Most Popular SeeLeveL
Videos
for SeeLeveL
Help Articles
for SeeLeveL
Expert Answers
for SeeLeveL
Per SeeLevel, for a stacked configuration of the SeeLeveL Sensor for RV Holding Tank Monitor - 9" Long #SE88VR you just cut the top sensor.
view full answer...We have the 710-AR and 710-ES2 SeeLevel sensors, though I was unable to find any 701AR or 701ES2. If you were referring to the 710-AR and 710-ES2 you would need the following: - 710-AR: SeeLeveL Sensor #SE88VR - 710-ES2: SeeLeveL Sensor #SE78VR
view full answer...No, the SeeLeveL RV Holding Tank Monitor #SE84VR does not include the sensors. The sensors are sold separately. - SeeLeveL Sensor for RV Holding Tank Monitor #SE78VR (12") - SeeLeveL Sensor for RV Holding Tank Monitor #SE27VR (16")
view full answer...Yes, to get the SeeLeveL RV Holding Tank Monitor #SE34VR with the sensors you need the SeeLeveL RV Holding Tank Monitoring System #SE59VR. This comes with the same monitor along with 3 of the 12" long sensors you install on plastic tanks.
view full answer...There unfortunately isn't a guide to tell us the equalizer, shackle straps, and leaf spring sizing for your 2016 Grand Design Reflection 313RLTS so you'll need to a bit a of measuring to determine the best replacements. Before…
view full answer...We do have the SeeLeveL RV Holding Tank Monitor #SE84VR which monitors fresh, gray, black, and galley tanks. This is the closest we have to your fresh, galley, bath, and black tanks. Your bath would just be labeled gray instead of bath. This…
view full answer...Yes, 14 gauge wire seems too small. I would go with 10 or 12 gauge. For 10 gauge you can use #10-1-1 and for 12 gauge use #12-1-1. These wires are sold in increments of 1 foot. So if you needed 20 feet of wire you would enter 20 in the quantity…
view full answer...The SeeLevel Sensor part #SE27VR that you referenced runs on 12 volts.
view full answer...Yes we do carry the SeeLevel 709-2P with our part number #SE94VR. This is just the monitor you are looking for. The part #SE49VR that you mentioned includes the monitor but also sensors.
view full answer...It is a 3-way switch. The SeeLeveL RV Holding Tank Monitoring System, #SE39VR includes a panel that incorporates readings for sensors to track 3 holding tanks, display of battery voltage and includes water pump switch. The integrated switch…
view full answer...Yes, the Seelevel sensors like the part #SE78VR can be used on external mounted tanks exposed to water and roads like you asked about.
view full answer...Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power…
view full answer...
What our customers are saying:
"very easy to shop"