CE Smith Carpeted Bunk Boards for Boat Trailers - 5' Long - 1 Pair
(625 reviews)
Price: $79.89
In Stock
CE Smith Carpeted Bunk Boards for Boat Trailers - 5' Long - 1 Pair
Item # CE27820
Retail:$208.99
Our Price: $79.89
You Save: 62%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (625)
- Q & A (0)
- Photos
CE Smith Boat Trailer Parts - CE27820
- Bunks
- Bunk Boards
- 3-3/4 Inch Tall
- 60 Inch Long
- 1-3/4 Inch Wide
- CE Smith
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 5-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.
Features:
- Carpeted, wooden bunk boards support your boat's hull during trailering
- Marine-grade black carpeting with velvety finish is strong, soft and weather resistant
- Minimizes scratches on the hull
- Resists mold and mildew
- Rinses off easily and dries quickly
- Bunk boards install easily in either of 2 ways
- Mount to existing brackets on trailer frame
- Attach to trailer frame with swivel brackets (sold separately), allowing for height and angle adjustment
- Copper-free construction is safe to use with aluminum and steel boats
- Made in the USA
Specs:
- Quantity: 2 bunk boards
- Dimensions: 60" long x 1-3/4" wide x 3-3/4" tall
- 3-Year sun-fade warranty on carpeting
These carpeted bunk boards provide hull support for your boat during transport and storage. Each 5-foot-long board is wrapped in weather-resistant, marine-grade black carpet. You can run the bunk boards front to back for traditionally shaped hulls or side to side for flat-bottom boats, kayaks and inflatables.
To attach the bunk boards to the front and rear crossmembers of your trailer frame, use existing brackets or a four-pack of swivel mounting brackets (CE10000G-4, CE10001G-4 or C10002G-4 - sold separately). These brackets allow you to install the bunk boards at different heights. In addition, they enable the bunk boards to tilt to accommodate and support boat hulls of different sizes.
27820 Replacement Bunk Boards by CE Smith - 60" Long - Qty 2
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
Customer Reviews
CE Smith Carpeted Bunk Boards for Boat Trailers - 5' Long - 1 Pair - CE27820
Average Customer Rating: 4.8 out of 5 stars (625 Customer Reviews)
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 5-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.by: Guy C.08/06/2013
I purchased this set of bunks to replace the set on my trailer that is over 15 years old. For the price they appear to be great. Well made.
Installation took about 45 minutes for both. That includes removing the old set, new hardware and mounting the new.
With the new bunks it made unloading and loading my boat very simple. Thank you E-trailer.
Ray K.
6/12/2015
I recently purchased two sets of bunks boards for my trailer. Although I have not installed them yet, they seem to be of good quality and I am initially very happy with them. I am most impressed with the etrailer web site and how easy it was to order and how fast it was shipped and delivered. Since it was shipped to Canada I expected it to be delivered in 10 days and it was delivered in 3 days. I will definitely use etrailer again.
by: Tom 11/30/2023
Exactly the product I ordered, quick shipping, quality product that fit the trailer peefectly, easy installation. Will definitely order from etrailer again should the need arise.
by: Jason06/24/2020
Better than I expected! I expected regular 2x4’s wrapped in carpet. Drilled them to tap mounting screws underneath and we’re a plastic synthetic material. Carpet and the work is top shelf! Glad I went with these instead of trying to make them myself! Package arrived sooner than expected which was cool!!
Thanks!
by: David 06/12/2023
Fit in place for my application and holding up well to wear.
by: druggles8509/16/2014
Item is as described. I have them installed on the trailer for my 14' lone Star boat. These bunks cost less than the carpet alone from the large marine retailer in my area. They're not pressure treated and feel light, but it was nice to buy pre-carpeted bunks. If they last a couple years I'll be satisfied.
Druggles85
9/16/2015
One year later, havent used the boat much, but the bunks are still straight as an arrow and look like new.
by: Don 10/23/2023
Excellent customer service and excellent product.
by: Martin01/13/2020
Bought several parts from eTrailer to complete this restoration and transformation of a 1958 trailer to suit my needs today. Couldn't have done it in only 4 days without the help from this great company with quality products!
by: Mark04/18/2015
fit like a glove. bolted in place no problems at all. look and work great.
by: Stephen10/06/2022
the bunk boards arrived in very good shape, the carpet is very nicely done.
by: John L07/21/2017
I was originally looking for material, glue and staples to re upholster the bunks on my boat trailer. I found new bunks complete and ready to go on your web site. I came to my senses and bought them. To make the job easier and nicer I also bought new bolster swivel brackets. It was much easier to set the new bunks next to the old
ones and mount the new hardware. You have two great products, I would highly recommend both.
by: Robert L08/15/2013
These bunk boards were in perfect condition, and they look great.
Robert L.
2/13/2015
Theyre perfect!
by: Claus02/07/2015
Bought these two along with a set of four bunk brackets, and all was delivered with free upgraded shipping from etrailer.
These boards are perfect and saved me the time of making my own. By the time I would have done so, the cost would have been higher than what I paid here, and probably not as professional looking.
Great product and fast shipping!
by: Rod 10/25/2022
Product is what it was advertised as. They should work fantastic. Fast delivery.
by: Jerry Grammer 07/23/2019
Very happy with the new bunk boards I bought for my boat trailer. Not only did they make my trailer look new again, it made loading the boat much easier.
by: jeff k04/22/2013
Bunk boards were easy to install. The price was right. No more expensive than purchasing boards and carpet and covering them my self. A real time saver.
by: Charles05/07/2016
product USA made.great product. etrailer is the best they get six stars.
Charles
5/7/2017
One year old and they are doing fine..would purchase again..
by: Jeff S.08/02/2016
These bunks are well made and carpeted with a very sturdy and attractive material. You could make your own, or you can bolt these on and go. I chose to bolt and go.
by: Phil G07/09/2014
Exactly what I needed to repair my jet ski trailer.Excellent quality and fit perfectly.Salesperson very knowledgeable and helpful. Will do business with them again.
by: Brett12/12/2016
Installation was easy and they work great good product holding up great over a year later
by: James09/15/2021
The product was delivered very fast and the quality was excellent. Would highly recommend etrailer.com and CE Smith carpeted bunk boards,
by: David08/14/2018
I will be installing the bunk boards tomorrow and will send you pictures in the near future. The product was received in good order and in good time. Just as pictured on your ad.
by: Bonila,01/25/2019
I installed them on my trailer 6 months ago and the look great and are doing what they are supposed to and still look like new. Great quality!!!
by: Butch07/12/2016
New bunks were very easy to layout and install over new brackets for my boat trailer rebuild.
by: Vernon03/08/2019
the parts are great a lot heavier duty then I was expecting. I am very happy with the products. the only suggestion is to make it more clear on the parts that come with no mounting bolts so you know to order the extra hardware.
by: Corey W03/30/2020
Great bunk boards. Easy install and still going strong
25
603
Show More Reviews
See what our Experts say about this CE Smith Boat Trailer Parts
- Replacing Rollers with Bunk Boards on Lund Boat Trailer There's no particular reason you can't replace the rollers on your Lund trailer with wooden bunks. To do this I recommend taking a look at the CE Smith Bunk Boards # CE27820 which include two 5 foot long pre-carpeted boards that will work great. The black carpeting is marine-grade so it's going to hold up just fine to frequent water exposure. To install the boards you will just need a set of bolster brackets like the CE Smith Galvanized # CE10000G-4 along with the U-Bolts and hardware...
view full answer... - Recommended Bunk Brackets for Zodiac Inflatable Pontoon Boat Trailer The CE Smith Bolster Bracket # CE10052-32G features a span of just barely over 15 inches so it might be a bit small to comfortably support the 16 inch tubes on your Zodiac Inflatable Boat. You will likely be better off using a set of standard brackets like the CE Smith # CE10196G-4 that feature a swiveling design to let you tilt the bunk boards at an angle for the pontoon. For the bunk boards themselves you can use the CE Smith Carpeted Boards that are available in lengths of 7 feet #...
view full answer... - Replacement Bunk Boards for Trailer with 5 Foot 4 Inch Long Existing Bunk BoardsAs long as you've got the room, you can use bunk board that's a bit longer like the CE Smith 6ft Long Bunk Board # CE27840 or shorter like the CE Smith 5ft Long Bunk Board # CE27820. If you wanted a bunk board that is exactly 5'4" long you could source your 2x4 locally, cut it to your desired size and then use the CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards - Black - 18' Long x 18" Wide # CE11349 to cover the boards you purchased. This comes in a roll that is 18ft long, so it's...
view full answer... - Parts Needed to Switch a 98 Shoreland'r Trailer From Rollers to BunksWhile there is no specific kit for switching your 98 Shoreland'r from rollers to bunks, it should be relatively straight forward. It looks like your rollers should be bolted on, so you should be able to remove those and then add bunks. You will need CE Smith Carpeted Bunk Boards # CE27820, CE Smith Bolster and Swivel Bracket Assemblies # CE10001G-4 and CE Smith U-Bolts # CE15283GA-4. I have also linked our selection of bunk boards in case you need a different length. I recommend getting...
view full answer... - Switching From Roller Bunks to Carpeted Bunk Boards for 20 Foot TrailerYou can switch from roller bunks to carpeted bunk boards, and for a 20 foot trailer you will simply need to add four of the 5 foot CE Smith Carpeted Bunk Boards for Boat Trailers # CE27820. You can attach them to your trailer frame with the appropriate length of swivel brackets, depending on what you need: - 9 Inch: CE Smith Bolster and Swivel Bracket Assemblies # CE10000G-4 - 11 Inch: CE Smith Bolster and Swivel Bracket Assemblies # CE10001G-4 - 13 Inch: CE Smith Bolster and Swivel Bracket...
view full answer... - How To Replace a 10' Bunk Boards On a Boat TrailerThe best option we can offer to replace a 10' bunk board is two 5' bunk boards, the CE Smith Carpeted Bunk Boards part # CE27820 which will work just as well. The longest bunk boards we sell as one piece is 7'.
view full answer... - Parts Needed To Convert Boat Trailer From Rollers To Bunk BoardsSwitching from roller bunks to bunk boards on your boat trailer is fairly straightforward. For the most part, you will just be replacing the rollers with the boards. We have the following bunk boards available: -CE Smith Carpeted Bunk Boards for Boat Trailers - 3' Long # CE27800 -CE Smith Carpeted Bunk Boards for Boat Trailers - 4' Long # CE27810 -CE Smith Carpeted Bunk Boards for Boat Trailers - 5' Long # CE27820 -CE Smith Carpeted Bunk Boards for Boat Trailers - 6' Long # CE27840 -CE...
view full answer... - What Is The Recommended Bunk Board Length For 16' Long Boat?Ideally you want bunk boards that are at least 50% of the length of your boat, and want the to run from the stern and as far forward as you like. Since your boat is 16' Long you will want at least 8' of bunk boards, but I recommend going with two of the 5' Bunk Boards # CE27820 on each side of the trailer. You will need two sets of the mounting brackets # CE10000G-4, and will also need U-bolts to attach the brackets to your trailer. If you can tell me the size of your frame I would be...
view full answer... - Can Bunk Boards Be Added To A Malone TrailerYes, if you removed the crossbars you could easily attach a set of bunk boards to one of the Malone Trailers. I recommend the CE Smith Bolster part # CE10000G-4 with a bunk board of your choosing such as the CE Smith Carpeted Bunk Boards for Boat Trailers part # CE27820.
view full answer... - Fitment and Parts Needed To Mount Roller Bunks On a Trailer For a V-Hull BoatYes, you can use the Boat Trailer Standard Roller Bunks # DL21755 on a boat that has a V hull. These can be attached to the edge of 2" X 4" Bunk Boards # CE27820 or to Boat Trailer Roller Bunk Brackets # DL21762. The mounting brackets can be angled to match the angle of your boat to ensure that the weight is evenly distributed across all the rollers.
view full answer... - Bunk Boards Needed to Carry Kayaks on Boat TrailerYou can actually purchase the carpeted bunk boards and the brackets that hold them, like what is on the CE Boat Trailer # CE48810, separately. This way you can add more to your trailer if you have the room for it. The Bolster and Swivel Bracket Assemblies # CE10000G-4 can be installed on your boat trailer using the CE Smith U-Bolts # CE15283GA-4. These U-Bolts are 3-13/16" long, 3-1/16" wide, and have a 1/2" diameter. For bunk boards we have a couple of different length options for you...
view full answer... - Can The 5' Bunk Boards # CE27820 Be Used As Guide-Ons? Yes, the CE Smith Carpeted Bunk Boards # CE27820 can also be used as guide on bunks. We do have the Kit # CE27600 which uses these same bunks if you are needing everything.
view full answer... - Availability of 4 Foot Long Carpeted BunksWe don't have 2x6 bunk boards that are 4 feet long, but we do have 2x4 carpeted bunks that are 4 feet long. For that you would want the part # CE27810. I attached an install video for you to check out as well.
view full answer... - Replacement Bunk Boards for a Boat TrailerWe do have a selection of bunk boards available which you can use for a variety of lengths. Below are the different lengths we carry: 2' - # CE27850 3' - # CE27800 4' - # CE27810 5' - # CE27820 6' - # CE27840 7' - # CE27845 Since bunk board brackets can sit at different locations along the boat frame you'll just need to compare the different lengths to what you currently have and you'll be good to go!
view full answer... - Could Metal V Brackets Attach to Trailer Instead of Swivel Bunk Board BracketsThat would depend entirely on the trailer setup and how the V brackets are currently attached. At worst you could have them cut off and then as long as there are trailer crossmembers you could use swivel brackets like the # CE10000G-4.
view full answer... - What Parts Are Needed to Replace Roller Bunks with Wood BunksWhile we don't have wooden bunks that are as long as you need we do have the brackets you can use with part # CE10000G-4 which you'd use u-bolts like the part # CE15283GA-2 to secure to the crossmembers that run left to right on your trailer. The front to back beams that your rollers are on would need to come off.
view full answer... - Bunk Board Recommendation for a Boat Trailer that Calls for 6 foot and 10 foot BoardsThe longest bunk boards we carry are 6 feet long like the part # CE27840 that you referenced. You could use two sets of the 5 feet long boards like part # CE27820 for the section that calls for 10 feet.
view full answer... - Pontoon Boat Carpeted Bunk Trailer RecommendationWe sell carpeted bunks that should work for you trailer, they are sold in differing lengths. You will need to measure the lengths of the bunks currently on your trailer to determine what length bunks you should get. We offer the following lengths, they are all 2x4's covered in carpet: 6 foot long CE Smith Bunks part # CE27840 5 foot long CE Smith Bunks part # CE27820 4 foot long CE Smith Bunks part # CE27810 3 foot long CE Smith Bunks part # CE27800
view full answer... - Parts Needed to Add Bunk Boards to Boat TrailerTo add bunk boards you'll simply need the bunk boards and mounting brackets which attach to the front and rear crossmember of your trailer frame. If you already have brackets you may be able to use them, otherwise, you just need the correct length of boards and brackets: - CE Smith Carpeted Bunk Boards for Boat Trailers - 4' Long # CE27810, 5' Long # CE27820, 6' Long # CE27840, or 7' Long # CE27845 - CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" # CE10000G-4,...
view full answer... - What Brackets Needed to Install Bunks on Boat TrailerWe sure do, I'd recommend the # HP52FR bunk bracket and u-bolts like # CE15283GA-2. We also offer pre-carpeted bunks in various lengths, as part # CE27800 for a 3 foot, # CE27810 for a 4 foot, # CE27820 for a 5 foot, # CE27840 for a 6 foot and # CE27845. Or, you can provide your own boards and carpet them using bunk carpet like # CE11349.
view full answer... - Replacement Carpeted Bunk Boards for a Boat Trailer with 10 Foot Long Bunk BoardsFor bunk boards that are 10 feet long you could use a couple sets of the 5 foot long bunk boards, # CE27820. You would use one set of each 10 foot section needed. If brackets are needed you can use bolster bracket set # CE10000G-4. You will need at least 2 bracket per board.
view full answer... - Availability of 10 Bunk BoardsIf you are needing 10' lengths then you may be better off using 2 of the 5' long boards, part # CE27820. The longest bunk boards that we have are found as part # CE27845 and are 7' long so 2 of the 5' boards is the best solution.
view full answer... - Bunk Boards and Brackets That Allow for Angle AdjustmentTo adjust the angle of the bunk boards such as the 6' # CE27840, 5' # CE27820 or 4' # CE27810 you can simply use the Swivel Bracket Assemblies # CE10000G-4 which attach with U-Bolt Assembly # CE15283GA-4. The swivel brackets allow the bunk boards to tilt so they can accommodate boat hulls of different sizes.
view full answer... - Converting Boat Trailer from Roller Bunks to Carpeted BunksAll of the boat trailer bolster brackets we carry such as # CE10001G-4 are strong enough for general use so they do not carry specific weight ratings. These particular brackets are beefy 11-gauge galvanized steel. For bunks we offer carpeted lengths up to 6-feet. For your 20-foot boat four 5-foot bunks # CE27820 should do the trick. Keep in mind that if the trailer currently has roller bunks like # DL21741 switching to carpeted bunks will increase the drag/load on the trailer winch. You...
view full answer...
Do you have a question about this Boat Trailer Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video by:
Zack K
Edited by:
Frances L
Written by:
David L
Video Edited:
Jacob T
Video Edited:
Chris R
Installed by:
Cole B
Installed by:
Randy B
Updated by:
Wilson B
Updated by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Guy C.
2/7/2015
The bunks look brand new after a year of use.So far satisfied with my purchase.