailerYes. As long as you have a 3" wide channel tongue, you can use the Demco Hydraulic Trailer Actuator # DM72VR as a replacement for your current actuator. For new brake lines you'll want to use the Kodiak Hydraulic Brake Line Kit # 18SI-BLKIT which will allow you to replace the brake lines on a trailer up to 18 feet long. There is also a 15 foot kit available with part # 15SI-BLKIT. I don't recommend running them outside of the frame since they could be pinched off quite easily, so we do...
view full answer...
- Should I Use A Steel Brake Line Kit Or A Rubber Brake Line Kit?Though you can definitely go with the all flexible line kits, like the Kodiak Hydraulic Brake Line Kit # 15SI-BLKIT, I do prefer the more traditional steel kits, like the HydraStar Hydraulic Brake Line Kit # HS496-251. I have found the steel line to be a bit easier to mount, especially if there is excess as it can just be coiled up and out of the way, but mostly as they are more durable than their rubber counterparts. Granted, the steel line kits for disc brakes will also use the shorter...
view full answer... - Hydraulic Drum Brakes and Hubs for the 1,200 lb Timbren Axle-Less Trailer Suspension SystemWe actually do have a Timbren Axle-Less Trailer Suspension System rated for 1,200 lbs that comes with a brake flange. It is listed on our site as part # ASR1200S04. With this system you can use the Hydraulic Trailer Brake Kit # AKFBBRK-35 along with the Dexter Trailer Hub and Drum Assembly # 84546UC3-EZ. These are rated for a 3,500 lb axle but will fit on the 1,200 lb axle-less system. If you don't already have brake lines then I also recommend using the Kodiak Hydraulic Brake Line Kit...
view full answer... - Parts Needed for Disc Brake Conversion on 2000-lbs AxleIn order to determine if a disc brake conversion kit is compatible with your trailer, you will need to know what bearings and seals are currently on your hubs. The Kodiak Disc Brake Kit for 2000-lbs Axles # K2HR2D fits on spindles that use an # L44649 inner and outer bearing, as well as an inner grease seal with a 1.500" diameter and an outer seal with a 1.987" diameter. You'll want to pull your old hubs and check your existing bearings for stamped numbers on the back to verify which bearings...
view full answer... - Does Kodiak Disc Brake Kit # 15SI-BLKIT Fit with Atwood Surge Coupler Master CylinderYes, the Kodiak disc brake line kit part # 15SI-BLKIT that you referenced will fit on an Atwood master cylinder you like mentioned.
view full answer... - Replacement Backing Plates and Brake Lines for an EZ Loader Boat TrailerThanks for the photo! I called EZ Loader and they were able to give me the information I needed based on your VIN. In order to replace the backing plates you are going to want to use the Hydraulic Brake Kit part # AKFBBRK-7-D. In order to replace the drums you are going to want to call EZ Loader directly as we do not carry the correct ones for your trailer. However, if you just need the bearings you can use part # LM67048 for both the inner and outer. If you are also looking to replace...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Jeff D
Installed by:
David F
Expert Research:
Jameson C
Written by:
Tammy D
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jeff O.
1/21/2019
I want to thank you again for your assistance in getting me the correct parts for my trailer brake installation. I took three major road trips with the boat last year and the trailer brakes worked flawlessly. The major reasons I installed the braking system were: the overall weight of the boat and trailer in relationship to my pickup 2006 F150 and braking performancesafety on wetslick roads. Both of these concerns were tested last year with wonderful results. I have been telling my friends, with similar trailer packages, to investigate your product. Thanks again,