CE Smith Spool Roller Assembly for Boat Trailers - Galvanized Steel and Black Rubber - 4"

They have almost everything you might need for trailers and products are always as advertised and with a speedy delivery! Will be used horizontally on my kayak trailer as a roller guide for lifting the kayak on and vertically on the tongue for keel support at the bow.1762096

by: Mike05/10/2019

I needed a roller on the back of my boat trailer so I could use a different style transom saver. No more bending down to remove a pin, my transom saver slides over the roller now. The roller assembly has done what I need it to do with no problems.
640564

Click to Enlarge

Quick delivery, good looking part. Fit and finish as expected. We will surely use e trailer again. Thanks1658769

Arrived quickly. Easy install and good Quality. 463937

Click to Enlarge

Harry J.

1/1/2019

This product works very well, still in good shape and was easy to install.

The end of the rod that held the roller on had snap on caps on each end and will likely come off at some point .
But will do for what need it for and it’s sturdy made.1538441

by: Rick B05/03/2017

This roller was exactly what I needed for my boat trailer and the price was right. Very well pleased with everything about dealing with your company and would buy from you again if and when I had the need. 375573

Eric B.

5/3/2018

Just great.

by: Waverunning fool05/06/2019

the bow stops on my Two Place Zieman trailer were not very well made, and had deteriorated to being out of service.

I s=installed these on the trailer and was back in business. Worked great and the trailer went back into use. Without these, it would not have been possible. Good deal on a good product. 638927

Quality product. I set it up on the rear of my boat trailer to accept the roller end of my transom saver (and as a boat guide for loading/off loading of course). Strong, sturdy roller for the transom saver application (500lb motor). The 4” roller is a perfect width/diameter to guide the boat on/off and hold my Extreme Max transom saver under load. Painted the galvanized bracket to match my trailer...good buy.980624

I had a hole drilled in the middle so I could mount it. This should solve the problem.654786

Click to Enlarge

by: Robert11/13/2018

Been using two of these rollers on my Kat, one for each hull. When on the trailer you need a roller as the trailer rolls along over bumps the hull goes up and down. The roller action prevents the stop from being ripped off. I also put SS keel guards to protect the fiberglass.582562

by: Dave B.06/16/2020

Great product, replaced the old rusted brackets, rails and plastic fenders with new galvanized brackets and fenders and beat up rails. 819817

These made a good alternative to the yellow ones which were out of stock. I use these to roll my inflatable up the ramps into my utility trailer or back of my pickup.1115808

great product for the price 1599714

Roller is as expected. Looked for a better main shaft for this because I don't trust the tap on caps at each end. No luck there yet. I added this to the rear of my new tandem boat trailer to have a place to put my transom saver on. Steel boxed trailer lights next, a under the front spare tire holder, then I will search for a boarding step for the front of the trailer. 573837

Both products came in today, fast delivery. I ordered a transom saver and a roller to attach to boat trailer. Not exactly sure if the roller will work but tired kneeling down to pin transom saver into place. I had to drill holes into the frame of trailer, hardest thing was finding bolts and nuts that would fit.815454

I ordered three of these rollers and they arrived quickly. They are definitely hight quality and made with heavy gauge steel. Although I'm not using them for their intended purpose (trailering), I am using them for easy-access/storage of large wood panels (table tops for when I use my shuffleboard table as a dining table). I recommend these and will return to etrailer.com for and future like needs.345134

Product is fine, but I did not realize until I opened the package that the roller was already attached to the bracket, so I had to remove one pal nut to enable me to affix the bracket to the trailer, my error... Next time I shall inquire more before buying. If components were loose it would have been snap to use in my trailer renovation.559795

I bought this roller to mount on my Jeep cargo brace to help slide my Kayak on the rack. This will work perfectly, good quality and is just as advertised.493938

This worked perfectly for my repair, how every I had a very hard time taking it apart the use the bolt hole on the bracket. It felt like the end caps where machined on, it would be helpful for this item to not be pre-assembly for installation purposes. Other wise a great product.721032

Great product. I’m happy. Only improvement I would say is to have the drilled hole either a little further apart or and oval shape so adjustments can be made. I just have to expand the holes outward to bolt around my Hobie trailer mast carrier for my winch line. Otherwise great product.1055658

I needed a roller assembly that a 2" wide belt on winch can ride in. This one has a thicker (3/16) bracket. Drilled 2 other holes so it can mount out on the end of my crane's 2" square tubing. I only gave it 4 stars because Smith left sharp edges/burrs all over the metal bracket.1161291

The holes on this did not line up with the existing holes on the trailer so I had to drill 2 new ones, which is not a big deal but I would prefer one without any existing holes if I have to put more in it. Other than that exactly what I needed and as far as I can tell it's a well made product and I would buy it again if I needed another one. Shipping through UPS surepost is the the worst, it sat in my town for an additional day for no reason because it had to get transferred to USPS then come to me the next day when I could have just gone to UPS and picked it up and had it.571662

Just what I needed and ordered. A nice, heavy duty roller for my boat trailer.1329567

by: Hunter 12/26/2019

good product, done what i needed it to do, which was for a transom saver to rest on to hold my motor. 734248

I was pleased at opening the container at finding the construction weight for the given application - it is sturdy! I was surprised that fastening bolts were not included which requires another store stop before installation can be done. When finished it will take up the slack and do just what I needed.221029