Videos
for Race Ramps
Help Articles
for Race Ramps
Expert Answers
for Race Ramps
We don't have an option that will allow for all of them to be keyed alike but I can get you down to one key for the hasp locks and another for the coupler lock. The Trimax Puck Locks for Trailer Door Hasps #TMX73FR comes with three…
view full answer...The Superwinch S7500 Trailer Winch #SW1475201 is designed to have more of a "universal" style for mounting and may require some adaption for installation because it does not have a typical mounting pattern. The Superwinch S7500…
view full answer...You have a very unique situation. We don't have anything specific to help you with your angle directly, however, you have already done a lot of the work figuring angles and rise needed. I recommend using the Race Ramps Rack Ramps -…
view full answer...Most customers have stated when installing a hitch like the etrailer Trailer Hitch Receiver #e27KR on their Acura MDX they have had to remove the liftgate sensor entirely. Not all have though, as some were able to relocate it, but the only…
view full answer...Yes the Race Ramps XT Ramps for Service and Display #RR-XT-2 would work great with a 2001 Chevy Corvette. I attached a picture of a similar C6 Corvette on these ramps for you to check out as well.
view full answer...The TecNiq Industrial LED Scene Light #TN43XR has 3/16" diameter mounting holes spaced 16" apart on center (see attached).
view full answer...The only difference between 7-Way Utility and 7-Way RV is the color of the wires. The pin outs are the exact same so either would work just fine with the other. If you check out the picture I attached you'll see that the functions are all the…
view full answer...The underside of the Race Ramp steps like the part #RR-2STEP-24 that you referenced is closed. I attached a picture of what the bottom of the steps look like.
view full answer...Given the low ride height of a Corvette, going with the longer #RR-TR-9-FLP would be the better choice as you'd be less likely to high-side the vehicle when it enters the trailer. Both ramps have the same 5.5º approach angle but you'd…
view full answer...Yes, the etrailer.com Adjustable Trailer Coupler Latch Lock #e98883 that you referenced can be keyed alike. Once on the product page simply select "Keyed Alike" from the drop-down menu and all 4 locks you receive will use the same key.
view full answer...If you are only putting brakes like the #TRU36FR on one axle, we recommend doing the front axle for a few reasons. First, the front axle technically will bear more weight than the rear. Most trailers it would be about 60% on the front axle and 40% of…
view full answer...I would not automatically assume your trailer has a weight capacity of 20,000 lbs or more with two 10,000 lb axles. You must also consider the weight of the trailer itself and the Gross Vehicle Weight Rating (GVWR) of the trailer. The GVWR is the…
view full answer...
What our customers are saying:
"very easy to shop"