Videos
for Stallion
Help Articles
for Stallion
Expert Answers
for Stallion
The longest folding ramps we have for you is the Arched Loading Ramp Set part #288-07432 for 1 or part #288-07432-2 for 2 which are 90" long. The 90" length will ensure the angle that will be required to load the generator in your truck bed…
view full answer...What will help prevent the bottoming out is a ramp set that is longer and has a bit of an upward bow like the #288-07489 has. Without knowing the length of your current ramps I can't say if these would be an improvement in that area. These are 65…
view full answer...I have another option for you, but due to the length of the ramp you would not want to use the Aluminum Car Hauler Ramp Set - 48" x 14-1/2" #288-07501 any higher than 12" as it could cause the ramp to not be secure and will be a pretty…
view full answer...The ramp set part #288-07489 that you referenced has a combined weight capacity of 3,000 lbs for both. Individually each has a 1,500 lb capacity and each ramp has three prongs that lean on the trailer. So each of them is rated for 500 lbs basically.…
view full answer...I was able to verify that the weight capacity for the Aluminum Car Hauler Ramp Set #288-07503 that you referenced is indeed 6,000 pounds (not kilograms) for the pair and 3,000 pounds per panel. The recommended maximum height of 16 inches is simply…
view full answer...Yes you can just swap out the bars on your Equal-i-zer Weight Distribution System w/ 4-Point Sway Control #EQ64FR with the Replacement Spring Bar for Equal-i-zer Weight Distribution Systems #EQ90-02-1499.
view full answer...The Stallion #288-07503 Car Hauler Ramps are a total of 14-1/2 inches wide, which includes the raised edges. These ramps would accommodate your 12 inch wide tires but keep in mind that the tire would ride on the raised edges. I'd suggest going…
view full answer...Yes, the Aluminum Car Hauler Ramps #288-07501 do come as a set of two ramps. These ramps are lightweight at just 17 lbs each but have a total capacity of 6,000 lbs so they can handle even large equipment. They also come with safety straps to connect…
view full answer...The 3000 lb capacity would mean that each ramp can handle a maximum of 1500 lbs applied to it or 3000 lbs for the pair. Since your tractor weighs 3500 lbs, I wouldn't use these ramps if the weight from both axles would be on the ramps at the same…
view full answer...I believe you are referring to the 1" prongs on the Stallion Aluminum Car Hauler Ramp Set #288-07503 that are designed to grab onto the small gap at the end of most trailers. This not only provides a secure connection when loading/unloading, but…
view full answer...The Stallion Arched Loading Ramp Set - Center Fold - Aluminum - 88-9/16" Long x 13" Wide - 1.5K #288-07452-2 will work well to get your golf cart into the bed of your Ram 2500 4x4. The maximum loading height for these ramps is 35 inches.…
view full answer...I went to our warehouse and laid flat one of the Stallion ramps in the set #288-07489. The tallest point in the arch is where the yellow safety sticker is placed and at this tallest point the height (or thickness, if you prefer) is 3-3/4-inches.
view full answer...
What our customers are saying:
"Received already. Yeow! Perfect fit. Thanks for getting the kit to me so quickly."