Mounting Hardware for 7" Brake Assemblies

See what our Experts say about this Redline Accessories and Parts

• Replacement Brakes for 2006 Fleetwood Yuma Camper
  We do have replacement brakes for your 2006 Fleetwood Yuma Camper. Information is scarce on this camper but it looks like the gross vehicle weight rating is 2,440 lbs. Based on this information and the design I'm guessing you have 2,200 lb axles. Whether it is 2,000 lb or 2,200 lb won't make a difference for a replacement. At most you have a 3,500 lb axle, I recommend verifying by checking the axle tag. If no information is listed on the axle tag you can measure your existing drums. If...
  view full answer...
• Adding Electric Brakes to a 2,100 lbs Axle
  To add electric brakes to your 2,100 lb axle you will need the Electric Trailer Brake Kit # AKEBRK-2. This comes with left and right hand assemblies that are 7" diameter x 1-1/4" wide, fit 12" wheels and have a 4 bolt mounting flange pattern. You will also need mounting hardware # BRKH7 to complete the installation, and a brake adjustment spoon # W80630. The only other thing you will need is a brake controller and the wiring that goes with it. I have added a link to our page with our selection...
  view full answer...
• Hub and Drum and Brakes for Trailer With 2,000 lb Axles & Bearings L44649
  Thanks for that great information we have exactly what you need for your 2,000 lb axles. The number you gave of 1.063 inches in diameter where your bearings ride on the spindle corresponds to Bearing # L44649. Knowing that, we can get you the correct hub and drum, which is the Trailer Hub and Drum Assembly - 2K Axles # AKHD-545-2-2K. These hub and drums work with 7" brake assemblies and for hydraulic brakes the correct assembly is the Dexter Hydraulic Trailer Brake Kit # 23-398-399. These...
  view full answer...
• Recommended Dexter Brake Kit for 2500 lbs Dexter Axle
  For your 2500 lbs Dexter Axle you will want the Dexter Hydraulic Trailer Brake Kit # 23-398-399. These brake assemblies measure 7 inch x 1-3/4 inch, mount to a 4 bolt mounting flange, and are compatible with 10 inch, 12 inch, and 13 inch wheels. I have attached a review video that you can check out for more information. If your brakes are 10 inches x 2-1/4 inches, if you could let me know whether you have electric or hydraulic brakes I can look into those options as well. If you need...
  view full answer...
• Recommended Trailer Brake Assembly for Flexride BD75450
  The BD 75450 crosses over to the Dexter # 8-257-5UC3 7 inch hub/drum you'd looked at. The etrailer brand # AKEBRK-2 would be a compatible replacement for your existing brake assemblies. Mounting hardware isn't included. If you don't wish to reuse the existing brake assembly mounting hardware, we offer replacement hardware as part # BRKH7, which provides hardware to install 2 brake assemblies. You'll also want to closely examine the armature surface of the drum that the brake magnets ride...
  view full answer...
• Brake Controller Recommendation for 2010 Mini Cooper Clubman With 7-Way
  Since you already have the 7-way on your 2010 Mini Cooper Clubman, you will only need the brake controller, and they are universal to all electric trailer brakes. For the brake controller my favorite option and the one I highly recommend is the Brake EVN # TK63VR. I love the I-Command because it is a great value due to its unique combination of quality and cost-effectiveness. The I-Command is going to give you smooth braking, is easy to use, and has a bright display that is simple to read...
  view full answer...
• Can Motorcycle Use Curt Echo Trailer Brake Controller
  So long as your motorcycle has a 7-way, you can use the Curt Echo Wireless Trailer Brake Controller # C51180. If your motorcycle has a 4-way already but not a 7-way you can simply add the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation # ETBC7L.
  view full answer...
• Changing From Hydraulic to Electric Trailer Brakes on Trailer With 2,000 lb Axle
  I took a look at the specs of your 1998 Jayco Eagle 12UDST, and it looks like this is a single axle trailer with a 2,000 lb axle. That means you likely have a 7" hub and drum like the Dexter Hub and Drum Assembly # 8-257-5UC3-EZ, though you will want to confirm that by measuring the inside diameter of the hub. If you do have a 7" hub and drum, as well as a 4-bolt mounting flange like # 4-34, the correct electric brakes are the Electric Trailer Brake Kit - 7" - Left and Right Hand Assemblies...
  view full answer...
• How do I Correctly Measure Drum Brakes?
  When measuring the brake drum, you measure the interior diameter on the drum. I have attached a photo to help during the measuring process. If your brakes are 7 inches part # AKEBRK-2 works for your application. You also need hardware part # BRKH7 If your brakes are 10 inches part # AKEBRK-35-SA works for your application. You also need hardware part # BRKH10B If your brakes are 12 inches part # AKEBRK-7-SA works for your application. You also need hardware part # BRKH12
  view full answer...
  
• Brake Assemblies and Hub Assemblies for 2,000 lb Trailer Axle
  The Trailer Hub and Drum Assembly - 2,000-lb E-Z Lube Axles # AKHD-545-2-EZ-2K is only available as an independent part and is not available in a kit or pack. You will simply need to add the part to your cart selecting the quantity of 4. If you don't have the brake assemblies, you can use the Electric Trailer Brake Kit - 7" - Left and Right Hand Assemblies - 2,000 lbs # AKEBRK-2. You will just need 2 kits for your 4 hub assemblies. Then you will use two hardware kits # BRKH7 and wiring...
  view full answer...
• Can 7" Hydraulic Brakes Be Replaced With Electric Brakes?
  The Electric Trailer Brake Kit # AKEBRK-2 is designed to fit a Flange # 4-34 which spaces the mounting holes 2-7/8" on center. As these are within 1/8" of the dimensions you listed I recommend rechecking the measurements for verification. I do not recommend drilling out the holes to increase the size as this could weaken the flange and cause another issues. Instead if your holes are a different pattern you can replace your flanges for the correct size flange. I recommend using new Mounting...
  view full answer...
• What Hardware Needed to Mount 7-Inch Trailer Brake Assembly
  The nuts and lock washers needed to install a 7 inch brake assembly to the brake mounting flange is part # BRKH7 which includes enough hardware for 2 brake assemblies. I'm not certain what you mean by 'drum without a hub'. If you're talking electric drum brakes, the 7 inch hub drums we offer are one integrated piece like # AKHD-545-2-2K which uses the L44649 inner/outer bearing or # AKHD-545-2-1K which is compatible with the L44643 inner/outer bearing. If instead you meant to say you...
  view full answer...
• Replacement Electric Trailer Brakes For 2,000 lb Axle
  Thanks for that info, and based on the measurements you gave, there are 2,000 lb electric brakes that will work for you and fit your brake mounting flange: - Electric Trailer Brake Kit - 7" - Left and Right Hand Assemblies - 2,000 lbs # AKEBRK-2 These will fit a 2,000 lb hub and drum, and to install them you need the Mounting Hardware for 7" Brake Assemblies # BRKH7. You will also need - if you don't have one - an adjustment spoon, the Brake Adjustment Spoon for Drum Brakes # W80630....
  view full answer...
• What Comes With etrailer 7" Electric Trailer Brake Kit
  The Electric Trailer Brake Kit - 7" - Left and Right Hand Assemblies - 2,000 lbs # AKEBRK-2 only includes the left and right hand brake assemblies. These are designed to fit 7" x 1-1/4" drums. If you need mounting hardware you would need the Mounting Hardware for 7" Brake Assemblies # BRKH7.
  view full answer...
• Recommended Least Expensive Brakes For 2000 lb 2-Jetski Trailer
  For your 2 jetski trailer, the least expensive way to add brakes is an electric brake. To do this, I recommend adding the Electric Trailer Brake Kit - 7" - Left and Right Hand Assemblies - 2,000 lbs # AKEBRK-2. This will mount to your axle flange using hardware # BRKH7. You will need a brake adjustment tool like # W80630 for this installation and maintenance. For your hubs, if you have 4 on 4 inch bolt pattern wheels, you will need # 8-276-5. If you have 5 on 4-1/2 inch bolt pattern...
  view full answer...
• Parts Needed to Add Electric Drum Brakes to Trailer
  The linked article gives you a recap of what is needed to add brakes to a trailer. Since your trailer's 2200-lb axle already has brake flanges installed, adding brakes to it will require you to select left- and right-hand brake assemblies and hubs/drums to replace your idler hubs. The new hubs have to use the same inner and outer bearing as your old hubs to ensure they will fit on your existing spindles. Check the mounting bolt pattern on the flanges to ensure they match the 4-bolt pattern...
  view full answer...
• Parts Needed to Convert from Hydraulic to Electric Brakes on a 1995 Jayco Pop Up Trailer
  We have everything you need. Since you already have brakes then you already have hub and drums. If you need new hubs let me know your bolt pattern and inner and outer bearing numbers and I'll recommend the correct parts. You're going to need to wire the trailer to power the brakes. This will require to have a 7-way connector if it doesn't already have one, like # HS381-9000. It's attached to a junction box to make wiring everything easier. You'll also need ring terminals, # 44-5310A,...
  view full answer...
• Replacement Trailer Brakes For 2000 Damon Camplite Pop-Up Camper With AL-KO 8440 7" Drum Brakes
  Your AL-KO 8440 drum tells me you have a 7" brake drum with a 5 on 4-1/2" bolt pattern. This will need 4 of the Easy Grease Trailer Hub and Drum Assembly # AKHD-545-2-EZ-2K if you are needing to replace the drums themselves. For the brake assemblies you will need 2 of the Brake Kits # AKEBRK-2. We do have the Mounting Hardware # BRKH7 for the brake assemblies as your hardware may not be in the best condition with the age of the 2000 Damon Camplite pop up camper. We have 12 Gauge Wire...
  view full answer...
• Recommended Components To Add Electric Brakes To 1997 Coleman Destiny Pop-Up Camper
  It looks like you have really been spending some time putting together the components you need to install electric brakes on your camper. The # AKHD-545-2-2K hub and drum will work on your camper but you will need to replace the 10-9 seals included with the kit with # 13194 seals. The brakes you mentioned, # AKEBRK-2 will work great with the hub and drum. Since you said you have a 4-bolt brake flange the # BRKH7 brake mounting hardware will also work for you. The breakaway kit I...
  view full answer...
  
• Does 7" Electric Trailer Brake Kit Need to be Greased
  The 7" Electric Trailer Brake Kit # AKEBRK-2 is ready to be installed once you receive them - no greasing is required. Trailer hub and drum assemblies are typically the pieces that need grease - if you were to add grease inside the hub assembly where the brake pads are then you run the risk of grease getting on the brakes which will affect their performance. If you're also needing the hub and drum assembly then the kit # AKHD-545-2-EZ-2K is what you need - this does come pre-greased and...
  view full answer...
• Trailer Axle That is 60" Hub Face to Hub Face With Hub and Drum and Brakes
  There are trailer axle that have a 60" hub face to hub face measurement, as well as a hub and drum that will work, but none with a 6 on 5-1/2" bolt pattern. That bolt pattern is only for larger capacity axles/hubs so the largest available for this axle, which has a 2,000 lb rating, is a 5 on 4-1/2" bolt pattern. What you need would be the following: - Dexter Trailer Axle Beam with Standard Spindles - 60" Long - 2,000 lbs # T20BTR-6048 - Brake Mounting Flange for 1-3/4" Round Trailer Axles...
  view full answer...
• Do 14 Inch Wheels Work With 7 Inch Dexter Electric Trailer Brake Kit
  So long as the hubs you are using are able to fit a 14 inch wheel, then the Dexter Electric Trailer Brake Kit - 7" - Left and Right Hand Assemblies - 2,000 lbs # 23-47-48 will work. It isn't the brakes that are incompatible with wheels, it is really that usually hubs will not be able to support larger wheels, and these brakes are going to mostly work with 10", 12", and 13" wheels. You will also need Mounting Hardware for 7" Brake Assemblies # BRKH7 with these brakes. I have added a link...
  view full answer...
• Replacement 7 inch Brake Assembly for Fiat Elnagh 320 Motorhome
  Buongiorno! We do carry Replacement Magnet Kit for 7" Electric Trailer Brake Assemblies - 2,000 lbs Item # AKBRKR-M7. However, it looks like the center mounting hole on yours is round, whereas ours uses a square/rectangular hole. It doesn't appear that the hole on the # AKBRKR-M7 is large enough to allow the arm (on the brake assembly) to fit through. If you scroll to about the 5:40 min mark on the Redline Replacement Magnet Kit video Iinked below, you'll see the arm I'm referring to...
  view full answer...
  
• Electric Brakes & Bearings For Livin Lite Quicksilver 6.0 Camper Trailer
  That is fantastic information, much appreciated, and based on that we have exactly what you need for electric brakes and bearings for your Livin Lite Quicksilver 6.0. The 8-257 is the Dexter Trailer Hub and Drum Assembly for 2,000-lb Axles - 7" - 5 on 4-1/2 # 8-257-5UC3, and the 023-048 are 7 inch brakes, so here is exactly what you'll need: - Electric Trailer Brake Kit - 7" - Left and Right Hand Assemblies - 2,000 lbs # AKEBRK-2 - Mounting Hardware for 7" Brake Assemblies # BRKH7 -...
  view full answer...

Do you have a question about this Accessories and Part?