Can Dutton-Lainson Roller Bunks Accommodate 6,000 Pound 27 Foot Regal Ventura Boat
Question:
I have a 8.3 27 ft regal Ventura, weighs 6000 lb, and it is a [pain] to load/unload. These roller bunks are a great concept, but is my boat too big
asked by: Robert
Expert Reply:
The Dutton-Lainson Boat Trailer Deluxe Roller Bunks 5 Feet Long Sections # DL21741 have a weight capacity of 3,000 pounds per set. As long as there is no more than 3,000 pounds on a single set of roller bunks, you can use the # DL21741 bunks for your Regal Ventura.
The number of roller bunks you need depends on the length of the existing bunks on your boat trailer. For example, if your existing bunks were 15 feet long, you would want 3 of the 5 foot sections of # DL21741 for each side. As long as there was no more than 3,000 per set of bunks, all together the 3 sets of bunks could hold up to 9,000 pounds.
The Dutton-Lainson rollers come in 5 foot sections # DL21741 and 4 foot sections # DL21740. The 4 foot sections have a weight capacity of 2,500 pounds per section.
Your 6,000 pound boat will work great with the Dutton-Lainson Deluxe Roller Bunks 5 Feet Long Sections # DL21741 as long as no more than half of the boat's weight is on a single set of rollers.
Products Referenced in This Question
Boat Trailer Deluxe Roller Bunk - 4' Long - 10 Sets of 3 Rollers - by Dutton-Lainson
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- Dutton-Lainson
more information >
Product Page this Question was Asked From
Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- Dutton-Lainson
more information >
Continue Researching
- Shop: CE Smith Roller Bunks for Boat Trailers - 5 Rollers Each - 4' Long - 1,500 lbs - 1 Pair
- Shop: CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel and Yellow TPR - 12"
- Shop: Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers
- Shop: Boat Trailer Deluxe Roller Bunk - 4' Long - 10 Sets of 3 Rollers - by Dutton-Lainson
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21741 Review
- Shop: Ark Ezi-Guides Self-Aligning Boat Trailer Loading System - 20' to 28' Long Power Boat
- Q&A: Overall Height Measurement From Top of Roller to Bottom of U Channel on DL21741 Roller Bunk
- Q&A: Weight Capacity of Deluxe Trailer Bunk Rollers
- Q&A: Install Photo of Ark Ezi-Guides Self-Aligning Boat Trailer Loading System
- Q&A: Will Using Roller Bunks on a Boat Trailer Damage the Boat
- Shop: CE Smith Heavy Duty, Vertical Bunk Brackets - 85 and 95 Degree Set - Galvanized Steel
- Shop: Boat Trailer Standard Roller Bunk - 4' Long- 10 Sets of 2 Rollers - by Dutton-Lainson
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21755 Review
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE32003G Review
- Video: CE Smith Boat Trailer Parts CE10161GA Review
- Video: Dutton-Lainson Roller Bunks for Boat Trailers Review
- Video: Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21754 Review
- Video: Dutton-Lainson Boat Trailer Roller Bunk Bracket Installation
- Search Results: dl21755
- Search Results: dl21742
- Q&A: Recommended Roller Bunks for 12 Foot and 16 Foot Long Boat Trailer Bunks
- Search Results: roller bunk
- Q&A: How to Install Wobble Rollers on Older Boat Trailer
- Q&A: Could Roller Bunks be Used for Flat Bottomed Pontoon to Make Shoreline Ramp
- Search Results: wobble roller assembly
- Search Results: wobble rollers
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer jack
- Shop: Trailer Wiring