Thule Replacement Aluminum Shank Adapter - 1-1/4" to 2"
(62 reviews)
Price: $47.15
In Stock
Thule Replacement Aluminum Shank Adapter - 1-1/4" to 2"
Item # 853-7292
Retail:$50.20
Our Price: $47.15
You Save: 6%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (62)
- Q & A (0)
- Videos (1)
- Photos
Thule Accessories and Parts - 853-7292
- Hitch Bike Racks
- Shanks and Adapters
- Shank Adapter
- Thule
Features:
- Slides on to 1-1/4" shank to convert to 2" shank
- Replacement for the following racks:
- TH954
- TH912
- TH914
- Hardware not included
1500056427 Thule Replacement Shank Adapter
8537292
Video of Thule Replacement Aluminum Shank Adapter - 1-1/4" to 2"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Thule - Hitch Bike Racks - 853-7292
Today, we're gonna take a quick look at the Thule replacement aluminum shank adapter. This is gonna allow you to convert your inch and a quarter shank on your Thule bike rack to a two inch shank. So that's gonna upgrade your shank diameter, so it's gonna git into that two inch by two inch hitch receiver.This is going to be a direct replacement from Thule for the following bike racks. It's gonna the TH945. The TH912. And TH914.There's gonna be a couple of the older style of Thule bike racks.This is gonna be made of a durable, but lightweight aluminum construction, so we don't have to worry about any rusting or corrosion.
We'll have our hitch pin hole here. That'll accept a standard five eights inch hitch pin to go through there, or you're anti-rattle bolt that came with your bike rack.And then we'll have the actually attachment location here.Now, this doesn't come with any hardware, so if you need the screw to attach that on to your inch and a quarter shank, that is sold separately. You can find that here at etrailer.com using part number 853-5787-02. That's just gonna be a little M6 by 16 millimeter flat cap screw that fits inside there. Just fits right down in place.
It'll be nice and flat so we don't have to worry about any obstruction for our bike rake itself, or for fitting our shank into our hitch.And it'll also have that nice black powder coat finish, so it'll stay looking nice, matched the rest of our bike rack.As far as our dimensions, it's gonna be 10 inches long, going from end to end. The width, of course, will be two inches, outside edge to outside edge. Our inner diameter or our inner measurement, excuse me, is that one and a quarter inch, so we can fit it over our original shank on our Thule bike rack. And then the distance from the end of the shank to our hitch pin hole, is one and nine sixteenths inches.And that's gonna do it for our quick look at the replacement aluminum shank adapter for an inch and a quarter to two inch from Thule.
Customer Satisfaction Score:
87% were satisfied with this product
13% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Thule Replacement Aluminum Shank Adapter - 1-1/4" to 2" - 853-7292
Average Customer Rating: 4.6 out of 5 stars (62 Customer Reviews)
by: Tim07/17/2023
Cut tubing length to fit 1-1/2 inch Thule bike rack into 2 inch receiver
by: George07/31/2020
I just received and used the products I ordered from etrailer. I am very happy that the Replacement Thule Conversion Shank and screw for My Bike Rack work very well.
by: Karen04/28/2016
New car came with a larger hitch than on my old car so my 4 bike Thule rack couldn't be used. This adapter was perfect for adapting my larger hitch so I can now use my bike rack again! Outstanding product and even better service from etrailer.
Note: Do not buy the U Haul adapter for this same purpose. It allows too much wiggle between the smaller hitch and adapter that then results in too much swaying of the bike rack.
by: Neal05/12/2015
As I needed this for a Thule 1 1/4" to 2" bike rack I expected the holes to line up but like other reviewers I had to drill my own hole. Still fits a little loosely in my Curt 2" receiver but with the threaded pin it doesn't move too much. We'll see how it works when I take the bikes for a ride.
Michael L.
5/19/2015
Thank you for taking the time to leave a review. This adapter is intended for specific Thule models, and is not compatible with all models. We do not recommend modifying the product. Thanks!
by: Mike P.10/23/2013
I have a Thule Pathfinder hitch mount bike carrier. This adapter will work but does require some custom drilling to make it so. It would be nice if a more accurate chart or the like was available so that we could positively identify which is the correct adapter for a particular Thule carrier. We'll make this one work.
Patrick B.
10/30/2013
Replacement parts can be difficult to narrow down since so many of them are so similar. We can help with that, particularly once we know the model number of the rack. Give us a call or send us an email.
by: DP03/03/2022
It was just what the doctor ordered. Thank you!
Dp
3/4/2023
This replacement part continues to serve its purpose faithfully!
by: Edwardlh104/14/2013
The product appears to be well made and sturdy enough although I never got to use it for the intended purpose (mounting a Thule Parkway 4 bike carrier). I have 2 vehicles with trailer hitches suited for the job.
The problem is that this shank adapter adds approx' 6" to the length of the tongue that inserts in to the trailer hitch. For my '08 F-150 that means leaving my spare tire home every time we go bike riding because the shank butts up against the spare tire (not gonna happen)!
The other vehicle is an '01 Pathfinder but the trailer hitch on this vehicle is sealed on one end preventing the shank from penetrating far enough to get the retaining bolt inserted...Strike 3 I'm out. We're selling the bike rack and for now at least just hauling the bikes in the bed of the F-150. I know that's not ideal for the bikes but in the short term I'm not ready to drop $200 for a new bike rack.
by: John08/06/2018
We switched vehicles and went from the small hitch to the large hitch. This product worked perfectly to adapt our bike rack to the new vehicle's hitch. It fits tight and snug. I recommend that you order all the washers and bolts that show up on their page as suggested other purchases (maybe a grand total of $3 more but I needed a couple of them so well worth it). The part came quickly and was properly packed.
by: Dana V05/01/2014
This insert, originally made for a thule bike rack, works great as an adapter to fit the type 3 trailer hitch. I had bought a Saris bike rack but the adapter that came with it is poorly designed, allowing the bike to bounce and wooble with every bump in the road. This Thule part fits the Saris insert keeping the rack sturdy.
by: Robert j.04/02/2015
I ordered two products a couple days apart. Both orders, a locking receiver pin and a 1 1/4 to 2 inch receiver adapter, arrived on time and in good condition. The price was very competitive and service was prompt. I will certainly check retailer first if I need hitch related products in the future. Very good experience!
by: Christopher09/08/2018
Fit perfect, ordered the screw ( M6 x 16mm Flat Cap Screw for Thule Bike Carriers - 853-5787-02) that other reviews had recommended. Would have been disappointed (in myself) if I had not done so. This screw ties the adapter into the 1 1/4 male end.
Customer service is EXCELLENT. You can order with confidence.
by: Michele06/18/2014
The adapter is great, the service from etrailer.com was also good! The only pet peeve I have is the difficulty I had to change the quantity of the second item in my order. It was not easy during the ordering on your page. I had wanted two end caps, decided to only get one as I found it too difficult to change the quantity!
Shipping was fast!
Thanks for your help in replacing my lost parts.
by: Roger M.09/01/2017
I purchased an adapter to go from 2" receiver to 1 1/4 for a bike rack. Several things I liked about this adapter was it was aluminum and relieved on both sides. Why this is important is to prevent it from rusting in place if left on to long as steel on steel will.
by: Ed C.01/27/2015
High quality aluminum adaptor that required additional drilling to line up the hitch, adaptor and bike rack. I expect years of service from this adaptor.
by: Dean07/20/2012
It worked OK. More my problem than yours. My Thule bike rack is an older model and not specifically listed for this adapter. With a little modification it will work fine.
by: Jeff W07/20/2012
Originally my Thule Bike Rack came with this adapter but it was plastic, and I had no use for it at the time and threw it out.
My new "tank" I drive came with a 2" receiver so this adapter was required. GREAT QUALITY. Much better than what originally was sent with bike rack.
etrailer also provided great feedback throughout the process regarding order processing, shipping, and shipment tracking. Would def use them again for future needs.
by: E Rod08/16/2017
This adapter is exactly what i needed to install my Thule Roadway 914xt onto my 2 inch hitch receiver. The service from etrailer, makes the shopping experience easier and smoother.
by: Dirk R07/13/2016
This the 2nd one that I've needed. Requires customized holes drilled for my particular receiver but otherwise works as expected. Item delivered on time. I recommend etrailer.com.
by: John K.04/17/2015
Just what I was looking for to make a better 2" to 1.25" adapter for my Curt bike rack. This was shipped on Saturday and received on Monday. Thanks for the great service.
by: Pat01/20/2017
Purchased adapter and after checkout realized that I needed this 36 cent screw.
Called customer service and the happily combined the order which arrived in 48 hours. Great fix for my bike rack and great customer service as well!
(Really should add the screw with the adaptor though)
Thx and will use the company in the future
by: Dave09/11/2018
I had a great experience with etrailer helping me find a part I misplaced. They ordered the replacement and I received it faster than they said it would take.
by: David D.01/28/2015
The Thule Replacement Shank Adapter (#853-7292) that was ordered fit and performed as promised. I am glad that I read other reviews and made sure to order one of the screws needed to hold the adpater in place. Product number for screw - #853-5787-02. Items were easy to order and shipped quickly!
by: George Merrill08/25/2017
Had to saw it down to get the bolt holes to all line up, but now it works like a dream. Bike rack is tight and secure.
by: Dennis03/04/2018
This product was a perfect match for my Thule 912xt bike rack. I received the item in a timely manner.
25
62
Show More Reviews
See what our Experts say about this Thule Accessories and Parts
- Will Thule Aluminum Shank Adapter, # 853-7292, Work In A 1-1/4 Inch Hitch ReceiverThe only way to go from the 1-1/4 inch receiver to a 2 inch bike rack is to use the Brophy Hitch Adapter, # HTAD, but you will reduce the tongue weight capacity by 50 percent on the lowest rated item, either the trailer hitch or the vehicle. For example, if your 1-1/4 inch hitch has a 200 lbs. tongue weight capacity and you use the Brophy hitch adapter the hitch tongue weight capacity will be reduced to 100 lbs. The Thule Replacement Aluminum Shank Adapter - 1-1/4 Inch to 2 Inch, # 853-7292,...
view full answer... - Can Stinger Adapter be Used On Thule Carrier With 1-1/4 Inch Shank To Fit 2 Inch Trailer HitchThe Thule Replacement Aluminum Shank Adapter, part # 853-7292 is designed to work with Thule bike carriers # TH954 and # TH914, and allows the 1-1/4 inch stinger on the bike racks to fit a 2 inch trailer receiver. I called my contact at Thule and they told me that unfortunately there is no adapter available to upgrade a # TH9045 bike carrier, which has a 1-1/4 inch shank to a 2 inch shank to fit your new trailer hitch. They told me the stinger cannot be swapped out either. They said the...
view full answer... - Will Using Thule # 853-7292 Allow Thule Ridgeline Bike Rack to Move Around in 2 Inch HitchWhen the adapter is fastened to the shank of your Ridgeline with the # 853-5787-02 screw, the connection between the adapter and your bike rack will be snug. The two parts will not move against each other. The shank of your Ridgeline should be threaded for the Thule hitch pin, part # THSTL2. Once the threaded hitch pin is used, it will draw the shank plus the adapter against the side of the hitch receiver, preventing any movement.
view full answer... - Solution to Allow a Bike Rack to Be Used at Rear of Jeep Rubicon and Still Fold UpThe hitch extender part # HE06 will give you 7 inches more distance from the hitch opening for the bike rack. This is a common product for Jeep owners due to the spare tire sticking out pretty far. Without knowing what rack you have or how much clearance you would need it's hard to say for certain if this would be a fit. You should note that these do cause the capacity of the hitch to be cut in half. I attached a review video for more info on this product as well.
view full answer... - Replacement Shank for a Thule Expressway Bike Rack to Fit in a 2 Inch Trailer Hitch ReceiverThe shank for the Expressway bike racks has an L-shape with the vertical part welded to the horizontal part. Replacement shank # 853-7292 will not work as a replacement because of the original design of the Expressway. You would have to use a reducer to use the 1-1/4 inch shank in the 2 inch receiver. You can use # HT02. The use of this adapter does not reduce the tongue weight capacity of the hitch and it comes with a pin for the part that fits in the 2 inch receiver. A 1/2 inch diameter...
view full answer... - Will Thule Parkway TH957 Bike Rack Work with Thule Replacement Aluminum Shank Adapter, # 853-7292We can offer you a solution, however the Thule aluminum adapter # 853-7292 will not work with your Parkway # TH957 bike rack. This part is intended for use specifically with Thule rack models # TH912, # TH914 and # TH954. My contact at Thule confirms this. In order to use your Thule Parkway TH957 rack that has a 1-1/4 inch shank with a 2-inch hitch receiver, you can instead use a hitch reducer sleeve such as the Brophy # HT02. This steel reducer slides into your 2-inch hitch receiver and...
view full answer... - Can I Use the Aluminum Shank Adapter # 853-7292 with My Thule 937 Hitching Post ProTo be able to use your Thule Hitching Post Pro 937 in the 2 inch hitch on your truck you will need to use the Brophy Trailer Hitch Adapter, item # HT02, see video link. Along with this adapter you will also need an Anti Rattle device for the 2 inch receiver to help keep the bike rack from bouncing. The anti-rattle hitch pin, item # 63232, would be a good choice for this application. I spoke with my contact at Thule on your behalf and found that the Thule Replacement Aluminum Shank Adapter...
view full answer... - Can I use This Adapter To Use my Tule 1-1/4 T2 Bike Rack with My 2 Inch HitchThule does not recommend using the aluminum adapter with the 1 1/4 inch T2 bike rack. We do offer adapters which would allow you to use the rack in a 2 inch receiver. You could use Brophy part # HT02 or Hidden Hitch part # 80300. Part 80300 will decrease the hitch tongue weight capacity by 50 percent. If the hitch offers a 300 lbs tongue weight capacity the rack and bikes combined cannot exceed 150 lbs when using an adapter.
view full answer... - Will the Thule Roadway Bike Rack fit a Draw Tite Hitch 36493The Draw Tite Hitch part # 36493 that you referenced is also a 1-1/4 inch hitch so your Thule Roadway part number 912XT that is designed for a 1-1/4 inch hitch would work well in it. I attached an install video for the hitch for you to check out as well.
view full answer... - Using Bike Carrier for 2 Inch Receiver on a Class I Hitch on a 2008 Subaru OutbackTwelve pounds over is pretty close, and we don't usually factor in the weight of the adapter # HTAD. Considering those facts, if you were to take the seats off of the bikes to reduce the weight even more then you would likely be right at that 100 pounds and it would work. You could also add a stabilization strap # 18050 to reduce the stress on the hitch. I linked a video showing how it works.
view full answer... - Using a Thule Parkway Bike Rack for 1-1/4 Inch Trailer Hitches in a 2 Inch Trailer HitchWhat I recommend is to use a reducer sleeve, # HT02, an anti-rattle device # 63232, and then use the threaded bolt for your Parkway like normal on the 1-1/4 inch side of the reducer sleeve. This will take the wobble out at the receiver and adapter and at the bike rack and adapter.
view full answer... - Clearance Between Thule 4 Bike Rack and 2005 Chrysler Town and Country with Adapter # 853-7292You will need to know what class hitch you currently have on your Town and Country. This should be indicated on the safety warning label on the hitch. If you have a class l hitch installed, there will be a stop or indent inside the receiver wall that prevents Class ll carriers or ball mounts from being used. If you find that you have a class l receiver, it is rated for a tongue weight capacity of 200 lbs, and you would need a class l rack or carrier. All Class l bike carriers are limited...
view full answer... - Replacement Shank Sleeve Adapter for Thule Bike Rack for 1-1/4 Inch Trailer Hitch ReceiverThe Thule Replacement Aluminum Slide-On Shank Adapter, part # 853-7292 will fit certain Thule bike racks. It's a fit for the following racks: Thule Ridgeline, part # TH954 Thule Roadway 2-bike model, part # TH912 Thule Roadway 4-bike model, part # TH914 If you have a different rack, please let me know the model number or name, and I'd be happy to help you find a replacement shank sleeve.
view full answer... - Replacement Thule 1-1/4 to 2 Inch Adapter For Thule Roadway Bike RackThanks so much for the photos, they were very helpful, and based on that and the fact you mentioned it was from 2009, I am almost certain that what you have there is the Thule Roadway 914 bike rack. We do in fact have the correct 1-1/4" to 2" adapter for the Roadway 914: - Thule Replacement Aluminum Shank Adapter - 1-1/4" to 2" # 853-7292 This does have two holes to attach it to the shank/stinger, is 10" long, and measures 1-9/16" to the center of the hitch pin hole. That is a similar...
view full answer...
- Shank Extension for Thule Doubletrack Trailer Hitch Mount Bike Rack to Clear Spare on Jeep WranglerThe replacement shank # 853-7292 is designed to fit certain Thule bike racks as a replacement. It does not fit as a replacement or as an extension on the Doubletrack, # TH990XT. You would have to use a hitch extender like # HE06 for a 2 inch hitch or # hes6 for a 1-1/4 inch hitch. Please note that the use of an extension reduces the tongue weight capacity of the hitch by 50 percent. So if the hitch on your Jeep is rated for 350 pounds tongue weight, using the extension will reduce that...
view full answer... - What is the Length of the Thule Replacement Aluminum Shank Adapter, # 853-7292I went out to the warehouse and pulled the Thule Replacement Aluminum Shank Adapter, # 853-7292. It is 10 inches long overall and 2 inches square. It is meant for use on Thule bike racks 954, 912, and 914.
view full answer... - Replacement 2 inch Hitch Adapter for Thule Roadway 4 Bike RackI checked with Thule and the correct 2 inch hitch adapter you need for your Thule Roadway 4 bike rack is the part # 853-7292 that you mentioned.
view full answer... - Replacement 2 inch Adapter Recommendation for Thule 912 Bike RackFor your Thule 912 you have to go with the 2 inch adapter that is specifically designed for it part # 853-7292 that you mentioned. We can't ever recommend any modifications that would void the warranty of your bike rack and not using the correct replacement part would do that.
view full answer... - Fitting a Thule Hitch Mount Bike Rack for 1-1/4 Inch Hitches in a 2 Inch HitchThe replacement shank adapter, part # 853-7292 you referenced, works on the Thule RidgeLine and both the 2-bike and 4-bike versions of the Roadway. All of which have been discontinued but if either are the rack you have then it will work for you. If not, let me know what rack you have and I'll see if we have anything that works. If it's easier just reply back with a picture of your rack.
view full answer... - Dimensions of Replacement Aluminum Shank AdaptersI went out to the warehouse and pulled replacement aluminum shank adapters # 853-7292 and # 853-7489 and took the requested measurements for you. Part # 853-7292 is 10 inches long, 2 inches tall and the shank opening is 1-1/4 inches. From the center of the hitch pin hole to the end of the shank measures 1-9/16 inches. Part # 853-7489 is 4-1/4 inches long, 2 inches tall and the shank opening is 1-1/4 inches. From the center of the hitch pin hole to the end of the shank measures 1-1/2 inches....
view full answer...
- What 1-1/4" to 2" Shank Adapter is Needed for Older Thule Hitching Post Bike RackIt looks like the older 945 version of the Thule Hitching Post was designed for a 2" hitch so you may have a newer version that would require the Adapter # 853-7489. If you can send me some photos of your current bike rack I can help you determine what you have and what adapter will be needed. The adapter # 853-7292 that you referenced is not a fit for a Thule Hitching Post bike rack. I have attached a link to a video of the 7489 adapter that you can check out.
view full answer... - Will Thule Replacement Shank Adapter Work with Thule 925 Docking StationThe best option for you is a reducer like # HT02. This reducer transforms your 2" receiver into a 1-1/4". This lets you use all your 1-1/4" hitch accessories, such as bike racks, cargo carriers, or ballmounts with a 2" hitch. I have included a video review of this part for you to check out.
view full answer... - How to Carry the T2 Thule Bike Rack TH917XTR in a 2 inch HitchSince you have the 1-1/4 inch version of the Thule T2 Bike Rack 917XTR you will need to use the Hitch Reducer sleeve part # HT02. This will fit in the 2 inch hitch and will reduce it's size down to a 1-1/4 inch hitch which will allow your rack to be installed in it and won't add much length to the rack (only about 3 inches. For a locking hitch pin to go along with this you would want the # e98880. I attached a review video for this adapter as well.
view full answer... - Does Thule Aluminum Shank Adapter 853-7292 Come with Set ScrewYou will need the cap screw part # 853-5787-02 to secure the part # 853-7292 to your rack if you misplaced yours.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Manda E
Installed by:
Kathleen M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Karen
2/7/2018
Thanks for reaching out. The product is still working perfectly, looks the same as it did a year ago, and allows us to use the Thule bike rack regularly. The product is significantly better than the part we bought from another retailer.