Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21754 Review Video

I would place the roller bunks in the same orientation as the wood bunks that were there previous. There would be no need to extend them out further. Normally the bunks extend just a bit past the rear of the trailer frame like the picture I…

The overall measurement from the top of the roller to the bottom of the U channel is 2-1/2 inches. I have provided a photo for you that shows the dimension you inquired about. I have linked you to a parts review video for the Roller Bunk #DL21741…

The Boat Trailer Deluxe Roller Bunk - 5' Long - 12 Sets of 3 Rollers, item #DL21741, is rated for 3,000 pounds boat capacity.

The only way the roller bunks like #DL21741 could cause damage is if they were improperly positioned, installed, or the boat exceeded the 3,000 pound capacity. They may leave some marks on the boat from the black rollers but other than that you…

The Dutton-Lainson Boat Trailer Deluxe Roller Bunks 5 Feet Long Sections #DL21741 have a weight capacity of 3,000 pounds per set. As long as there is no more than 3,000 pounds on a single set of roller bunks, you can use the #DL21741 bunks for your…

I received your picture but not the spec sheet. The 10" CE Smith Deep V Keel Roller Assembly #CE10404G is a universal keel roller that helps make loading and unloading your boat much easier. The roller itself is 9-1/4" long while the…

I looked up pictures of trailer that typically carry the 16 ft sea nyph fishing machine and yes roller bunks like the #CE27700 can be used on it.

You have a couple of options for rollers on your Shorelander trailer. If you want to completely cover the 7 foot bunks you currently have, you can attach a 4 ft roller like part #CE27700, and cut another to cover the 7 ft board. If you do mount the…

For your application I recommend installing roller bunks as well as some guide-ons to help make loading your boat MUCH easier with your conditions. The Caliber Marine Teflon Slides look like they would help to make loading/unloading the boat easier,…

The rollers on the Dutton-Lainson Boat Trailer Deluxe Roller Bunk, #DL21741, are made from solid, high grade rubber. A roller has a diameter of 2-1/4 inches and a width of 1-5/16 inches. The roller hole size in the middle is 9/16 and it will fit on a…

I spoke with the Dutton-Lainson Engineering department, and the rollers are 5 inches wide, outside to outside on the double rollers like the #DL21754. I attached a picture of the dimensions of the triple rollers too which is oddly narrower.

Roller bunks don't help the water level rise, but they do help with getting a boat on or off a lift. Because your current bunks are 8 foot, you can use 2 sets of the Boat Trailer Deluxe Roller Bunk - 4' Long - 10 Sets of 3 Rollers - by…