Troubleshooting Thomas Payne RV Couch Cupholder Buttons Flashing

Question

Question:

The right side of our couch is acting up. The cup holder will flash light and the massager will send a pulse every so often.

asked by: Carissa

0

Expert Reply:

Sounds like possibly a loose connection to the cupholder wiring connectors of your Thomas Payne couch or the cupholder wiring is bad and would need to be replaced. For a replacement we have the part # 195-387597 which in the product pictures you can see how it connects to the couch's wiring.

Also it could be a control box like the part # 195-387596 for if you have a Momentum. To test if it's a control box what you can do is swap the left side control box with the right side. If the problem moves to the other side then you know it's the box. If it stays then it's the cupholder.

expert reply by: Jameson C

0

Answer 1

Since you mentioned you've already replaced your cupholder #195-387597, and your power cord #195-387595, I suggest you try to reset the chair if not preformed already. You'll want to unplug the unit from power, and let it set for about 10…

view full answer...

Answer 2

The replacement Thomas Payne RV cupholder that has the most features is the #LC38FR which has light, open, close, massage, heat, and lock/unlock buttons. If you let me know which specific sofa you have I can see which replacement you'd need.

view full answer...

Answer 3

It sounds like the issue may be in the control box. There is a way to troubleshoot the control box and that is by switching the control boxes from each recliner to the other. If the recliner that does not close now, closes with the opposite control…

view full answer...

Answer 4

According to Lippert, the manufacturer, if the light went out on the cupholder, that generally means the connection is poor at the plug, so you'll want to check that. To do so, remove the rubber coaster from the bottom of the cupholder, and using…

view full answer...

Answer 5

The Thomas Payne Seismic Left Arm Power RV Recliner w/ Heat, Massage, LED Lights #195-000099,which is no longer available. does in fact have heating and cooling options. Start by checking the wiring of the heating pad for continuity when the heating…

view full answer...

Answer 6

To get the cup holder removed, you will need to locate a notch inside the cup holder. You should be able to feel with your hand, but can be a little tedious. Once you find it, you will need to use a flathead screwdriver to pop it up as this will…

view full answer...

Answer 7

The Replacement Cup Holder for Thomas Payne Momentum Recliners #195-387597 will work for the Momentum series recliners (#'s 195-000055, 195-000056, 195-000055-056, 195-055-056-058, and 195-055-056-057) if you have one of those models then this…

view full answer...

Answer 8

I spoke with my contact at Lippert who said that there is a notch in the side of the cup holder that you should be able to feel with your hand. Once you find it you will need to use a flathead screwdriver or a butter knife to pop it up. This will…

view full answer...

Answer 9

The Replacement Cup Holder for Thomas Payne Momentum Recliners and Sofas - Qty 1 #195-387597 is a simple swap out. The lock simply keeps you from accidentally bumping the other features and turning them on or off. If the replacement cup holder remote…

view full answer...

Answer 10

Thank you for the pictures. I spoke with my contact at Lippert and he said that the connector you are showing on your Thomas Payne Momentum recliner is what connects to your cup holders, like part #195-387597, for controlling the heat, massage, and…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Troubleshooting Thomas Payne RV Couch Cupholder Buttons Flashing

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching