Videos
for AMPLock
Help Articles
for AMPLock
Expert Answers
for AMPLock
Hey Naron, the distance from the center of the hitch pin hole to the anti-rattle on the Diversi-Tech Ball Mount #DTSTBM6600-2S is right at 2 inches. I am not sure where you saw that is was 3.5 inches but that is too long.
view full answer...The distance from the center of the hitch pin hole to the center of the anti-rattle pin on the Flash Silent 2-Ball Mount #DTSTBM6600-2S is approximately 1-3/4".
view full answer...The distance from the center of the #DTSTBM6600-2S hitch pin hole to the center of the anti-rattle pin on top of the shank is 3-1/2".
view full answer...Depedning on what your trailer has we may have what you need. If your trailer has an underslung 2-5/16" ball coupler #AMP56FR is a great option. -If you have a flat lip 2" ball coupler, then the AMPLock Coupler Lock for Flat Lip…
view full answer...Trailer Hitch Pins like the Curt #C21500 do not have specific weight ratings and there is not a database available that will have this type of information. Generally speaking, a 5/8 inch diameter pin, which is designed for Class III, IV and V trailer…
view full answer...The AMPLock #AMP37FR is designed to fit on 2" receivers, so it will work on your 2020 Ford F-150's factory receiver. This hitch pin has a 2-13/16" span.
view full answer...That would depend on the height of the trailers you plan to tow, but unless you plan to tow something unusually small and low the 5 inch drop B and W Tow n Stow part #BWTS10048B would be what I think would be the best match for your truck. But if you…
view full answer...The Anti-Rattle Device and Lock, #63232, is made of chrome plated steel. It does not have an official capacity because it has a higher breaking point than a hitch or ball mount that would be used with it. I have included a link to a video showing how…
view full answer...The B&W Tow and Stow ball mount #BWTS10049B will have some great features. You can stow the mounting platform that has the 3 hitch balls (1-7/8, 2, and 2-5/16 inch) underneath your vehicle. This is nice because you will eliminate the possibility…
view full answer...The B&W Tow & Stow 3-Ball Mount #BWTS10049B measures approximately 5-1/4" from the top of the receiver to the top of the 2" ball when in the lowest position. Keep in mind that drop is measured from the top of the shank to the top of…
view full answer...For your application I recommend checking out the Self-Locking, Adjustable 2-Ball Mount w Stainless Balls #DTSTBM6600-2S. This fits a 2" hitch receiver with a 6" drop and comes with 2" and 2-5/16" stainless steel hitch balls that…
view full answer...I went out to our warehouse and measured the Solid-Tow Adjustable 2-Ball Mount part #DTSTBM6400-2S for you. The distance from the center of the hitch pin hole to the center of the stainless steel pin is 1-3/4". I have attached a photo of this…
view full answer...
What our customers are saying:
"You folks are fast. Thank you very much."