Videos
for MaxxTow
Help Articles
for MaxxTow
Expert Answers
for MaxxTow
When choosing tie-down straps like the BoatBuckle G2 Retractable Tie-Down Strap, #IMF14220, you will want to keep a few things in mind. Boat tie-downs are designed for normal highway driving. The purpose of most boat tie-downs is to strap the…
view full answer...I'm going to attach a dimensional drawing of the Timbren #TSR5KS02 for you to check out, and you won't want to install any type of spacer. I can see how what they're telling you might be confusing, but the suspension…
view full answer...We had the chance to install the Fastway coupler lock part #FA86-0015-318 on an actuator like your UFP A-60 and found that it fit and worked well. Check out the picture I attached to see the lock installed on the coupler.
view full answer...A pin with a 1/4 inch diameter, like part #e98886, is standard for coupler locks. Unfortunately there are none that are 1/16 of an inch larger in diameter. If instead you meant that you needed one with a span of 5/8 of an inch then you will want to…
view full answer...We have an aluminum 7 spoke 14 inch trailer wheel that looks pretty close to the wheel in the picture you sent us, but it's not an exact match. For that wheel you would want the part #AM22329. For a 205/75R14 you can use #AM10234 or tire #AM10229…
view full answer...If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…
view full answer...In order to help seal the Furrion Marine Speaker part #FMS5B to the trailer and prevent moisture from getting behind the speaker you can use some gasket maker, the Loctite RTV 598 High-Performance Silicone Gasket Maker part #LT37467 which will do a…
view full answer...Thank you so much for the photos and all of the info! Currently none of our manufacturers have an adapter that they have tested and approved to work with that connector you found on your 2022 Volkswagen Atlas, so you'll have to cut off that…
view full answer...I went over the install instructions for the Curt trailer wiring harness and there is no mention of needing to install the ring terminal that's included. That said the trailer wiring harness I recommend for your 2004 Jeep Grand Cherokee is the…
view full answer...I do have a solution, but the MaxxTow Off-Road light bar is not available. Instead, I recommend the Optronics LED Off-Road Light Bar #UCL22CB. This light bar is only slightly longer at 33" with the same mixed beam and double row design. The…
view full answer...If you're referring to the Fulton #F44314R0303 you looked at then you can use the Repair Kit for Fulton A-Frame Coupler #F640801. If you have the Buyers Products #3370091595, a replacement latch is not available which means you would need to…
view full answer...Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…
view full answer...
What our customers are saying:
"very easy to shop"