Replacement Control Box for Thomas Payne Momentum Recliners and Sofas - Qty 1

See what our Experts say about this Thomas Payne Accessories and Parts

• Heater on Thomas Payne Theater Seating Not Working
  There could be 2 different issues here, so I'll give you a way to test out the control box which will help us figure out what the issue might be. To test the heater unplug the red and black wires from the control box (located behind and under your recliner) and test using a multimeter like part # PTW1714. Using the continuity setting on the meter, check and see if there is continuity on the wires of the control box- if you have continuity then that means the control box is bad and you...
  view full answer...
• Thomas Payne Powered Theater Seating Troubleshooting
  The required power for Thomas Payne furniture is 110v AC or 12v DC to power these units. So you could be facing a voltage drop and need to increase the gauge of wire to the outlet you have the unit plugged into. If you have the correct amount of power but the none of the functions are working then your control box is to blame. If you have a Seismic model you'll need the Replacement Power Control Box for Thomas Payne Seismic Recliners and Sofas - Qty 1 Item # LC36FR and if you have the...
  view full answer...
• Troubleshooting Lights on Thomas Payne Momentum RV Dual Reclining Sofa
  If the lights are not working on your Thomas Payne Momentum RV Dual Reclining Sofa 195-055-056-058 first just try unplugging it from your outlet. If that does not work you should unplug the 12V cords from the back of the sofa and then reconnect them. I have added a link to a video which shows how you can do this; it will be at about the 4:00 mark in the video. Should you need replacement parts to fix the issue we carry the Replacement 12V Cord for Thomas Payne Momentum Recliners and Sofas...
  view full answer...
• Troubleshooting Thomas Payne Momentum Recliner Not Closing
  It sounds like the issue may be in the control box. There is a way to troubleshoot the control box and that is by switching the control boxes from each recliner to the other. If the recliner that does not close now, closes with the opposite control box and vice versa, you will need to replace that control box. You will need the Replacement Control Box for Thomas Payne Momentum Recliners and Sofas - Qty 1 # 195-387596 to correct the problem.
  view full answer...
• Troubleshooting Thomas Payne Recliner Power Issues Where Nothing Works
  Since your Thomas Payne Recliner has no power for any function, I recommend first plugging something into the outlet to make sure that isn't the issue. Next, I recommend checking the Cup Holder # 195-387597 and it's wiring connection because that selects the functions as a built in wired remote to the control box. Next check the connections to the control box # 195-387596 itself. Finally check the 12V power cord # 195-387595. There are no external fuses or circuit breakers that would...
  view full answer...
• Is There a Fuse in the Replacement Control Box for Thomas Payne Momentum Recliners and Sofas
  The Replacement Control Box for Thomas Payne Momentum Recliners and Sofas part # 195-387596 does not contain a fuse. The small black plug is designed to plug directly in to the existing plug on the sofa or recliner and is a direct replacement for the Momentum series from Thomas Payne
  view full answer...
• Troubleshooting Thomas Payne Momentum Sofa That Wont Recline But Other Functions Work
  It sounds like you have a Thomas Payne Momentum RV Dual Reclining Sofa that one of the control boxes has gone bad on; in our experience, 90% of problems with the Thomas Payne Momentum RV Dual Reclining Sofa are associated with a faulty control box and there is an easy way to test this. If you swap the control box on the side that is working with the one on the side where the footrest and reclining function doesn't work and it then functions- you know the control box is bad. You can replace...
  view full answer...
• Troubleshooting Thomas Payne RV Recliner That Does Not Retract
  It sounds like the control box is faulty on your Thomas Payne recliner, however, you could also try unplugging the chair for 10+ minutes to let the chair reset and also check for any wires that could have been pinched and damaged. If it is still not able to recline then you very likely need a new control box. To find the correct control box you will need to verify if you have a Momentum series or Seismic Series. The manufacturer was not able to tell me exactly where to look for a part...
  view full answer...
• Troubleshooting the Replacement Cup Holder for Thomas Payne
  To operate the lights on the Cup Holder for Thomas Payne Momentum Recliners and Sofas # 195-387597 you just use the button found on the outer ring of the cup holder (be sure that it is not locked). If when the lights are off, the system is still lit (other than the small spots on the buttons) you likely have a malfunction and will want to unplug the chair to reset it. If that doesn't solve the issue, then the switch is bad and you will need the Replacement Cup Holder for Thomas Payne Momentum...
  view full answer...
• Troubleshooting Thomas Payne Theater Seat Recliner Seat Heater Not Connected
  It sounds like you have the heating pad in your chairs and are missing the wiring harness that connects the seat heater to everything else. The Replacement Seat Heater Kit for Thomas Payne RV Furniture # 195-000113 connects to the two prong connection from the seat heater you described. It will also connect the heating pad to the remote control and the power supply to get the seat heater up and running.
  view full answer...
• Thomas Payne Dual Theater Seating Massage Feature Troubleshooting
  I've spoken with Thomas Payne about your dual theater seating # 195-000091. You need to check all the connections and if the problem is still happening, then you will need to replace the control box. Usually that will fix it.
  view full answer...
• What is Warranty Length of Thomas Payne Recliners with Heat Function
  The warranty on all of the now discontinued Thomas Payne RV Swivel Glider RV Recliner w/ Heated Seats like the 195-000029, is 1 year from the date of purchase. If the chair is OEM in the RV then the warranty is 1 year from the date of the original purchase. To test the heater unplug the red and black wires from the control box (located behind and under your recliner) and test for continuity using a multimeter like part # PTW1714. If you have continuity then that means the control box is...
  view full answer...
• Troubleshooting Thomas Payne RV Couch Cupholder Power
  Looking into this it sounds like you have a loose connection to the cupholder wiring connectors on your Thomas Payne couch or the cupholder wiring is just bad and needs to be replaced. The Replacement Cup Holder for Thomas Payne Momentum Recliners and Sofas - Qty 1 # 195-387597 will connect directly to the couch wiring. If that doesn't work it could be a bad control box. If you have The Momentum version The Replacement Control Box for Thomas Payne Momentum Recliners and Sofas - Qty 1...
  view full answer...
• Replacement Power Cord For Thomas Payne Recliners And Sofas
  The Replacement 12V Power Cord for Thomas Payne Momentum Recliners And Sofas # 195-387595, will work with the following Thomas Payne Momentum recliner or sofas: -195-000055, 195-000056, 195-000055-056, 195-055-056-058, and 195-055-056-057. If you have the Thomas Payne Seismic Series Recliners, you can use the Replacement Power Cord with Power Supply Box for Thomas Payne Seismic RV Power Reclining Sofas # 195-000111.
  view full answer...
• Troubleshooting Heater Not Working on Thomas Payne Recliner but Massage and Lights Work
  I spoke with my contact at Lippert who said that either the heater is bad or the control box needs to be replaced on your Thomas Payne Momentum recliner. To test the heater unplug the red and black wires from the control box (located behind and under your recliner) and test for continuity using a multimeter like part # PTW1714. If you continuity then that means the control box is bad and you can replace it with part # 195-387596. If you don't have continuity then the heater is bad and...
  view full answer...
• Thomas Payne Recliner Has Power But Does Not Work
  This sounds like a faulty control box, and unfortunately that is a pretty common issue with these recliners. To fix it, you'll just have to replace your control box with the Replacement Control Box for Thomas Payne Momentum Recliners and Sofas # 195-387596 if you have the Momentum series recliner, or the Replacement Power Control Box for Thomas Payne Seismic Recliners and Sofas # LC36FR if you have the Seismic series recliner. It also wouldn't hurt to do a hard reset before you replace...
  view full answer...
• Troubleshooting Functions Not Working on Thomas Payne Momentum RV Dual Reclining Sofa
  There are a few possibilities as to why only one side of your Thomas Payne Momentum RV Dual Reclining Sofa is acting up (or not acting up at all in your case). There are 3 components that allow the recliner to operate the lights, massage, and heater. These are the Cup Holder # 195-387597, Control Box # 195-387596, and the 12V Power Cord # 195-387595. To determine which of these components needs to be replaced simply try using parts from the side that is working. Start off by swapping...
  view full answer...
• Troubleshooting Thomas Payne RV Couch Cupholder Buttons Flashing
  Sounds like possibly a loose connection to the cupholder wiring connectors of your Thomas Payne couch or the cupholder wiring is bad and would need to be replaced. For a replacement we have the part # 195-387597 which in the product pictures you can see how it connects to the couch's wiring. Also it could be a control box like the part # 195-387596 for if you have a Momentum. To test if it's a control box what you can do is swap the left side control box with the right side. If the problem...
  view full answer...
• Help Finding Notch to Remove Thomas Payne Cupholder
  I spoke with my contact at Lippert who said that there is a notch in the side of the cup holder that you should be able to feel with your hand. I attached a picture of where it is as well. Once you find it you will need to use a flathead screwdriver or a butter knife to pop it up. This will reveal 2 screws that you will need to take out before detaching the cup holder wiring from the arm. She also said that when the massage function goes out this is typically something that is related...
  view full answer...
  
• Testing Heater for Thomas Payne Momentum Sofa
  When testing the control box you will not unplug it; you will use Multimeter # PTW1714 and unplug the red and black wires from the control box to test them for continuity. If you do have continuity the control box is simply bad and you can replace it with the Replacement Control Box for Thomas Payne Momentum Recliners and Sofas # 195-387596.
  view full answer...
• Why Would The Lights, Massage and Heat Not Work When Recliner is Fully Reclined?
  It sounds like the wiring may be shorting out when the recliner is fully reclined. I recommend checking the wiring for any shorts or signs of the wiring connectors coming apart as it reclines.
  view full answer...
• How To Access Components Under a Thomas Payne Recliner That Has No Power to Open the Foot Rest
  The manufacturer unfortunately did not design a manual release for loss of power. For this reason they recommend not screwing their furniture to the floor, so you'd be able to flip it forward for any repairs. Obviously some times this is out of your control because it was done prior to you owning it. You're going to need to try to access the parts like the Control Box # 195-387596 and the 12V Power Cord # 195-387595 from the back. There are two tabs that hold the back of the recliner on,...
  view full answer...
• Solution for Thomas Payne Couch that Heater Switch Does Not Work
  The control box of your couch is not interpreting the switch turning off and on. This is evident as the other functions of your couch are working properly with the cup switch. So you'd need the replacement control box part # 195-387596 and you'd be set.
  view full answer...
• Replacement Parts For Thomas Payne Power Recliner That Will Not Recline
  When looking into why your Thomas Payne Power Recliner won't recline it sounds like the control boxes have gone bad. The Replacement Control Box For Thomas Payne Momentum Recliners and Sofas # 195-387596 will get your recliner to recline again. This is for the Momentum Recliner. If you have The Thomas Payne Seismic Recliner you will need The Replacement Power Control Box for Thomas Payne Seismic Recliners and Sofas # LC36FR. I attached a review video link below.
  view full answer...

Do you have a question about this Accessories and Part?