Dutton-Lainson Boat Trailer Parts - Roller and Bunk Parts - DL21755 Review Video

The roller bunks part #DL21754 are designed to fit on the end of a 2x4 board so the width of the channel is 1-1/2 inches.

Since your main concern is the marks on the hull of your boat I recommend going to the Yates TPR Ribbed Wobble Roller. These rollers are constructed of thermal-plasticized rubber which is a non-marking, non-scratching material. It is stronger and…

You definitely can replace your current 4 wobble rollers like part #CE29210 with the Boat Trailer Deluxe Roller Bunk #DL21740. These can be mounted on top of carpeted or wooden bunks as well as with brackets like the part #DL21742. I have attached a…

If you want to go to the next size up from a 5.30-12 tire you will need to look at 13 inch wheels and tires ST175/80-13. For a wheel and tire combo with 5 on 4-1/2 bolt pattern and radial tire use #AM31985. This tire will be 7 inches wide and 24.1…

The Boat Trailer Deluxe Roller Bunk - 5' Long - 12 Sets of 3 Rollers, item #DL21741, is rated for 3,000 pounds boat capacity.

I do have a photo of the Ark Ezi-Guides Self-Aligning Boat Trailer Loading System part #AR84FR installed which you can see below. This should give you a better idea of what is involved but it's not complicated at all. These work really well and…

The only way the roller bunks like #DL21741 could cause damage is if they were improperly positioned, installed, or the boat exceeded the 3,000 pound capacity. They may leave some marks on the boat from the black rollers but other than that you…

The Dutton-Lainson Boat Trailer Deluxe Roller Bunks 5 Feet Long Sections #DL21741 have a weight capacity of 3,000 pounds per set. As long as there is no more than 3,000 pounds on a single set of roller bunks, you can use the #DL21741 bunks for your…

The overall measurement from the top of the roller to the bottom of the U channel is 2-1/2 inches. I have provided a photo for you that shows the dimension you inquired about. I have linked you to a parts review video for the Roller Bunk #DL21741 you…

Since your trailer uses a combined wiring system where the stop and turn signals run on the same circuit, in order to add a third brake light to your trailer you would need to use a 2-Wire to 3-Wire Converter, like part #118158. This will convert the…

I spoke with my contact at Dutton-Lainson about storing your pontoon boat on the #DL21755 roller bunks. They said there is no problem with storing your boat on the roller bunks over the winter. The bunks have a weight capacity of 3,000 pounds, so as…

The CE Smith Roller Bunks for Boat Trailers part #CE27710 are 5' long so as long as these are close to the same length of the bunk boards you have on your trailer now they will work well for you. The CE Smith Roller Bunks for Boat Trailers are is…