Review of Dutton-Lainson Boat Trailer Parts - Boat Trailer Roller Bunk Bracket - DL21762 Video

You can use roller bunks like the Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers #DL21741 instead of carpeted bunks on your 2012 Deep V Tracker boat without any marks or indentations. The roller bunks…

I recommend the CE Smith Bolster And Swivel Mounting Brackets, part #CE10000G-4. These are 9 inches long and have a swivel feature that enables you to tilt the bunks to the correct angle to fit the bottom of your boat. We also carry the mounting…

The Boat Trailer Roller Bunk Brackets #DL21742 do require 7/16" U-bolts such as #7163183UB. The bunk brackets are designed to be used with Roller Bunks #DL21740 or #DL21741.

First, you should put the size tires and wheels on the trailer that the trailer manufactures states. This information can be found on a sticker or plate on the trailer frame. Sometimes, a larger size can be used if there is space around the tire for…

I went out to the warehouse and pulled a roller bunk bracket #DL21742 to measure the slotted hole spacing for you. The slotted holes are 1-1/4 inches apart on center. I also made a short video showing this measurement for you.

The Dutton-Lainson Roller Bunk Bracket, part #DL21742, fits Dutton-Lainson Roller Bunks #DL21740 and DL21741. Four are needed to mount a pair of roller bunks. My contact at Dutton-Lainson advises that u-bolts are not specifically required to install…

Since the picture you submitted belongs to Karavan I can't post it here on our site, but if you check out the attached picture you can see how a very similar trailer had a set of rollers like the part #CE27710 installed. For a set of swivel…

To be able to mount roller bunks to your trailer and allow them to be angled to match the hull of your boat there are rollers and brackets that will work for you. You will need to use the Dutton-Lainson Boat Trailer Standard Roller Bunk, part…

The Dutton-Lainson Boat Trailer Standard Roller Bunk #DL21754 has a combined weight capacity of 2500 lbs. for both bunk rollers. They can be mounted right on top of wooden bunks. Also, if you 'd like to remove the wooden bunks that are likely on…

The Boat Trailer Standard Roller Bunk #DL21754 is going to add 3" of height to the 2'X8" vertical bunks that you have. We do have the Boat Trailer Roller Bunk Bracket #DL21762 that can be used if you feel that the rollers and bunks…

Best solution I can make for you would be to have some perpendicular cross beams welded (by a qualified welder), so that you can install the roller bunks part #DL21741 that you referenced like in the picture I attached. You will also need the install…

I have attached a picture that shows the dimensions of the CE Smith Spool Roller Assembly for Boat Trailers item #CE32100G. It measures 2-1/4-inches from the bottom of its mounting plate up to the center of the rubber roller. Overall width is…