Will Race Ramps XT Ramps Work for 2001 Chevy Corvette

Question

Question:

Will these work on a 2001 Corvette?

asked by: Scott O

0

Expert Reply:

Yes the Race Ramps XT Ramps for Service and Display # RR-XT-2 would work great with a 2001 Chevy Corvette. I attached a picture of a similar C6 Corvette on these ramps for you to check out as well.

expert reply by: Jameson C

0

Vette using Ramps
(click to enlarge)

Answer 1

The Race Ramps Wheel Chock for Vehicle Service part #RR-WC-2 will fit on the main platform of the Race Ramps Heavy-Duty XT Ramps for Service and Display - 67" Long part #RR-XT-2-HD although it may hang off just a bit depending on the size of the…

view full answer...

Answer 2

According to my research, a 2023 Dodge Charger Redeye Widebody uses size 305/35-20 tires, which are 12 inches wide. For that size tire, the correct Race Ramps are the following: - Race Ramps XT Ramps for Service and Display - 67" Long - 10"…

view full answer...

Answer 3

The Ramps part #RR-56-2 should work for your 2014 Chevy Corvette Stingray, but you can pretty easily measure to find out. If you check out the attached picture you can see how to use a yardstick to determine if it will fit. The other option is 3 feet…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 10

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 11

For your 2024 Hyunda Santa Cruz we have the Curt 7-way kit part #C68JR that is a confirmed fit. This installs by plugging into a factory wiring connector on your vehicle which means a really easy install that doesn't require any splicing.

view full answer...

Answer 12

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Will Race Ramps XT Ramps Work for 2001 Chevy Corvette

Product Page this Question was Asked From

Continue Researching