Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Channel-style roller bunks upgrade your boat trailer's standard bunk boards, allowing for smooth loading and unloading and superior hull protection for your boat. Attach directly to bunk boards or use mounting brackets (sold separately).
Features:
Specs:
CE Smith's roller bunks convert your boat trailer's guide-ons from bunk board style to roller style. Instead of sliding on and off your trailer's bunk boards, your boat will smoothly roll. This not only simplifies the process of loading and unloading, but it also protects your boat's hull against scratches. Mounted in a rust-resistant galvanized steel channel, the durable rubber rollers absorb road shock during trailering.
Installation
The roller bunks are pre-assembled and can be mounted directly to your existing bunk boards (mounting hardware is sold separately). If you want to replace your bunk boards and attach the roller bunks to the front and rear crossmembers of your trailer frame, use a four-pack of swivel mounting brackets (CE10003G-4 - sold separately). These brackets allow you to install the roller bunks at different heights. In addition, the brackets enable the bunks to tilt to accommodate and support boat hulls of different sizes.
Galvanized Steel
Steel parts are galvanized by being hot-dipped in zinc after they have been stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (64 Customer Reviews)
Channel-style roller bunks upgrade your boat trailer's standard bunk boards, allowing for smooth loading and unloading and superior hull protection for your boat. Attach directly to bunk boards or use mounting brackets (sold separately).Great customer service and quick delivery. I have used etrailer for many things and have always had a good experience.
I ordered the 4' roller bunks and received them the next day
Installed them on wooden bunks. I pulled my boat this morning and can't believe how well they work. I wood install them again if I had another trailer I couldn't get my boat on with carpeted bunks. Thank you Tammie for helping me out.
rollers work great, I'm 85 years old and can now push my boat off the trailer with one hand. I fastened the rollers over top the wooden bunks.
Worked great on my 1967 runabout trailer. Used the original attachment hardware, as it was just the old rollers that were damaged. Arrived quickly and easy to install.
Well made and shipped quickly. Great customer service.
ETRAILER ships FAST! Rollers are on a galvanized frame with holes for mounting. ETRAILER and Smith also offer other mounting options. Rollers appear to be solid yet not so hard to mar fiberglass hulls.
Mounted a pair of these on the rear of a new Harbor Freight trailer and it has made loading and unloading my 10' Bass Raider boat a breeze. I'm a complete novice with this type of thing too, so it's saying a lot that I installed them with little effort or instructions to figure it out. Highly recommend. The product is well worth what it's priced at.
Great company to deal with. Excellent communication. Im a general contractor and appreciate when a company delivers the goods in more ways than one.
Added rollers to my dock to make loading and unloading easier. Shipment was timely and the price was competitive.
Well made and perfect for boat storage.
thank you for beings so fast you Guys are great thanks again
Thank you, etrailer.com for providing the solution to my problem in a fast, efficient, and effective way. I have a 12-foot long inflatable fishing boat that I carry on a utility trailer. Loading and unloading was taxing my 63-year-old body! These roller bunks fit perfectly on the 4' gate of the trailer and, with a small, inexpensive winch, loading and unloading my boat is now quick and easy. Although used in a way not traditionally intended, it is the perfect solution for me. Thanks again! I will definitely look to you again as future needs arise for creative solutions.
I love these roller bunks. Purchased two pairs of the four-foot size to mount on my floating dock to park my two Yamaha Waverunners on to keep them high and dry. They work and perform more than perfectly. I mounted each bank of rollers on a 2"x6" board for the required added clearance at 23" inches apart on center. Perfect. They can be rolled off easily by hand by one person, once marine grade grease(optional) was applied to each roller mechanism with a grease gun. Wipe them off, and there is no mess. I am actually going to mount another two pair on to a plywood spare removable platform on a general-use utility trailer, making it unecessary to purchase a usually poorly built purpose-built trailer. Nearly one year out in the open on the Florida Gulf Coast at the beach with zero rust to-date. Unheard of in these parts. Enough said. Thank you so very much for you help with such a fine product. J.P.
Low water levels made my board bunks usless, my boat loaded with minimal effort using these roller bunks. Thanks!
Lawrence R.
7/23/2019
Application is for a boat house carriage and even with higher water this year, the roller bunks continue to work great.
Got rollers took few hours to install had to take bunkers off drill holes once done reloaded boat with easy
Sure they will make loadin and unloading much easier . Thanks for great product its second pair I have install on boat trailer
John S.
10/24/2018
still in good working condition thanks for askin
Unless your boat's bottom is perfectly flat for the length of the rollers, these will have only a few points of contact and stress your hull. My hull is very slightly curved, which my bunks easily conformed to, but these rollers did not. And they didn't make it easier to push off the boat.
The personnel (specifically Lisa D) and customer service is excellent. I highly recommend CE Smith Roller Bunks and all of the products at etrailer.
Excellent,just what I needed.
I unloaded the boat,took the trailor back to my house and put them on in 30mins
Good on shipment time they arrived two days later
Clyde S.
11/19/2017
The bunk rollers still work great,just back down the ramp and the boats rolls off with ease
Installed the bunk rollers and they work great. Thanks for adjusting my order I really appreciate it.
They work great, be careful, boat will fly off trailer if not secured as the boat is launched into the water.
Rollers not only arrived as promised, the quality was beyond expectations. I’m so impressed that l’ll be forwarding pictures of the before, during, completion, and as a bonus, I may even attempt a launch and recovery video. Hopefully, all by the end of the week! Thank You
The product is exactly as advertised and cheaper than the other places we looked. Free shipping is also a plus. The roller bunks came within days and we are very pleased with the product and the company. This will be our first stop for any other parts we may need.
Purchased Roller Bunks for the boat trailer. My 18 ft. Sundance slides off with ease. These seem to be the most sturdy bolt on bunks on the market. Great price and super fast free shipping made it worthwhile shopping here.
Great product! I would recommend anyone use these rollers to replace their carpeted bunks.
I am very pleased with these rollers. The are build very strong and I am sure will last a long time. It has been a pleasure working with you. Another thing I really liked was the set up you gave me to track the shipment. It was the first time I've seen this, and it works so easy. I will sure plan on using you for anything else I need for my boat.
Thanks Gerry
Do you have a question about this Boat Trailer Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jerry J.
1/31/2023
After a year of using this product on my trailer, I recommend it even more. I unloadload my 10 Bass Raider boat easily with no assistance and with minimum effort thanks to these!