Washer For 1" Spindle
(266 reviews)
Price: $4.95
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (266)
- Q & A (0)
- Videos (1)
- Photos
TruRyde Accessories and Parts - SW1000
- Trailer Spindles
- Spindle Washer
- TruRyde
- 1 Inch I.D.
Replacement washer is designed for use with 1" diameter spindles.
Features:
- Replacement washer is designed for use with 1" diameter spindles
Specs:
- Overall diameter: 1.658"
- Inner diameter: 1.01"
- Thickness: 0.121"
FA-SW100 TruRyde Washer
Video of Washer For 1" Spindle
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of TruRyde Washer For 1 Inch Spindle - SW1000
Hi everybody, Andy here with etrailer.com, and today we're gonna take a real quick look at this washer for your one-inch spindle. This replacement washer is designed for use with one inch in diameter spindles. And on your screen, I am putting up a diagram that I think will prove helpful for you, in case there we're some other minute measurements that you we're needing. You can also find this diagram on this product page if you need to refer back to it. But if you are in need of a washer for your one-inch spindle, this is going to be what you need if it meets those other specifications that you are looking for. Well, that's gonna conclude our brief look today.
I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Alternate product found
Customer Reviews
Washer For 1" Spindle - SW1000
Average Customer Rating: 4.8 out of 5 stars (265 Customer Reviews)
Replacement washer is designed for use with 1" diameter spindles.by: Warren03/17/2024
perfect replacement
by: Jeffrey08/10/2023
The original bearing savers, they are easy to install and paired with the Bearing Buddy bearing seals they are a reliable way to protect your boat trailer wheel bearings.
by: Glenn11/22/2023
The tech helped me to find this item. Thank you for knowledgeable people. One little part missing can stop everything. Well done
by: Carl12/14/2022
The products appear to be ok. I would give the products 4 out of 5 stars. The 2 star rating is because of the poor shipping.
I ordered 2 leaf springs, 2 spindle nuts and 3 spindle washers. The first box showed up quickly (3 days) but it only contained 1 leaf spring. I called etrailer and they shipped a second leaf spring. After 5 days the package was at my local UPS distribution center but the tracking info said the package had been damaged and ups was contacting the shipper. I found out from ups that the spring had come out of the box, and they did not know who to deliver the spring to. I called etrailer again to discuss the damaged package but etrailer would not ship another spring until the damaged box/loose spring mystery was solved. Another week passed. I finally got the second leaf spring today, but it took about 3 weeks from the initial order date.
by: Adrianne02/26/2023
I bought these because on my original hubs, there was no washer behind the castle nut. But I didn't end up using them, because when I added them, there wasn't room to get the cotter pin through the hole. I read several comments saying you must have a washer under the castle nut, so I was worried about this. But then I read several other comments in which people said their 2000 lb. axle hubs came pre-assembled with no washers, it's just the way some of them are designed, and there isn't any room to add one.
by: James10/10/2023
Haven’t had any problems!
by: Ross05/18/2022
Replaced the old electric brakes on my 1984 Gore Trailer and these fit perfect. The bearings and oil seal included in Part BK2-100 we’re also a perfect match!
by: Tim 05/06/2023
Exact as described.should work perfect on handle of sword I am making.
by: Casey 11/08/2023
Perfect fit
by: The R08/15/2023
Exactly the right fit. Thanks Tiffany!
by: Mary J08/05/2023
Your the best
by: Gary06/29/2016
I ordered more than a spindle washer, and the shipping fees and quick service is much appreciated. when I replaced the bearings on my trailer wheels, I inadvertently put the spindles in the wheel backwards. (Dummy...LOL) Thus, I needed new grease seals and as long as I was doing it right decided to put new washers and cotter pins in as well.
by: Alfred12/19/2021
Appreciate the prompt service but I guess I messed up on my order. I got two bearings that were the same size. My hub has a bigger inner bearing and seal.
by: Rodney S.05/31/2018
I ordered these washers from a Highly Trusted Company and from previous experience in ordering other items from them. Their communications during the Processing of this order was prompt, efficient, and consistent. I needed these washers for the axles on my yard cart (going from large wheels to smaller wheels) and because I could not find them at any Hardware/Home Stores in my area. I definitely recommend etrailer.com for solving all your parts problems.
by: Jay 07/07/2023
The tech/sales people are very knowledgeable and delivery was quick!
by: Dan08/22/2017
Received the washers today. I now have the washers and dust caps and can refurbish the hubs and wheels on my 4 wheel car hauler. Turnaround time has been very good on the parts ordered and the quality is excellent !! I now have new backing plates, brake assemblies and wiring for this trailer. I appreciate the quality of your products and the promptness of your shipping.
by: 1 Spindle Bearing Kit01/08/2016
Excellently made and came with quick shipping. Better than expected!
by: Tim 08/02/2020
Easy trailer repair with enclosed instructions for this non-mechanic. Quickly delivered and now I’m back on the water. Bought hub kit including hub, bearings, seal, and lug nuts. Also bought new washer and cotter pin.
by: Keith07/12/2020
I’m so happy I found etrailer.com! I’m rehabilitating an ole faithful trailer with new hubs and tires...
Their product descriptions are spot on. The video’s included in the photo gallery tells you everything you need to know as well. Very informative. Can’t go wrong.
I’m hearing disabled, so I like to shop without calling and struggling through a conversation, and their website is so informative you can find what you need!
by: James07/17/2021
Replacement trailer rollers and parts were exactly as described and arrived as scheduled. I would order again as needed
by: Kevin04/06/2013
Solid washer, 1/8" thickness. I used as roller washers. They are a little less outside diameter than designated "roller washers", but I needed the 1" inside diameter which ETrailer didn't have in a roller washer. These actually fit my roller BETTER because of the slightly smaller outside diameter and have more than enough coverage against the hog rings.
Thanks for a great site and the phone assistance.
by: Dave S.05/07/2017
Haven't installed the brake magnet yet but looks to be an exact match to the old one. As for the seals I ordered, I learned not to trust my owners manual. It listed a part number to get for seal replacement so I ordered them and etrailer delivered them very efficiently only to find out the i.d. was not a fit. I should have checked the dimensions before ordering. I have found other discrepancies in my Aliner manual so it's not to be relied on. Thanks for fast service, etrailer.
by: Adirondack Fred04/30/2017
I'm a first timer to Etrailer. They do an excellent job on their web site explaining their products. The products I received seem to be fine , although I haven't got to actually test them yet. I will be back when I need anything for my trailers.
by: James Thomas07/28/2019
Very friendly service people. I needed help with an order that I placed and the service person took care of it right away. The shipping was fast . The products that order were good quality products. I would buy from etrailer again.
by: Matt W10/05/2017
I bought a 40 year old sled trailer and it was missing the spindle washers when I pulled the hubs off. These fit just fine.
25
266
Show More Reviews
See what our Experts say about this TruRyde Accessories and Parts
- How To Fix the Cotter Pin Not Catching the Ears On Spindle Nut For a Boat TrailerI do have an option for you but I do not recommend drilling a hole into your spindle in order for the cotter pin to catch the shroud on your spindle nut. I would first make sure you have the washer installed behind the spindle nut between that and the outer bearing. If you do then it might just be easiest to install more washers, part # SW1000 until the gap is filled. There is also the option of obtaining a longer spindle nut at your local hardware store which might be a better option for...
view full answer...
- Where Does Flat Washer GoI was unable to find an order number so I'm not certain exactly what you are referring to, but in general a flat washer such as Washer For 1" Spindle # SW1000 will go between the outer bearing of your hub and the nut that holds it on, which essentially works to protect the bearing. These washers are used on spindles with a spindle nut such as Spindle Nut 1" # 165686 and Cotter Pin # 165649.
view full answer... - Do I Need a Washer with Castle Nut to Install Dexter Trailer Idler Hub Assembly for 2,000-lb AxlesPersonally, I would install the Dexter Trailer Idler Hub Assembly for 2,000-lb Axles # 8-91-05UC1 and add the Washer # SW1000, Spindle Nut # 165686, and Cotter Pin # 165649 as that's how we usually install them here at etrailer and it makes sense to me to have that smooth surface between the castle nut and bearing. If you spoke with Dexter directly and they said that the washer isn't needed then you should be just fine without it, I just feel like it will keep everything running a bit...
view full answer... - Spindle Washers for Dexter Trailer Axle with Idler HubsYes, spindle washers are to be used except in a rare occasion where they will not fit. However, the Dexter Trailer Axle with Idler Hubs # 20440I-ST-72 does not come with washer. You will need part # SW1000.
view full answer... - Recommended Castle Nut for Dexter Trailer Axle Beam # T3584F-EZ-8974The spindle on your Dexter Trailer Axle Beam # T3584F-EZ-8974 will use a 1 inch castle nut with 14 threads per inch like the TruRyde # 165686. Then for a washer you can use # SW1000 and for the cotter pin you will need # 165649.
view full answer... - Washer For 1 Inch Spindle Bearing Kit BK1-100A normal washer will indeed suffice, and it looks like you are using the Bearing Kit for 1" BT8 Spindle # BK1-100. So all you need is the Washer For 1" Spindle # SW1000.
view full answer... - Replacing A Castle Nut On An Axle Rated For 2,500 LbsIt appears you need a spindle nut. We have a couple of options for you to work with your 2,500 lbs axle: The Trailer Spindle Nut 1", part, # 165686 and the Washer For 1", part # SW1000 Replacement Trailer Spindle Jam Nut, part # 6-191 and the Replacement Nut Retainer for 6-191 Jam Nut, part # 6-190 They each have 14 threads per inch and work with axles with 1" spindles. Each spindle nut needs either a washer or a nut retainer. If your spindle uses a cotter pin, you will need the first...
view full answer... - The Washer from TruRyde Bearing Kit # BK1-150 Does not Fit on the SpindleThe tang washer included with the TruRyde Bearing Kit, # BK1-150, was designed to work with EZ Lube spindles. Easy lube spindles have a flattened portion on the threads (see photo) so they can use a tang washer to hold the nut in place. Non-EZ Lube spindles will have a hole through the threads and use a cotter pin to hold the nut in place, rather than a tang washer. If your spindle does not have a flattened section on the threads, but has the grease fitting on the end, then you may have...
view full answer...
- Correct Replacement Castle Nut, Cotter Pin, and Washer for Trailer with 1" Round SpindleThe correct replacement castle nut, cotter pin, and washer for a trailer with 1" round spindle is as follows: Castle Nut part # 165686, Cotter Pin part # 165649, and Washer part # SW1000. Unfortunately, we can't cross-reference trailer mfg. part numbers but the above parts are fairly standardized so there will be no issues with compatibility.
view full answer... - Spindle Washer to Fit 1 Inch Diameter SpindleThe Washer For 1" Spindle # SW1000 will absolutely work with your spindle as it has a 1" inner diameter.
view full answer... - Wobble Roller, Hog Ring and Washer for an EZ Loader Boat TrailerThe Yates Ribbed Wobble Roller, # YR500YW-8PEZ, is exactly what you need for your 1999 EZ Loader boat trailer. The bushings are included with this roller. For a hog ring, we offer part # CE10981 and you can use part # SW1000 for a washer. At this time, we do not have wobble roller sets or kits that fit a 1 inch shaft.
view full answer... - Should There Be a Washer on Trailer Spindle Between Spindle Nut and Outer BearingThere really should be a flat washer between the outer bearing of your hub and the nut that holds it on. The washer protects the back side of the bearing from the edges and points on the back side of the spindle nut. The Washer For 1 inch Spindle, # SW1000, is typically used on spindles that have a castle nut, like # 165686, and a cotter pin, # 165649. A D washer, # 5-23, would be used on a spindle that has a flat side and uses the same castle nut and cotter pin setup. A Tongue Washer,...
view full answer... - Replacement Spindle Washer, Castle Nut and Cotter Pin for Dexter SpindleThe linked page displays all the trailer spindles we offer and specs including weight capacity and thread diameter. All spindles we offer have a 1-inch-diameter threaded portion that accepts a spindle washer like # SW1000 and a castle nut like # 165686. For a cotter pin you can use # 165649.
view full answer... - How To Use Bearing Kit for #84 Spindle with Round SpindleIn regards to the Bearing Kit for #84 Spindle part # BK2-100, if you have a round spindle you'd simply reuse the flat washer and spindle nut that was already on the axle. If you need them we do offer them as the Trailer Spindle Nut part # 165686, the Washer part # SW1000, and Cotter Pin part # 165649.
view full answer... - Washer Needed to Install Dexter Trailer Idler Hub Assembly for 2,000-lb AxlesIf the Dexter Trailer Idler Hub Assembly for 2,000-lb Axles # 8-91-05UC1 is what fits your axle/spindle then you can use the Spindle Nut Kit for EZ Lube Axles # RG05-100 for an EZ Lube spindle or parts # SW1000, # 6-190, and # 165686 for a standard spindle.
view full answer... - Should There Be a Washer Between Outer Bearing and Castle Nut on etrailer 2,000 lb Trailer AxleIt is not required to install a washer between the outer bearing and the castle nut on the Trailer Idler Axle Beam with Easy Grease Spindles part # e48GR. That said, it's not a bad idea to use one and I recommend this to ensure there is no damage to the outer bearing. For this, we have the Washer For 1" Spindle part # SW1000.
view full answer... - Trailer Spindle Washer with 1 Inch Inner DiameterDexter Tang Washer # 5-59 has an inner diameter of 1-3/4 inches. We do have several washer styles with 1 inch diameters though: # 5-101 # 5-57 # 5-23 # SW1000 # 165863
view full answer... - Washer Recommendation to Prevent Play of Hub on SpindleThere should be a washer of some type between the spindle nut and the bearing on your trailer. The washer protects the back side of the bearing from the edges and points on the back side of the spindle nut. This is probably why you have a bit of play on your hub. There are several types of spindle washers available depending on the spindle configuration on your trailer. The Washer For 1 inch Spindle, # SW1000, is typically used on spindles that have a castle nut, like # 165686, and a...
view full answer... - Does a Washer go Between the Outside Bearing and the Axle Nut?Yes there should be a thrust bearing/washer between the outer bearing and the nut that goes on to protect the bearing. What you want is Washer For 1" Spindle part # SW1000. This will replace the missing one and get you back on the road. Keep in mind this is for the very common 1" spindle diameter which is what the hub you looked at uses if you have a different size than this let me know.
view full answer... - Correct Hub and Washer Replacement for 1" Trailer SpindleThe correct idler hub for a 1" spindle is the Dexter Trailer Idler Hub Assembly part # 34822545BX. These will be used with a washer between the castle nut and outer bearing as should all trailer hubs. There isn't any one hub that's designed to be used with/without them, they should all be used with a washer. If you need a washer then you can use part # SW1000.
view full answer... - Replacement Galvanized Trailer Idler Hub For a Continental EC39 Boat TrailerYour Continental EC-39 Boat Trailer will need a Trailer Idler Hub Assembly # AKIHUB-545-2-G-2K. I was able to confirm with Continental that you have a spindle that uses 1.063" bearings on a straight spindle with a 1.249" ID grease seal. You will need to replace the grease seal that comes with the kit with a Double Lip Grease Seal # 34823. If your Cotter Pin # 165649, Washer # SW1000, or Spindle Nut # 165686 are damaged or missing we have those items available for replacement as well....
view full answer... - Replacement for Missing Spindle Washer Used with Bearing Kit BK1-150 and Castle NutYour spindle should have a Washer # SW1000 between the outer bearing and the Spindle Nut # 165686. As this part is typically always reused that is the reason it is not included in the Bearing Kit # BK1-150. Instead we only include the cotter pin and D-washer since the cotter pin and D-washer can break. You will be able to discard the D-washer since you have the castle nut style spindle and do not need that part.
view full answer... - Wobbler Rollers With 1-1/2" Long Bushing For 1" Shaft EZ Loader Magic Tilt TrailerYou need the Yates Ribbed Wobble Roller # YR500YW-8P. It matches your roller at 5" in diameter, 3" wide and uses a 1-1/2" long bushing to fit on a 1" shaft. The Washer For 1" Spindle # SW1000 are sold individually so be sure to order the correct amount that you need. We also have the CE Smith Wobble Roller Retainer Ring # CE10981 for replacing your current retainers.
view full answer...
- Correct Replacement Spindle Washer for Dexter 3,500LB AxleA standard spindle will use the Washer For 1" Spindle # SW1000 or the D Washer for EZ Lube Spindles # 5-23.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jameson C
Updated by:
Wilson B
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Sierra K.
1/14/2022
You will need to know both the inner and outer bearing numbers. These numbers can be found stamped on the bearings themselves or you can use a digital caliper such as item # PTW80157 to measure your spindle to the thousandths of an inch at the seal, inner bearing and outer bearing.
Helpful Links
Hand-ToolsPerformance-ToolPTW80157.html