Dexter Hydraulic Brake Line with Fittings - 13" Long
(35 reviews)
Price: $41.55
In Stock
Dexter Hydraulic Brake Line with Fittings - 13" Long
Item # T0777300
Our Price: $41.55
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (35)
- Q & A (0)
- Videos (1)
- Photos
Dexter Accessories and Parts - T0777300
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- Brake Lines
- Brake Line Components
- Dexter
- 13 Inch Long
- Flexible Brake Hose
Perfect for use with foldaway trailer tongues, this flexible hose functions as part of a hydraulic brake actuator system. Connect line to your actuator's master cylinder to route brake fluid to your trailer's brakes. Fittings included.
Features:
- 13" Long hose connects hydraulic brake actuator to trailer brakes when used with additional lines and fittings (not included)
- Flexible design makes hose perfect for use with foldaway trailer tongues
- Brake line is furnished with 3/8"-24 UNF male and female fittings on ends
071-A52-00 Dexter Axle 13" Long Tubing
Replaces Titan 0777300
Video of Dexter Hydraulic Brake Line with Fittings - 13" Long
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Titan Trailer Brakes T0777300 Review
Today we're going to take a look at the Titan 13" long hydraulic brake line with fittings. Now, this is a 13" long hose, which will connect your hydraulic brake actuator to your trailer brakes when it's used with additional lines and fittings. Now those additional lines and fittings are not included. You would have to purchase those separately. We do sell them separately on our website, and they are listed on this product page as a related product. This hose is a flexible design, which makes it perfect for use with fold-away trailer tongues. The brake line is furnished with 3/8" x 24 UNF male and female fittings on the ends.
Now the male fitting right here is what will thread into your brake actuator. The female fitting here is what will attach to the first steel brake line in your brake system. But I am going to put a measurement on it just to show you from end to very end is right at 13" long. But that should do it for the review on the Titan 13" long hydraulic brake line with fittings.
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Did not arrive in time
Customer Reviews
Dexter Hydraulic Brake Line with Fittings - 13" Long - T0777300
Average Customer Rating: 4.7 out of 5 stars (35 Customer Reviews)
Perfect for use with foldaway trailer tongues, this flexible hose functions as part of a hydraulic brake actuator system. Connect line to your actuator's master cylinder to route brake fluid to your trailer's brakes. Fittings included.
by: Hal C09/07/2017
exactly the part I needed, ordered from etrailer's excellent website. I tried to source these from the local auto parts store (they may have had them in stock somewhere) but they fumbled around for 15 minutes trying to figure out what car might have this part on it. Let's see, is it a 65 Chevy truck.....no, maybe a Ford....no. If it isn't a specific model of car, the parts store people can't find the part using their computer systems.
by: Robert09/11/2018
The parts arrived as expected. Installation was easy for the most part, once the hard brake lines were changed to fit. Knowing that these additional parts and many other additional parts, such as a reverse lockout solenoid, vehicle and trailer electrical connectors and wires, would be necessary for converting surge brake drum brakes to disc brakes would have been helpful as a "complete" conversion kit. Noah was very helpful in helping me to order the correct parts for this conversion.
by: Dustin06/25/2022
Had damage to my brake line from my swing away hitch on the boat trailer. This replacement was just what I needed and it’s held up fine.
by: Steve 06/08/2023
Quick delivery part is as described
by: Craig L07/06/2016
Received my order promptly and the part worked fine.Very happy with E-trailer.
Craig L.
7/19/2017
Works fine ,very satisfied
by: Steve M12/19/2016
Good value. I bought the cheapest shipping, took about a week. The week before I bought a surge brake coupler and wheel cylinders. These came UPS ground. They were delivered 20 hours after I ordered them. Very good service.
by: Rod S.05/09/2014
I have ordered an automobile hitch, and now expanded ordering to include brake parts. In each case e-trailer has been very helpful to overcome questions.
Excellent service, helpful people.
by: Richard02/23/2019
The product was fine and as ordered. Price was reasonable. Only problem was in delivery as it sat in a postal facility for 5 days according to my tracking. While this is not etrailers fault it is something they need to address with the postal service.
by: Buddy01/16/2018
I received the master cylinder found the orifice connector won't fit, had to order T1209800 to fit.
by: Chuck H.08/14/2017
Great people to talk to and very helpful. This product didn't fit my application And I had to send it back. No problem. I'll certainly use etrailer for my future trailer needs. Fast shipping great customer support.
by: Philip 09/29/2022
Just the part i needed for a discontinued trailer.
by: Doug S08/07/2012
Used these hoses to attach steel brake lines to disc brake caliper on a torsion axle. Worked fine.
by: Peter09/26/2020
Perfect size and were the exact replacement for my trailer.
by: Shane 10/16/2019
Brake lines showed up quickly and fit p erfect.
by: Steve03/09/2023
Worked great
by: JHH11/10/2015
As usual, the folks at etrailer helped me pick the right item and shipped it right away. Happy with purchase.
by: Bill 12/07/2020
They fit perfectly and work great!
Bill
12/8/2021
Still working with no problems.
by: Stephen 04/19/2023
Stephen
4/20/2024
Hose length is too short. Installed hose and realized that I was repeating the same condition of a too tight of a radius of turn in the hose to screw into caliper. Previous brake llines were pinched in the turn and when brakes applied, not enough fluid was reaching the calipers to engage brakes. Replaced all lines with 3 inch longer lines from NAPA.
by: Scott01/17/2015
Even though it was too short and I could not use it the line is well made for the price. I wish I could return it.
by: Mitch S.10/12/2016
The products I ordered were of the quality expected. Quick turnaround on my order.
by: Bob04/07/2015
Item was exactly as described and arrived quickly, would use them again.
by: Ryan07/14/2015
parts worked fine
by: Ron07/12/2013
Bolted right up!
by: Thomas H01/05/2019
Quality parts. Quick delivery
25
35
Show More Reviews
See what our Experts say about this Dexter Accessories and Parts
- Pros and Cons of Adding Cast or Aluminum Disc Brake Calipers to a Boat TrailerThe first thing to do is verify that the the disc brake calipers and wheel bearings will fit your trailer. The majority of 3,500 lb axles use # L68149 inner, # L44649 outer bearings and the # RG06-050 grease seals, but you should check to be sure. Next, make sure the wheels on your trailer are 14 inch diameter or larger, and that the spring on your trailer is at least 3 inches from the outer face of the brake mounting flange so that the caliper can be installed without contacting the inside...
view full answer... - Will Kodiak Disk Brake Caliper on Kit # K2HR35DS Accept 3/8 Inch FittingI spoke with my contact at Kodiak and he said the 3/8"-24 UNF male fitting on Titan brake line, part # T0777300, will not fit the Kodiak caliper thread on Kodiak Disc Brake Kit # K2HR35DS. Your fitting will need to be 3/16". I have linked you to a page showing all of our brake lines for you to check out.
view full answer... - Hinge Kit Recommendation for a Shorelandr Trailer with Surge BrakesFor a 3x5 trailer tongue, I'd recommend the Fulton # FHDPB350101 coupler hinge kit. Keep in mind that this hinge isn't for use with aluminum trailer frames. You'll also need to install a piece of flex brake line like the # T0777300 that you referenced. I've linked you to a video that contains more information about the hinge.
view full answer... - How to Modify Brake Lines for Folding Tongue Boat TrailerYou could the 25 inch long hydraulic brake line with fittings, part # T0980100. You would just need to connect the line to your actuator master cylinder to route brake fluid to your trailer brakes. The fittings are included. We offer the flexible line in a few different lengths as well. For example # T0777300 is 13 inches long.
view full answer... - Can a Fold-Away Trailer Tongue Hinge Kit Work with Hydraulic Surge BrakesYou can use a fold-away hinge kit with a surge coupler but you will need to replace the hard brake line with a flexible hose like # T0777300 that you have referenced. For fold-away drum brake applications use # T4839000. For a 3 x 4 inch tongue use 2 adapters # T4842100.
view full answer... - Recommended Trailer Tongue Hinge Kit for 3x5 Inch Frame on Shorelander Boat Trailer w/ Surge CouplerFor a 3x5 trailer tongue, I'd recommend the Fulton # FHDPB350101 coupler hinge kit. Keep in mind that this hinge isn't for use with aluminum trailer frames. You'll also need to install a piece of flex brake line like the # T0777300 that you referenced. I've linked you to a video that contains more information about the hinge.
view full answer... - Brake Lines for Titan Coupler with Brake Line Connection Within Trailer TongueThe Brake Actuator with Manual Lockout - Bolt On - Drum - 2" Ball - 7,500 lbs # T63FR does require the brake line inside the trailer tongue prior to the actuator. This simply requires a hole be drilled to allow the entry/exit of the brake line. I recommend the Titan Hydraulic Brake Line with Fittings - 13" Long # T0777300 for a simple solution. Unfortunately I don't have a video of that installation for you.
view full answer... - Replacement Adjuster Plugs and Brake Line for Brake Actuator on Trailer with Surge BrakesAs long as the brake line you need uses 3/8 inch 24 UNF male and female fittings you can use # T0777300 if a 13 inch line is long enough. If not we have # T0776500 that 18-25/32 inches long which is more than enough. The adjuster plugs we carry are # 46-7 for one or # BP10-220 for a pack of four.
view full answer... - What are the Fittings on the T0777300 Brake LineThe flared connections on the Titan Hydraulic Brake Line # T0777300 are 3/8"-24 UNF male and female fittings.
view full answer... - Will a Fold Away Coupler Work on a 2002 Blazer Bass Boat Trailer with Hydraulic Surge BrakesYes, the Fulton Fold-Away Hinge Kit for 3 x 3 inch Trailer Tongue - Weld-On, item # FHDPW330300, will work on a trailer with surge breaks. You will need to determine the length of the coupler that will be in front of the fold away to select the appropriate length of flexible hydraulic brake line to allow the foldaway to fold without damaging the brake line. We have several lengths of flexible brake line available for this. Titan Hydraulic Brake Line with Fittings - 12-27/32 inches Long,...
view full answer... - Selecting a Brake Line Kit for Boat Trailer Being Converted to Disc BrakesYou are correct to place your disc brakes on the rear axle of your boat trailer since this is where most of the weight will be carried (nearer to the boat's motor). Disc brake and torsion axle applications both require flexible brake lines so yes you can use the kit you referenced, part # DM5424. This kit includes 18-7/8-inch long flexible lines, but if your measurement shows you need longer flex lines we offer various sizes of lines; part # T0777300 is 13-inches; part # T0776500 is 18-25/32-inches...
view full answer... - Parts Needed to Install Titan Disc Brake Kit and Swing-Away Actuator # T4843300The Titan Disc Brake Kit you referenced, part # T4843300 includes the flex line to make the transition between the actuator and swinging portion of the trailer tongue and the stationary portion. The brake line would then transition to hard line until the axle is reached, where the second piece of flex line would make the transition to the hard line that runs along the axle. At this point, you will need two flex lines, part # T0777300, brackets, part # T0776300 and retaining clips, part...
view full answer... - How to Shorten Hydraulic Disc Brake LinesThank you for your purchase from etrailer! The flexible brake lines you selected, Titan # T0777300 and # T0776500, are not designed for cutting. These are offered in the various lengths to allow you to avoid that need and these flex lines are also intended for use near the brake assemblies where their flexibility allows them to handle the motion of the trailer suspension. If you purchased elsewhere a brake kit with rigid steel lines you will need a flaring tool (which we do not offer)...
view full answer... - Parts Needed to Convert Titan Model 6 Drum Brake Actuator # T4079200 to 4-Disc Brake OperationIt is possible to rebuild a drum brake actuator to handle the higher pressure and fluid displacement required for disc brake assemblies. However, in the case of your four Kodiak disc brakes (part # K1HR35D) for use on a tandem axle trailer these will require more fluid displacement than can be provided even by a modified Model 6 actuator. A drum-to-disc-modified Model 6 actuator could handle the requirements of two brake assemblies but not four, according to my contact at Titan. He advised...
view full answer... - Is a Flexible Hose Needed to Connect Titan Reverse Lockout Solenoid Valve # T4748800You will need to add a flexible brake line hose only if your trailer coupler uses a hinge at the rear of the coupler (if it is a foldaway type). If so, we offer flexible brake line hoses in three lengths, each with male and female 3/8-inch-24 UNF fittings. The 13-inch hose is part # T0777300; the 18-inch hose is part # 18018-SF; and the 25-inch hose is part # T0980100.
view full answer... - Will the Flexible Brake Hose # T0777300 Fit on 3/16 Inch ThreadsThe Titan Hydraulic Brake Line with Fittings, # T0777300, is equipped with 3/8 inch -24 UNF fittings that fit on 3-1/16 inch threaded fittings so it should work for you.
view full answer... - Troubleshooting Sticking Trailer Surge BrakesAs long as your Titan model 60 surge brake actuator is rated for disc brakes and is in good working order it should have not problem activating 4 sets of brake assemblies. If your brakes are sticking all of a sudden after having an additional set of brakes installed I would take the trailer back to the shop that did the work and have them go over their installation to see what they possibly messed up. Normally sticking surge brakes are the result of worn out actuator components, so it...
view full answer... - How to Add Brakes to Shorelandr YAV2413SW Trailer To add brakes to your Shorelandr YAV2413SW trailer. You will need to know the dimensions of the spindle so that we can determine what hub/drums you would need. Also you will want to know what lug pattern you have so we can get you a set of hubs that does not require you to swap out your wheels. You also will need to know if you have brake mounting flanges on your current spindles as well. I attached a help article that will walk you through the entire process of adding brakes to your trailer....
view full answer...
- Parts Needed to Repair Brake Line Connection on Titan Model 60 Hydraulic Trailer CouplerIt looks like that is a piece of flexible brake line you are using. You would need standard flexible brake line with a 3/8 inch male fitting. We offer them in varying lengths. A 13 inch long brake line with fittings (male on one end, female on the other) is available as part # T0777300, 18-25/32 inch length as part # T0776500 or a 25 inch long line is available as part # T0980100. If you do not already have one installed, I would recommend a solenoid shield, part # T4835800183 to protect...
view full answer...
- Will Titan Disc Brake Kit and Aero 7500 Actuator Fit A 3 Foot Swing Away TongueYou will just need to order a few extra parts to be able to use the Titan Disc Brake Kit and Aero 7500 Actuator w/ Manual Lockout on your swing away tongue that is 3 feet long. You will need to order the Titan Hydraulic Brake Line with Fittings - 12-27/32 Inches Long, part # T0777300, the Titan Hydraulic Brake Line with Fittings - 30 Inches Long, part # T1061900, and the Titan 3/16 Inch Hydraulic Union, part # T1287900. The 30 inch long brake line # T1061900 will attach to the actuator,...
view full answer... - Plumbling Hydraulic Brake Lines for Tri Axle Boat TrailerAlthough I don't have a diagram for a tri-axle trailer, I do have one for a tandem. If you refer to the photo, you would plumb the brake lines as shown, but would add the additional lines and tees for an extra axle. Here's the part numbers of the items shown in the photo. (A) 12-27/32" Long flexible hose ( # T0777300) (B) 18-25/32" Long flexible hoses ( # T0776500) (C)19' Long steel line ( # T4336000) (D) 66" Long steel lines ( # T1086600) (E) 30" Long steel line (...
view full answer...
- Titan BrakeRite Hydraulic Brake Line for Converting Hydraulic Surge BrakesYou will need the Titan Hydraulic Brake Line # T0777300 to connect your brake lines to the Titan BrakeRite # T4813102.
view full answer... - Will the Titan Hydraulic Brake Line with Fittings # T0777300 fit 3/16 inch Brake LinesYes, the Titan Hydraulic Brake Line with Fittings # T0777300 will work with your 3/16 inch brake lines. The fittings are standardized so you will not need an adapter or anything; it will already fit the flare fittings that you currently have. Keep in mind that this has one male end and one female end so you will want to make sure that it is compatible for your purpose. Brake lines do not have a psi rating which is why you cannot find one.
view full answer... - Extending Brake Line from Back of Master Cylinder to Use Electric Lockout SolenoidYou should just need flexible brake line # T0777100 which has 3/8 inch UNF female fittings on both ends. The Solenoid will install directly to the back of the master cylinder, then this short hose which will then connect to the hose already on the trailer. If you need one with a female fitting on one end and a male on the other use # T0777300.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Installed by:
Jeff D
Updated by:
Wilson B
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Hal C.
9/7/2018
Exactly the right length I needed, unavailable at local parts store. Thats why I come to etrailer.