Dexter Electric Trailer Brake Assembly w/ Parking Brake - 7" - Right Hand - 2,200 lbs

Video Transcript for Dexter Axle Trailer Brakes K23-104-00 Review

Speaker 1: Today we're taking a look at the Dexter Electric Trailer Brake Assembly, with the included parking brake. This electric brake assembly is much easier to install and offers more user control when compared to hydraulic brakes. It requires only an electric brake controller, which is sold separately, so there's no actuator or hydraulic lines necessary.Located right here is the manual parking brake lever, which is included. It also comes with the adjuster plug, which covers the access hole to keep dirt and grime out of the assembly and off of the shoes.Mounting bolts or studs and nuts are included, so hardware's included. It also comes with installation instructions to help walk you through that process step by step. The product is made in the USA and is designed to fit most standard hub and drum assemblies, including Dexter, Lippert an AL-KO.

This is for the right hand, or passenger's side, of your trailer.When it comes to the dimensions, the diameter is measured from edge of this shoe to edge of this shoe, going straight across. That's gonna give us a measurement of seven inches. The width is the measurement of the actual pad right here, and that's an inch and a quarter. So, seven-inch diameter, about an inch-and-a-quarter wide.The mounting flange bolt pattern is a four-bolt design. Again, hardware is included.

This is designed to fit wheel sizes of 10-inch, 12-inch, and 13 inches. It's designed to fit an axle with an axle rating of 2,200 pounds.That's gonna do it for today's look at the Dexter Electric Trailer Brake Assembly with the parking brake lever.