Replacement Cup Holder for Thomas Payne RV Recliners with Light, Massage, and Heat Functions

See what our Experts say about this Lippert Accessories and Parts

• Replacement Thomas Payne RV Sofa Cupholder with Most Features
  The replacement Thomas Payne RV cupholder that has the most features is the # LC38FR which has light, open, close, massage, heat, and lock/unlock buttons. If you let me know which specific sofa you have I can see which replacement you'd need.
  view full answer...
• Is My Thomas Payne Recliner The Momentum Series Or Seismic Series?
  The best way to determine if you have the Momentum or Seismic Series recliner is to look at the buttons on the Cupholder. The Momentum series should have only 3 buttons on the cupholder for light, massage and heat. The Seismic series will have 5 buttons. Light, open, close, massage, and heat. I have included pictures of both below for your reference. It sounds like yours does have all 5 functions on the cupholder controls, which would mean yours is the Seismic Series. If the the controls...
  view full answer...
  
• Replacement Cup Holder for a Thomas Payne Double Recliner
  The Replacement Cup Holder for Thomas Payne Momentum Recliners # 195-387597 will work for the Momentum series recliners (#'s 195-000055, 195-000056, 195-000055-056, 195-055-056-058, and 195-055-056-057) if you have one of those models then this will work for you. But it sounds like you have a double recliner with power recline which the # 195-387597 does not have. The Momentum series has release handles between the seat cushion and arm of the recliners to activate the footrests. The Replacement...
  view full answer...
• How To Remove Cupholder From 2019 Thomas Payne Seismic Recliners
  To remove the Cupholder # LC38FR on your 2019 Thomas Payne you will first insert a 1/2" flathead screwdriver or a butter knife into one of the two slots located at 9:30 and 11:30 on the plastic cupholder rings. Then twist the tool to pop off the plastic ring, making sure the lock button does not fall out of the ring. Using a Phillips screwdriver, remove the screws securing the assembly to the recliner and pull out the assembly and unplug it from the control box.
  view full answer...
  
• Troubleshooting Thomas Payne RV Love Seat with Cupholder That Light Flickers
  What seat do you have? It sounds like it's a bad cupholder based on what you mentioned and if you have a Thomas Payne Momentum setup the part # 195-387597 that you referenced would be correct for it.
  view full answer...
  
• Help Removing Thomas Payne Cupholder from Sofa
  I spoke with my contact at Lippert who said that there is a notch in the side of the cup holder that you should be able to feel with your hand. I attached a picture of where it is as well. Once you find it you will need to use a flathead screwdriver or a butter knife to pop it up. This will reveal 2 screws that you will need to take out before detaching the cup holder wiring from the arm.
  view full answer...
• Light Went Out on Thomas Payne Cupholder
  According to Lippert, the manufacturer, if the light went out on the cupholder, that generally means the connection is poor at the plug, so you'll want to check that. To do so, remove the rubber coaster from the bottom of the cupholder, and using a Phillips screwdriver, remove the screws securing the cupholder to the recliner, then pull out the assembly and unplug it from the control box and connectors. If it needs replacing the correct one, depending on what you have, is one of the following: -...
  view full answer...
• Thomas Payne Seismic Recliner Not Heating
  The Thomas Payne Seismic Left Arm Power RV Recliner w/ Heat, Massage, LED Lights # 195-000099,which is no longer available. does in fact have heating and cooling options. Start by checking the wiring of the heating pad for continuity when the heating function is turned on with # PT89ZR . If you are getting voltage but the seat still isn't heating you'll want to replace the heater with # 195-000113. If it's not the heating element, then it's more than likely the cupholder with # LC38FR,...
  view full answer...
• How Do You Remove the Cup Holder From a Thomas Payne Sofa?
  To get the cup holder removed, you will need to locate a notch inside the cup holder. You should be able to feel with your hand, but can be a little tedious. Once you find it, you will need to use a flathead screwdriver to pop it up as this will reveal 2 screws that need to be taken out. Once these are removed, you will be able to pull out the old cup holder.
  view full answer...
• Troubleshooting A Thomas Payne Recliner that Won't Retract
  What you can first try, if you have not already, is unplugging and plugging back in the sofa. You'll want to make sure to wait at least 10 minutes before restoring power. It also wouldn't hurt to check the wiring as well, and make sure you're checking for pinched wires or any broken/frayed wires. It is possible that the cupholder has gone bad. Since the cupholders control the functionality on the chairs, you can try and unplug the cupholder and checking to see if it works. If not, you...
  view full answer...

Do you have a question about this Accessories and Part?