Gen-Y Hitch Aluminum Loading Ramps Review Video

Yes. You will be able to use the Gen-Y Hitch Aluminum Loading Ramp Set - 84" Long x 14" Wide - 6,000 lbs #325-GH-R84 with your 1-3/4" lip. Since the gap between the hook and the ramp is 2 inches, you have enough room. I…

I won't be able to confirm exactly what ramp you need as I have no sort of database to reference for this but we do have a wide selection of ramps to choose from such as the Gen-Y Hitch Aluminum Loading Ramp Set part #GY52YR. These ramps…

Each of the Gen-Y Hitch Aluminum Loading Ramps in the Set #GH34FR weigh 94lbs.

For a Bobcat 331 that weighs up to 7,500 lbs I'd recommend the 10k ramps part #325-GH-R96 that you referenced which are 96 inches long and 15 inches wide. I attached a picture of a heavier tractor being loaded with these ramps as well as a…

The Stallion #288-07503 loading ramps are manufactured in China. For a US made alternative, check out the Gen-Y Hitch Heavy Duty Aluminum ramp set which measure 72 x 14 inches which we offer as part #325-GH-R72. I've linked to a…

For the pair of ramps that come with the #325-GH-R72 the total weight is 61 lbs.

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

Typically converting a mobile home axle is a challenge, but the drawing you provided shows that your spindle uses an #LM67048 outer bearing and #25580 inner bearing. These are both fairly common bearing sizes, so there is an available solution. To…

Typically the running light circuit will be noticeably dimmer than the brake/turn signal circuit, so what you described could be normal depending on how dim the lights are. Without seeing how dim the lights are it's hard to say for certain. If…

I was able to verify that the weight capacity for the Aluminum Car Hauler Ramp Set #288-07503 that you referenced is indeed 6,000 pounds (not kilograms) for the pair and 3,000 pounds per panel. The recommended maximum height of 16 inches is simply…

The Standard Trailer Light Kit with 25' Wire Harness part #TL29BK as I am sure you noticed grounds via the mounting hardware therefore there is not a singular ground wire. In order to attach this light to a wooden surface you will need to run a…

Safety chains or safety cables should be rated for the full loaded trailer weight. Most of the safety chains we have that are rated for your 6300-lb loaded trailer weight will have clevis or S hook connectors that are larger than 5/16-inch. Titan 5K…