bing tracking image
  1. Accessories and Parts
  2. Ventline
  3. RV Vents and Fans
  4. Roof Vent
  5. Hardware
  6. Operator Parts
Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents w/ Wedge-Shaped Dome

Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents w/ Wedge-Shaped Dome

Item # BVD0462-00
Our Price: $14.06
Accessories and Parts
Shipping Weight: 0.37 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Replaces a lost or broken operator and knob on your Ventline Ventadome RV roof vent for motor homes and enclosed trailers. Properly sized mounting screw is included. 1-800-940-8924 to order Ventline accessories and parts part number BVD0462-00 or order online at etrailer.com. Free expert support on all Ventline products. Great prices and Fastest Shipping for Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents w/ Wedge-Shaped Dome. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (195)
  • Q & A (0)
  • Videos (1)
  • Photos

Ventline Accessories and Parts - BVD0462-00

  • RV Vents and Fans
  • Roof Vent
  • Hardware
  • Operator Parts
  • Knob
  • Mount Screw
  • Ventline
  • Ventadome

Replaces a lost or broken operator and knob on your Ventline Ventadome RV roof vent for motor homes and enclosed trailers. Properly sized mounting screw is included.


Features:

  • Comes with operator, knob and mounting screw
  • Works with Ventline Ventadome roof vent models V2092, V2094, V2119, V2128, and V2394
    • Knob and screw won't be needed for model V2119 with electric lift
    • Works with Ventline post-2008 trailer roof vents, vents made before 2008 require BV0115-04
  • Includes: 1 operator, 1 knob, and 1 screw
  • Made in the USA


Specs:

  • Arm length: 6-1/2"
  • Distance between mounting holes (center to center): 2-3/8"


Dimension

BVD0462-00 Ventline Operator Assembly





Video of Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents w/ Wedge-Shaped Dome

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Ventline Ventadome Trailer Roof Vents Replacement Operator Knob and Screw Review

Today we're going to be taking a look at the Ventline replacement operator knob and screw, part number BVD0462-00. If your operator arm is no longer working, there's no need to replace the entire assembly. You can just replace the arm and knob. This is going to be a direct replacement for the operator arm and knob on your Ventline Ventadome, model numbers, V2092, V2094, 2119, and V2128. Since the V2119 is electric, the knob is not needed. This kit comes with everything you need to replace it. All you'll need is a Phillip's head screw driver.

I've got a Ventadome right here. Let's go ahead and show you how to do that. From the inside of your RV looking up, this is what you'll see. You'll first need to remove the screen. We've got these tabs that we'll just need to push in, and then it should come right on off.

Work our way around. We'll set that aside, and then we can remove our knob, so we'll take our Phillip's head screw driver. Once we've got the screw loose, we can just take the knob off. It just pops on off. Then we can remove the tray here. Now, on each end here, all we need to do is just push towards the center, and it pops right on off.

It's just held in place by some teeth on either side. Now you can either disconnect your wiring or leave it. We're going to set the tray aside. With our wiring and tray out of the way, let's go ahead and grab our Phillip's head screw driver again and start removing the arm assembly here. We'll just take out the two screws. Then, with both screws out, we can just lift it up and start pulling it out.

The slider's going to slide off the dome itself and then we can just pull it through. For our new operator arm, we're going to be reusing the mounting screws from our old arm. What we're going to do is we're going to insert the arm here into the opening here. I'm going to put it in there sideways and then push it through. I'm going to make sure that the slider catches on the slide of our dome just like that, and we'll finish putting it in place, then we'll reattach our screws. Before we tighten down one, let's go ahead and get the other one started. Get them nice and snug. With our tray wiring and screen back in place, we can go ahead and take our new knob and screw, we'll line it up with the grooves on the gear here, push it in place, and then tighten up our screw. Now we can test it out. Works perfectly. That's going to complete our look at the Ventline replacement operator knob and screw, part number BVD0462-00.

Customer Satisfaction Score:


Customer Reviews

Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents w/ Wedge-Shaped Dome - BVD0462-00

Average Customer Rating:  4.9 out of 5 stars   (195 Customer Reviews)

Replaces a lost or broken operator and knob on your Ventline Ventadome RV roof vent for motor homes and enclosed trailers. Properly sized mounting screw is included.

by:

Great service! The part was correct, it was delivered on schedule and installation was a breeze. It was extremely helpful to have instructions and a video online to review before attempting the repair.

Leroy

7/27/2023

No problems in he past year, works great.



by:

The package arrived complete and undamaged. Lori gave excellent customer service throughout the complete process including several follow up emails. Thank you.



by:

Great and works well
Thank you for the
recommendation
I really appreciate it



by:

Fast delivery. Part fit perfectly.



by:

As advertised. Part came in earlier than expected. Will definitely keep doing business!



by:

Quick response and delivery.

Jacob E.

12/2/2023

still working, never had a problem since being installed.

Etrailer Expert

Mike L.

12/2/2023

@JacobE We're glad to hear that!


by:

Worked as a replacement for a different brand, called etrailer to verify that it would work and they confirmed. Great customer service, thank you. I was able to replace just the part instead of the whole vent, saved $$$!



by:

Our old vent operator's casing had split and was no longer able to lift and lower the vent, so we ordered a new replacement operator. It arrived on time and was very easy to install. The directions are clearly written. This immediately fixed the problem we had!



by:

the operators worked like original, and fit perfect. I ordered three and have a couple of spares. Thank you e-trailer, and also for the quick shipping.



by:

Works as designed



by:

Replacement for either the manual or motorized version. The original operator became worn and wouldn’t hold the lid down on the road. This fixed the problem.



by:

Great service. Fast, efficient and affordable. Got my hot dog trailer up, running and venting.
Thanks



by:

Fast and correct



by:

Part arrived ahead of schedule! Having replaced the original part once before, I was able to r&r the bad part& new part in about ten minutes. So two replacements in two years and ten months should be a wake up call for the manufacturer!



by:

Awesome replacement part!



by:

Very easy to order. Delivered in 4 days. Very happy my fan lid is working just fine.



by:

Great service, on time delivery. Products were great quality!!



by:

Haven't put it in yet, but it looks like the right one. Hoping it will keep the vent from popping open when traveling.



by:

The order was receive in good time. New package, already installed and working.
Thanks



by:

I have previously bought from etrailer.com and loved the product (an RV electric brake controller), the service, and especially the information provided on the site; all three aspects were excellent. I bought this section of RV fan because I looked up the specific section for the model of RV ventilation fan unit. Etrailer had that section cross referenced with the model of the unit, so it made it easy to find from a Google search. I ensured it was the right piece and I bought it. It works beautifully. Thank you for making my life a bit easier, etrailer.com. You have a loyal customer, who would recommend you to my priest, my father, my kids, and my best friend.



by:

item arrived fast and was correct. representative was very helpful.



by:

This was exactly what we needed to fix our roof vent. It was quick and easy to install and was a lot nicer than trying to turn the screw that was in place of the handle before we ordered this and fixed it.



by:

etrailer.com had the perfect replacement part I was looking for. Their web site was very easy to navigate, and their customer service was outstanding! The only issue that I had was a shipping mistake, which was 100% my fault. When I called for assistance, Brittany quickly and professionally resolved the problem, and my part arrived in just a couple of days. You've got a very satisfied customer that is going to share my experience with friends and family. Thank you Brittany!



by:

Exactly the part we needed.



by:

We got exactly what we ordered. I'd take a picture; but, it's now on top of my husband's camper! We had no idea what kind of trailer roof vent we needed and I happened to have taken a picture of the old one and googled the model # and found your website.


25
195
Show More Reviews

See what our Experts say about this Ventline Accessories and Parts

  • Availability Of Refrigerator Access Cover For Dometic RM1350/RM1350SL Refrigerator
    I am sorry to say that we do not carry the vent cover you are looking for. The only cover we have from Dometic is the # DMC37FR which is made for a 23-3/8" long x 6-1/2" wide cutout. So this is not going to match what you have at all. At this point I believe your best bet will be to contact Dometic directly to see if they have a replacement available.
    view full answer...
  • Replacement Plastic Knob For Ventline Ventadome V2119
    Yes, there is a screw that holds the plastic knob on that looks like a gear on the Ventline Ventadome Model V2119. The knob and screw can be replaced with part # BVD0462-00 which is also comes with the operating mechanism but the two parts you need are not sold individually.
    view full answer...
  • How to Pick the Correct Replacement Slide Out Seal for a 2007 Keystone Montana
    It sounds like you might be looking for a replacement seal for your slide out? If that's the case, then you're going to need to remove the existing and measure its dimensions as well as note the shape. With this information we should be easily able to find you the correct replacement. Unfortunately we are not able to find the correct replacement just base off of the YMM or serial of your trailer.
    view full answer...
  • Dimensions of Ventline Replacement Operating Arm # BVD0462-00
    I went and pulled one of the Ventline Operating Arms, part # BVD0462-00 and measured it for you. You can see the length of the arm in the photo I edited.
    view full answer...
    Image 1 for
  • Solution for Needing Replacement Operator Knob for Ventline Roof Vent
    Hey Kevin, so oddly enough Ventline doesn't offer just the knob so only way to get it is by replacing the operator as well like with the part # BVD0462-00. You can just use the knob though and not replace the operator.
    view full answer...
  • Picking Out Replacement Ventline Operator for 2016 Flagstaff Shamrock
    Hey Tim, what you need is a new lift operator like the # BVD0462-00 that you referenced but you'd need to make sure you have a Ventline roof vent for this to be correct. If the knob looks like what comes in this kit though then you'd know for sure it's correct.
    view full answer...
  • Ventline Model V2394 Operator and Crank Handle Replacement
    For a Ventline V2394 roof vent the correct replacement operator with crank handle is the part # BVD0462-00.
    view full answer...
  • Replacement Brackets for Westin Platinum Series Oval Nerf Bars
    We do not have replacement brackets for these at this time. I can see if Westin has a replacement and get it added to our site but I can tell you it will likely be all of the brackets and hardware. We don't have the ability to order specific brackets. If you want me to see if we can have these added please respond to my email and let me know.
    view full answer...
  • Replacement Arm Mechanism For an Older Ventline V2394
    For your older Ventline 2394, you can use the Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents w/ Wedge-Shaped Dome # BVD0462-00. This kit includes the operator, knob, and mounting screw and is made in the USA. Attached is a product oveview video for you to check out as well.
    view full answer...
  • Table Leg Replacement
    We unfortunately do not carry replacement table legs any more so I recommend reaching out to a local RV dealership since they have better access to OEM parts or might possibly just have some spare legs in stock for repairs that they could sell you.
    view full answer...
  • Width of the Operator Arm Channel on the Replacement Operator # BVD0462-00
    I went out into our warehouse and pulled a Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents # BVD0462-00 that you referenced and got the dimension you requested. The width of the channel on the operator arms is 1/8 of an inch like you need.
    view full answer...
    Image 1 for
  • Question About a Product
    Hey Carl, You might be able to reach out to the manufacturer of your trailer and get a replacement screen door slider, otherwise we can try replacing it going off of size. I've attached a link below to our selection of slides if you'd like to take a look.
    view full answer...
  • Ventline V2094 Replacement Knob and Operator
    What you will need is the part # BVD0462-00 as this is the replacement operator for your V2094 roof vent and it comes with a new knob that will work with the operator. It sounds like you may have an older style operator that requires a knob that we don't carry anymore.
    view full answer...
  • Replacement Lid Lifter Assembly for Ventline Roof Vent with VD0434 On Screen
    Hey Jeremy, thanks for the picture of your roof vent based on seeing that what you'd need is the part # BVD0462-00 that you referenced. Then for a replacement screen you'd want the part # BVD0434-31.
    view full answer...
  • Replacement Handle And Crank For A Ventline RV Vent
    If your Ventline Vent has a crank handle then you'll want the Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents w/ Wedge-Shaped Dome # BVD0462-00. If you have the T-Handle design that slides then you'll want the Replacement Handle Assembly for Ventline E-Z Lift Ventadome Trailer Roof Vents # BVC0580-00.
    view full answer...
  • Replacement Operator for Ventline V2119 RV Roof Vent
    According to my contact in the engineering department at Ventline, the cause of what you have going on is a damaged operator. The operator is the linkage between the motor and the vent lid. Look at the photo I've provided. If the housing around the operator is split at the seam indicated by the arrow in the photo, the operator is damaged and would need to be replaced using part # BVD0462-00. You won't need the knob and screw included with the operator because your vent has a powered lift.
    view full answer...
    Image 1 for
  • Replacement Motor/Operator Parts for a Ventline Ventadome V2119
    The Replacement Gear Motor with Pinion Gear # BVB0601-00 is the correct replacement for the Ventline Ventadome roof vent model V2119. It sounds like you also need the Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents # BVD0462-00, since yours is the powered version you will not use the knob and screw but would need the Replacement Plastic Gear for Ventline Ventadome Trailer Roof Vent # BVD0121-00. All of these parts are for the Ventline Ventadome roof vent...
    view full answer...
    Image 1 for
  • Ventlilne Ventilator Crank Arm Replacement And Cover
    For your application, the part that is broken is actually part of the crank arm assembly. You will want the Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents w/ Wedge-Shaped Dome # BVD0462-00 as that part is not a replacement option. This is to be used with the Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent - White - Wedge Shape - Plastic # BVD0449-A01 if you choose to replace the cover as well.
    view full answer...
    Image 1 for
  • Ventlilne Ceiling Vent Replacement Lid And Crank/Arm Assembly
    It sounds like you have the Ventline Ventadome because that is the Ventline ceiling vent name. For this I recommend the Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents w/ Wedge-Shaped Dome # BVD0462-00 as well as the Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent - White - Wedge Shape - Plastic # BVD0449-A01. If you have something else, please give me a part number or a picture and I'll be happy to further assist.
    view full answer...
  • How Does The White Dome Assembly For Ventadome Roof Vents Attach
    The White Dome Assembly for standard roof Ventadomes # BVD0449-A01 doesn't use any hinge clips to install. It simply pops onto the hinge, as seen in the attached installation video below. If you're referring to the lift arm then you'll need the Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents w/ Wedge-Shaped Dome # BVD0462-00.
    view full answer...
  • Availability of Replacement Lift Arm Assembly for Ventline Trailer Roof Vents
    The part I believe that you need is Replacement Operator, Knob and Screw, # BVD0462-00. These replacement parts will fit vents V2094 and V2119, just like the Replacement Fan Blade, # BVD0215-00, that you have referenced. If you had a vent with a metal dome vent, you would use part # BV0115-04.
    view full answer...
  • Replacement Arm Assembly Recommendation for a Powered Ventline Roof Vent
    It sounds like you have the Ventline Ventadome Roof Vent w/ 12V Fan # V2119-601-00. This Ventline roof vent has a powered lift arm assembly. The correct arm assembly replacement that you would need would be the Replacement Operator, Knob and Screw # BVD0462-00 that you referenced. The know and screw would not be used since your vent has an electric lift.
    view full answer...
  • Replacement Knob for Ventline VD0434 Trailer Roof Vent
    I do have some possible options for you but VD0434 is not the model number of the vent which is used for the identification of replacement parts, it's instead just the model number of the screen which is used on many different vents. The vent model number should be on a white sticker under the screen. I have attached a few options below based on what that number is. Replacement Operator with Knob and Screw part # BV0115-04 (V2110 and V2094) Replacement Operator with Knob and Screw part...
    view full answer...
  • Replacement Operator for Ventline Trailer Roof Vent V2094
    The lid that you referenced, # BV0554-01, fits vent V2094. The replacement operator for this vent is # BVD0462-00. It includes the control arm, knob, and screw. If you do not have a post-1995 Elixir Trailer Roof Vent or pre-2008 model V2094 then let me know the model you have and I can determine if we have a replacement for it.
    view full answer...


< Previous
12



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Rachael H
Expert Research:
Rachael H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Raymond P
Written by:
Raymond P
Employee Dustin K
Video by:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Hayden R
Installed by:
Hayden R
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Manda E
Updated by:
Manda E

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.