Replacement 7 inch Brake Assembly for Fiat Elnagh 320 Motorhome
Question:
What is the wheelbase of the four bolts that lock the electric brakes? What is the function of the brake mounting flange for round trailer axles 1-3 / 4 "- 2K sold separately? Best regards.
asked by: Sergio C
Expert Reply:
Buongiorno!
We do carry Replacement Magnet Kit for 7" Electric Trailer Brake Assemblies - 2,000 lbs
Item # AKBRKR-M7. However, it looks like the center mounting hole on yours is round, whereas ours uses a square/rectangular hole. It doesn't appear that the hole on the # AKBRKR-M7 is large enough to allow the arm (on the brake assembly) to fit through.
If you scroll to about the 5:40 min mark on the Redline Replacement Magnet Kit video Iinked below, you'll see the arm I'm referring to that's on the brake assembly, into which the magnet clips. This is on a larger size axle, but the process is the same.
You may be able to use the Electric Trailer Brake Kit # AKEBRK-2 (individual brake assemblies are not available). This kit includes a pair of 7 inch diameter by 1-1/4 inch wide brake assemblies and are designed for use with 2,000 lb axles and fit 10 to 13 inch wheels. These mount on a 4-bolt mounting flange, like # 4-34. The mounting bolts are included but the nuts and lock washers # BRKH7, are sold separately.
I've also included an installation video for these brake assemblies for you to check out.
Products Referenced in This Question
Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 7 Inch
- 1-3/4 Inch Diameter Axle
- Redline
more information >
Replacement Magnet Kit for 7" Electric Trailer Brake Assemblies - 2,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- 2000 lbs
- Brake Magnets
- 7 Inch
- etrailer
more information >
etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- 2000 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- etrailer
more information >
Mounting Hardware for 7" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 7 Inch
- Redline
more information >
Product Page this Question was Asked From
Dexter Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Continue Researching
- Q&A: Replacement Dexter Brake Assemblies for 36-19 Assemblies
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Dexter Trailer Brake Kit To Replace Dexter 36-19 Brake Assemblies
- Q&A: Replacement Hub and Brake Assemblies that Fit Sure Trac 3,500 lb Axle
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Recommended Wet Bolt For Center Hole Of The CRE 3000 Equalizer
- Q&A: Replacement Bolt and Nut for MORryde Wet Bolt Kit part # MR46ZR
- Q&A: Replacement Hub for a Lippert LCI 126003 Hub
- Q&A: How to Initially Adjust the Dexter Nev-R-Adjust Electric Trailer Brakes
- Article: Trailer Tire Sizing
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Choose the Right Trailer Hitch Class
Sergio
1/16/2020
What is the wheelbase of the four bolts that lock the electric brakes? What is the function of the brake mounting flange for round trailer axles 1-3 / 4 "- 2K sold separately? Best regards.