Videos
for Blaylock Industries
Help Articles
for Blaylock Industries
Expert Answers
for Blaylock Industries
Hey Bill, so yeah we worded the fit of the lock you mentioned odd but it's not going to fit a 3 inch setup but we can help as we have the Blaylock EZ part #BLTL-60-40D that was designed for 3 inch diameter setups like you have.
view full answer...Yes, all you'll need to do is disconnect the three wires running from the converter section in your Progressive Dynamics 4100 #PD4135K from the AC distribution panel (circuit breaker, ground bus bar, neutral bus bar). This will cut the…
view full answer...The Progressive Dynamics 4100 Series RV Converter w/ Charge Wizard and AC/DC Distribution Panel #PD4135K is going to wire in the following fashion: On the front of the unit you'll have a green, white, and black wire. The green wire will connect…
view full answer...For tire covers, it really doesn't make a difference in function whether you use a dual tire cover like the Adco Tyre Gard Dual Axle RV Wheel Cover - 27" to 29" - Polar White #290-3923 or the Adco Ultra Tyre Gard RV Wheel Covers -…
view full answer...If the front part of your square-bodied coupler is approximately 3 inches tall, based on the inner dimensions of the lock the Blaylock EZ Lock Trailer Coupler Lock #BLTL-33 will work well for you. The #BLTL-33 has inner dimensions of 3-1/8 inches x…
view full answer...For the 205R16 tire on your Land Rover you can use the Rightline Gear Spare Tire Cover - 27" to 35" Diameter #RG87VR.
view full answer...Sure thing! The EZ Lock Trailer Coupler Lock #BLTL-20 is for Bulldog Collar-Lok-style couplers while the EZ Lock Trailer Coupler Lock #BLTL-33 is designed for Fulton, Shelby, Dutton-Lainson, Atwood, and similar couplers. I've attached some review…
view full answer...I can confirm for you that your 2019 Ford Ranger with the factory 7-way is indeed compatible with the Tow-Pro Liberty that comes with the wiring harness, which is the following part number: - Redarc Tow-Pro Liberty Brake Controller w/ Universal…
view full answer...It sounds like you may have the power and ground wires reversed. I have included an image below for the terminals on a 7-way connector so you can verify you are connecting to the correct wires on your trailer connector. The power terminal is located…
view full answer...We have a solution that will work great but the part #BLTL-20-40D would not be what you'd need as it is designed to fit a Bulldog Collar Lok coupler and is only 3-3/16 inches wide. The #FA86-0015-318 would instead be what I recommend as this fits…
view full answer...There is no need to install an inline fuse between the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger - 35 Amp item #PD4135K. The system includes a number of safety features. It has a reverse polarity…
view full answer...According to Progressive Dynamics, with the 35 amp Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger #PD4135K you will need 8 gauge wire. I have added a link to a video review for you to check out as well.
view full answer...
What our customers are saying:
"Fast and easy to make selection and order. Unit shipping same day!"