Most Popular Equal-i-zer
Videos
for Equal-i-zer
Help Articles
for Equal-i-zer
Expert Answers
for Equal-i-zer
Yes you can just swap out the bars on your Equal-i-zer Weight Distribution System w/ 4-Point Sway Control #EQ64FR with the Replacement Spring Bar for Equal-i-zer Weight Distribution Systems #EQ90-02-1499.
view full answer...The parts that are different between your 1,000 lb tongue weight rated Equal-i-zer kit part #EQ37100ET and the 1,600 lb tongue weight rated kit part #EQ64FR are just the spring bars and the head of the system. With that said the 1,600 lb tongue…
view full answer...The benefits of an Equal-I-zer hitch over the e2 is primarily the improved 4-point sway control of the Equal-I-zer. The 4-point sway control utilizes steel on steel friction at the arms as well as in the hitch head to stop sway. The e2's 2-point…
view full answer...The Equil-i-zer Weight Distribution with 4-Point Sway Control, like #EQ37041ET, differs from the Fastway e2 Weight Distribution with 2-Point Sway Control #FA92-00-0450, because it does utilize 2 more points of steel-on-steel friction at the head of…
view full answer...Unlike some weight distribution systems, the weight distribution head of the Equal-i-zer hitches also carries a bar-specific weight capacity so you unfortunately wouldn't be able to increase the weight capacity by just going with a higher rated…
view full answer...The Equal-I-zer, #EQ37100ET, and Reese Strait-Line, #RP66084, weight distribution systems are both top notch systems that will get the job done for you, but I usually tend to lean towards the Equal-I-zer systems for a few reasons. First, Equal-I-zer…
view full answer...An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. Measuring is not required if you just take a look at your coupler and see where it attaches to…
view full answer...What you really want to do when choosing a weight distribution system is try to get as choose to the middle of the systems capacity as possible. The typical tongue weight of a trailer will be anywhere from 10% to 15% of the total weight of the…
view full answer...Yes the Equal-i-zer weight distribution shank part #EQ90-02-4900 is essentially the exact same shank as the 90-02-4325 you mentioned with exact same dimensions and capacities.
view full answer...Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…
view full answer...That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together, I would…
view full answer...The Equal-I-Zer part #EQ64FR that you referenced can fit trailer frames that are up to 8 inches tall so it would work great on your trailer frame that is 8 inches tall.
view full answer...
What our customers are saying:
"I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex"