How do I Correctly Measure Drum Brakes?

Question

Question:

I want to know what I need to measure to get the correct brake system for my trailer. Do I measure the inside width of the brake drum and the diameter of the drum? Thank you.

asked by: Aaron L

0

Expert Reply:

When measuring the brake drum, you measure the interior diameter on the drum.

I have attached a photo to help during the measuring process.

If your brakes are 7 inches part # AKEBRK-2 works for your application. You also need hardware part # BRKH7

If your brakes are 10 inches part # AKEBRK-35-SA works for your application. You also need hardware part # BRKH10B

If your brakes are 12 inches part # AKEBRK-7-SA works for your application. You also need hardware part # BRKH12

expert reply by: Clayton O

0

click to enlarge

Answer 1

The correct torque specs for lug nuts will depend on certain variables such as wheel size, wheel material, stud size, and stud type. The most common torque spec for trailers is around 90-100 ft. lbs. I have attached our wheel nut torque…

view full answer...

Answer 2

Yes, there is a measurement you can take to determine what size brakes you need and if they will fit your existing drums. You will want to measure the diameter of your drums. I have included a diagram detailing the dimensions you will need to find.…

view full answer...

Answer 3

The Timbren Axle-Less Trailer Suspension #ASR2KHDS09 you're looking at is actually not going to work with your trailer tires since this kit is only going to work with trailer wheels that are 16" or larger. So, instead I'd recommend going…

view full answer...

Answer 4

I attached a picture of a 4-bolt mounting flange like what the brake assembly part #AKEBRK-2 you referenced is designed to attach to. This is a standard dimension so I would be shocked if the flange on yours was different.

view full answer...

Answer 5

You will need several items to add electric brakes to your Carry-On Utility trailer. Starting with the trailer you will need a hub and drum that matches the bearings and seal on your trailer spindle and your wheel bolt pattern. The only way to be…

view full answer...

Answer 6

The Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights - Non-Binding - RV Mount - 8,000 lbs Item #RM-676 weighs right at 47 pounds.

view full answer...

Answer 7

Yes, the Progressive Dynamics part #PD9260C will work great as a replacement for the Magnetek 900 series model 950 that you have currently.

view full answer...

Answer 8

We have an option to replace the torsion axle on your 1996 Triton snowmobile trailer, but do not carry any torsion axles. Instead, the best option we have is a Timbren Axle-Less trailer suspension system which are simply bolted or welded so you do…

view full answer...

Answer 9

We actually have a variety of brake components here at etrailer.com that I have linked for you to filter through. Usually what we see is that it's more cost-effective to replace the entire brake assembly instead of piecing it out plus you know…

view full answer...