Most Popular Peterson
Videos
for Peterson
Help Articles
for Peterson
Expert Answers
for Peterson
So what you have currently is our part #435800 which we have a replacement LED style light for with the part #M826R-7. For an install grommet you'll then want the part #426-18 and for a wiring harness part #431-491 and you'd be set.
view full answer...The LumenX LED Trailer Tail Light #PE77ZV does not have a mounting gasket and in most situations it does not require one. If you are mounting to a weather tight compartment which can't get wet you will want to use the Kit #3724195 which…
view full answer...While we don't carry that exact part number we do have a replacement hub/drum that would work just as well with the part #AKHD-655-6-EZ-K. This is a 6k hub/drum that fits the spindles of the Timbren Axle Less Kit part #ASR1THDS03.
view full answer...Hey Philip so while we don't carry the exact spring you are looking for it does match the specs of the #e59SR so this would be a great solution. It's correct length at 23-1/8 inches and is for a 3,500 lb trailer axle like you have as…
view full answer...Hey Tom, all of the lights you mentioned are bright and will easily be visible but the Command #CE44VR is the brightest compared to the part #DG52721PB and #DG52720PB.
view full answer...We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer…
view full answer...Unfortunately I have no insight on what Ranger Trailer put on their boat trailers in 2006. All I have to go off is images I could find which looks like they use the Amber #MCL52AB or #MCL52AMB and Red #MCL52RB or #MCL52RMB. The difference is the…
view full answer...If you have Peterson lights currently that look like the Optronics taillights part #STL008RB then the mounting brackets you have now will work just fine as these were made to be basically an exact replacement. We don't have any L-brackets…
view full answer...Yes, the Timken Bearing Kit #TMK52VR will fit your 3,500 lb axle as it fits an standard #84 spindle. The only time this kit won't fit with a 3,500 lb axle is if the trailer/axle is made before the 2000's since that's about the time that…
view full answer...The easiest way to power your electric jack off of the 7-way and/or the battery is to install the Trailer Wiring Junction Box - 7 Terminals item #3375601100 and connect your jack to the 12v circuit that your battery would also be connected to. This…
view full answer...Two-wire LED clearance lights such as the Red #MCL32RB or the Amber #MCL44AB have one wire for the power lead and one ground wire. The wire that was attached to your old clearance lights will be spliced to the power wire of your new lights. The black…
view full answer...There isn't an exact angle to go off of when it it comes to shackle straps, but we try to them to sit in a 'W' shape to allow for the suspension to travel without binding up. Depending on the length of the shackle straps the angle can…
view full answer...
What our customers are saying:
"Thanks for my order super fast shipping quality excellent. will order again. thanks again. A+A+A+ to deal with."