Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
4" x 1-1/2" Oval. Trailer light with reflector functions as a clearance or side marker light. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. 2-Wire pigtail. P2 rated.
Features:
Specs:
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
Average Customer Rating: 4.9 out of 5 stars (315 Customer Reviews)
4" x 1-1/2" Oval. Trailer light with reflector functions as a clearance or side marker light. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. 2-Wire pigtail. P2 rated.Exact replacement for non-functional clearance light on my RV. A bit confusing when researching for the correct part, as the original had '89-385 Command' printed on the base, and now they are labeled 328-K-52.
These replacement lights seem to be a perfect fit to replace the originals on my Forester.
Havn't had a chance to put them on as we are in the middle of winter. Spring is on its way I hope, and then more traveling.
The light is exactly what I need to replace the burned out lamp on my motor home. The staff at etrailer works diligently to provide products and customer service. Shipping is a slow since USPS is utilized for small products.
Exact replacement Easy fix
Reliable performance! Very pleased with this product. We don't have covered storage for our RV so it's exposed to a lot of direct sunlight. Our light consistently works as expected! We highly recommend this light.
Olga M.
7/4/2023
Im pleased to report that after a year we have zero issues with the light. It continues to work perfectly :
Perfect replacement for my 2019 Jayco Jayflight 264BH.
I bought these lights to replace the marker lights on my 2007 Winnebago Adventurer as Winnebago told me the manufacturer of the original lights had gone out of business and the lamps and lenses were no longer available. They fit well and look like to originals and being LED they're brighter.
Fits great and easy install!!
I ordered one of the amber-lensed units from etrailer a couple of years ago. That one is still working fine and I expect this one will work equally well now and into the future. They're a little pricey for what they are but they're an exact replacement for the ones on my camper, unlike the less-expensive alternatives I've found that have different spacing on the attachment screws. I don't need any more holes in my RV than I've already got, thank you very much.
Item I purchased was identical to what I had. I like that.
Part was perfect, installed and works as described!
It is a treat to be able to get the exact lamp that my 2019 Jayco has for clearance and marker lamps. The 2-diode version is bright and nearly flush to the sides of the trailer (and won't catch branches and brush on those narrow trails). And affordable also, so I bought extra lamps for spares for later.
Russ
12/15/2022
Glad to say that another year in the sun has not faded the lense color and brightness of these lamps.
As advertised
Purchased to replace the two lower rear corner marker lights that mount to the outside of the body, to the rear of the rear axle. They were received via USPS in good condition, packaged in a bubble envelope. Tested both lights prior to installation, put a dab of sealant at each screw hole and around the hole the wires go through, then installed the lights. Mount holes aligned with those from my previous lights, which was a pleasant surprise. I used heat shrink butt splices to connect, red to hot (+) and white to ground (-) then ran a bead of sealant around the light lens to prevent water from finding its way into the light, which is what caused the original lights to fail. Since these mount to the body below the floor, the wires come out under the floor and are exposed to water thrown off the rear tires, so I also cleaned the area where the wires come through and then applied sealant to prevent water from following the wires and saturating the interior of the body panels (common cause of delamination) and possibly entering the lights from that point.
Want to thank you for taking the time to work with me trying to fine a lens for my marker light. It was a direct fit for the original, so now have spare light base, and marker light is fixed.
Great service and great product.
It fit what I was looking for.
Fast service and very reliable. Reasonably priced
Great service, product is exactly what I needed, works great
Excellent service, call in was professional, great website
Exactly as advertised. Looks like a perfect replacement on my Winnebago View!
Quick delivery. Easy to install and still working. Good quality.
Package was delivered quicker than expected.Great customer service...
Mark
3/29/2023
Worked as expected.No issues..
Perfect match to my RV, works great. Delivered a day early as well.
It perfectly replaced the rear side marker lamp on my '18 Windsport
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
George
10/20/2023
Light still good after a year. Much brighter than original light on other side of vehicle. Will eventually replace original light.